diff mbox series

[V6,5/7] iio: adc: Update return value checks

Message ID 1590684869-15400-6-git-send-email-jprakash@codeaurora.org
State Superseded
Headers show
Series iio: adc: Add support for QCOM SPMI PMIC7 ADC | expand

Commit Message

Jishnu Prakash May 28, 2020, 4:54 p.m. UTC
Clean up some return value checks to make code more compact.

Signed-off-by: Jishnu Prakash <jprakash@codeaurora.org>
---
 drivers/iio/adc/qcom-spmi-adc5.c | 10 ++++------
 1 file changed, 4 insertions(+), 6 deletions(-)

Comments

Jonathan Cameron May 31, 2020, 10:49 a.m. UTC | #1
On Thu, 28 May 2020 22:24:27 +0530
Jishnu Prakash <jprakash@codeaurora.org> wrote:

> Clean up some return value checks to make code more compact.
> 
> Signed-off-by: Jishnu Prakash <jprakash@codeaurora.org>

Applied.

Thanks,

J
> ---
>  drivers/iio/adc/qcom-spmi-adc5.c | 10 ++++------
>  1 file changed, 4 insertions(+), 6 deletions(-)
> 
> diff --git a/drivers/iio/adc/qcom-spmi-adc5.c b/drivers/iio/adc/qcom-spmi-adc5.c
> index dcc7599..3022313 100644
> --- a/drivers/iio/adc/qcom-spmi-adc5.c
> +++ b/drivers/iio/adc/qcom-spmi-adc5.c
> @@ -301,7 +301,7 @@ static int adc5_configure(struct adc5_chip *adc,
>  
>  	/* Read registers 0x42 through 0x46 */
>  	ret = adc5_read(adc, ADC5_USR_DIG_PARAM, buf, sizeof(buf));
> -	if (ret < 0)
> +	if (ret)
>  		return ret;
>  
>  	/* Digital param selection */
> @@ -388,7 +388,7 @@ static int adc5_do_conversion(struct adc5_chip *adc,
>  
>  	if (adc->poll_eoc) {
>  		ret = adc5_poll_wait_eoc(adc);
> -		if (ret < 0) {
> +		if (ret) {
>  			pr_err("EOC bit not set\n");
>  			goto unlock;
>  		}
> @@ -398,7 +398,7 @@ static int adc5_do_conversion(struct adc5_chip *adc,
>  		if (!ret) {
>  			pr_debug("Did not get completion timeout.\n");
>  			ret = adc5_poll_wait_eoc(adc);
> -			if (ret < 0) {
> +			if (ret) {
>  				pr_err("EOC bit not set\n");
>  				goto unlock;
>  			}
> @@ -516,8 +516,6 @@ static int adc5_read_raw(struct iio_dev *indio_dev,
>  	default:
>  		return -EINVAL;
>  	}
> -
> -	return 0;
>  }
>  
>  static int adc7_read_raw(struct iio_dev *indio_dev,
> @@ -761,7 +759,7 @@ static int adc5_get_dt_channel_data(struct adc5_chip *adc,
>  
>  		ret = adc5_read(adc, ADC5_USR_REVISION1, dig_version,
>  							sizeof(dig_version));
> -		if (ret < 0) {
> +		if (ret) {
>  			dev_err(dev, "Invalid dig version read %d\n", ret);
>  			return ret;
>  		}
diff mbox series

Patch

diff --git a/drivers/iio/adc/qcom-spmi-adc5.c b/drivers/iio/adc/qcom-spmi-adc5.c
index dcc7599..3022313 100644
--- a/drivers/iio/adc/qcom-spmi-adc5.c
+++ b/drivers/iio/adc/qcom-spmi-adc5.c
@@ -301,7 +301,7 @@  static int adc5_configure(struct adc5_chip *adc,
 
 	/* Read registers 0x42 through 0x46 */
 	ret = adc5_read(adc, ADC5_USR_DIG_PARAM, buf, sizeof(buf));
-	if (ret < 0)
+	if (ret)
 		return ret;
 
 	/* Digital param selection */
@@ -388,7 +388,7 @@  static int adc5_do_conversion(struct adc5_chip *adc,
 
 	if (adc->poll_eoc) {
 		ret = adc5_poll_wait_eoc(adc);
-		if (ret < 0) {
+		if (ret) {
 			pr_err("EOC bit not set\n");
 			goto unlock;
 		}
@@ -398,7 +398,7 @@  static int adc5_do_conversion(struct adc5_chip *adc,
 		if (!ret) {
 			pr_debug("Did not get completion timeout.\n");
 			ret = adc5_poll_wait_eoc(adc);
-			if (ret < 0) {
+			if (ret) {
 				pr_err("EOC bit not set\n");
 				goto unlock;
 			}
@@ -516,8 +516,6 @@  static int adc5_read_raw(struct iio_dev *indio_dev,
 	default:
 		return -EINVAL;
 	}
-
-	return 0;
 }
 
 static int adc7_read_raw(struct iio_dev *indio_dev,
@@ -761,7 +759,7 @@  static int adc5_get_dt_channel_data(struct adc5_chip *adc,
 
 		ret = adc5_read(adc, ADC5_USR_REVISION1, dig_version,
 							sizeof(dig_version));
-		if (ret < 0) {
+		if (ret) {
 			dev_err(dev, "Invalid dig version read %d\n", ret);
 			return ret;
 		}