diff mbox series

[v6,06/10] mhi: pci_generic: Add suspend/resume/recovery procedure

Message ID 1609231431-10048-7-git-send-email-loic.poulain@linaro.org
State Superseded
Headers show
Series mhi: pci_generic: Misc improvements | expand

Commit Message

Loic Poulain Dec. 29, 2020, 8:43 a.m. UTC
Add support for system wide suspend/resume. During suspend, MHI
device controller must be put in M3 state and PCI bus in D3 state.

Add a recovery procedure allowing to reinitialize the device in case
of error during resume steps, which can happen if device loses power
(and so its context) while system suspend.

Signed-off-by: Loic Poulain <loic.poulain@linaro.org>

Reviewed-by Hemant Kumar <hemantk@codeaurora.org>
---
 drivers/bus/mhi/pci_generic.c | 105 ++++++++++++++++++++++++++++++++++++++++++
 1 file changed, 105 insertions(+)

-- 
2.7.4

Comments

Manivannan Sadhasivam Dec. 31, 2020, 7:05 a.m. UTC | #1
On Tue, Dec 29, 2020 at 09:43:47AM +0100, Loic Poulain wrote:
> Add support for system wide suspend/resume. During suspend, MHI

> device controller must be put in M3 state and PCI bus in D3 state.

> 

> Add a recovery procedure allowing to reinitialize the device in case

> of error during resume steps, which can happen if device loses power

> (and so its context) while system suspend.

> 

> Signed-off-by: Loic Poulain <loic.poulain@linaro.org>

> Reviewed-by Hemant Kumar <hemantk@codeaurora.org>


Reviewed-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org>


Thanks,
Mani

> ---

>  drivers/bus/mhi/pci_generic.c | 105 ++++++++++++++++++++++++++++++++++++++++++

>  1 file changed, 105 insertions(+)

> 

> diff --git a/drivers/bus/mhi/pci_generic.c b/drivers/bus/mhi/pci_generic.c

> index 2521cd4..3297d95 100644

> --- a/drivers/bus/mhi/pci_generic.c

> +++ b/drivers/bus/mhi/pci_generic.c

> @@ -13,6 +13,7 @@

>  #include <linux/mhi.h>

>  #include <linux/module.h>

>  #include <linux/pci.h>

> +#include <linux/workqueue.h>

>  

>  #define MHI_PCI_DEFAULT_BAR_NUM 0

>  

> @@ -186,6 +187,7 @@ enum mhi_pci_device_status {

>  struct mhi_pci_device {

>  	struct mhi_controller mhi_cntrl;

>  	struct pci_saved_state *pci_state;

> +	struct work_struct recovery_work;

>  	unsigned long status;

>  };

>  

> @@ -313,6 +315,50 @@ static void mhi_pci_runtime_put(struct mhi_controller *mhi_cntrl)

>  	/* no PM for now */

>  }

>  

> +static void mhi_pci_recovery_work(struct work_struct *work)

> +{

> +	struct mhi_pci_device *mhi_pdev = container_of(work, struct mhi_pci_device,

> +						       recovery_work);

> +	struct mhi_controller *mhi_cntrl = &mhi_pdev->mhi_cntrl;

> +	struct pci_dev *pdev = to_pci_dev(mhi_cntrl->cntrl_dev);

> +	int err;

> +

> +	dev_warn(&pdev->dev, "device recovery started\n");

> +

> +	/* Clean up MHI state */

> +	if (test_and_clear_bit(MHI_PCI_DEV_STARTED, &mhi_pdev->status)) {

> +		mhi_power_down(mhi_cntrl, false);

> +		mhi_unprepare_after_power_down(mhi_cntrl);

> +	}

> +

> +	/* Check if we can recover without full reset */

> +	pci_set_power_state(pdev, PCI_D0);

> +	pci_load_saved_state(pdev, mhi_pdev->pci_state);

> +	pci_restore_state(pdev);

> +

> +	if (!mhi_pci_is_alive(mhi_cntrl))

> +		goto err_try_reset;

> +

> +	err = mhi_prepare_for_power_up(mhi_cntrl);

> +	if (err)

> +		goto err_try_reset;

> +

> +	err = mhi_sync_power_up(mhi_cntrl);

> +	if (err)

> +		goto err_unprepare;

> +

> +	dev_dbg(&pdev->dev, "Recovery completed\n");

> +

> +	set_bit(MHI_PCI_DEV_STARTED, &mhi_pdev->status);

> +	return;

> +

> +err_unprepare:

> +	mhi_unprepare_after_power_down(mhi_cntrl);

> +err_try_reset:

> +	if (pci_reset_function(pdev))

> +		dev_err(&pdev->dev, "Recovery failed\n");

> +}

> +

>  static int mhi_pci_probe(struct pci_dev *pdev, const struct pci_device_id *id)

>  {

>  	const struct mhi_pci_dev_info *info = (struct mhi_pci_dev_info *) id->driver_data;

> @@ -327,6 +373,8 @@ static int mhi_pci_probe(struct pci_dev *pdev, const struct pci_device_id *id)

>  	if (!mhi_pdev)

>  		return -ENOMEM;

>  

> +	INIT_WORK(&mhi_pdev->recovery_work, mhi_pci_recovery_work);

> +

>  	mhi_cntrl_config = info->config;

>  	mhi_cntrl = &mhi_pdev->mhi_cntrl;

>  

> @@ -391,6 +439,8 @@ static void mhi_pci_remove(struct pci_dev *pdev)

>  	struct mhi_pci_device *mhi_pdev = pci_get_drvdata(pdev);

>  	struct mhi_controller *mhi_cntrl = &mhi_pdev->mhi_cntrl;

>  

> +	cancel_work_sync(&mhi_pdev->recovery_work);

> +

>  	if (test_and_clear_bit(MHI_PCI_DEV_STARTED, &mhi_pdev->status)) {

>  		mhi_power_down(mhi_cntrl, true);

>  		mhi_unprepare_after_power_down(mhi_cntrl);

> @@ -456,12 +506,67 @@ static const struct pci_error_handlers mhi_pci_err_handler = {

>  	.reset_done = mhi_pci_reset_done,

>  };

>  

> +static int  __maybe_unused mhi_pci_suspend(struct device *dev)

> +{

> +	struct pci_dev *pdev = to_pci_dev(dev);

> +	struct mhi_pci_device *mhi_pdev = dev_get_drvdata(dev);

> +	struct mhi_controller *mhi_cntrl = &mhi_pdev->mhi_cntrl;

> +

> +	cancel_work_sync(&mhi_pdev->recovery_work);

> +

> +	/* Transition to M3 state */

> +	mhi_pm_suspend(mhi_cntrl);

> +

> +	pci_save_state(pdev);

> +	pci_disable_device(pdev);

> +	pci_wake_from_d3(pdev, true);

> +	pci_set_power_state(pdev, PCI_D3hot);

> +

> +	return 0;

> +}

> +

> +static int __maybe_unused mhi_pci_resume(struct device *dev)

> +{

> +	struct pci_dev *pdev = to_pci_dev(dev);

> +	struct mhi_pci_device *mhi_pdev = dev_get_drvdata(dev);

> +	struct mhi_controller *mhi_cntrl = &mhi_pdev->mhi_cntrl;

> +	int err;

> +

> +	pci_set_power_state(pdev, PCI_D0);

> +	pci_restore_state(pdev);

> +	pci_set_master(pdev);

> +

> +	err = pci_enable_device(pdev);

> +	if (err)

> +		goto err_recovery;

> +

> +	/* Exit M3, transition to M0 state */

> +	err = mhi_pm_resume(mhi_cntrl);

> +	if (err) {

> +		dev_err(&pdev->dev, "failed to resume device: %d\n", err);

> +		goto err_recovery;

> +	}

> +

> +	return 0;

> +

> +err_recovery:

> +	/* The device may have loose power or crashed, try recovering it */

> +	queue_work(system_long_wq, &mhi_pdev->recovery_work);

> +

> +	return err;

> +}

> +

> +static const struct dev_pm_ops mhi_pci_pm_ops = {

> +	SET_SYSTEM_SLEEP_PM_OPS(mhi_pci_suspend, mhi_pci_resume)

> +};

> +

>  static struct pci_driver mhi_pci_driver = {

>  	.name		= "mhi-pci-generic",

>  	.id_table	= mhi_pci_id_table,

>  	.probe		= mhi_pci_probe,

>  	.remove		= mhi_pci_remove,

>  	.err_handler	= &mhi_pci_err_handler,

> +	.driver.pm	= &mhi_pci_pm_ops

>  };

>  module_pci_driver(mhi_pci_driver);

>  

> -- 

> 2.7.4

>
diff mbox series

Patch

diff --git a/drivers/bus/mhi/pci_generic.c b/drivers/bus/mhi/pci_generic.c
index 2521cd4..3297d95 100644
--- a/drivers/bus/mhi/pci_generic.c
+++ b/drivers/bus/mhi/pci_generic.c
@@ -13,6 +13,7 @@ 
 #include <linux/mhi.h>
 #include <linux/module.h>
 #include <linux/pci.h>
+#include <linux/workqueue.h>
 
 #define MHI_PCI_DEFAULT_BAR_NUM 0
 
@@ -186,6 +187,7 @@  enum mhi_pci_device_status {
 struct mhi_pci_device {
 	struct mhi_controller mhi_cntrl;
 	struct pci_saved_state *pci_state;
+	struct work_struct recovery_work;
 	unsigned long status;
 };
 
@@ -313,6 +315,50 @@  static void mhi_pci_runtime_put(struct mhi_controller *mhi_cntrl)
 	/* no PM for now */
 }
 
+static void mhi_pci_recovery_work(struct work_struct *work)
+{
+	struct mhi_pci_device *mhi_pdev = container_of(work, struct mhi_pci_device,
+						       recovery_work);
+	struct mhi_controller *mhi_cntrl = &mhi_pdev->mhi_cntrl;
+	struct pci_dev *pdev = to_pci_dev(mhi_cntrl->cntrl_dev);
+	int err;
+
+	dev_warn(&pdev->dev, "device recovery started\n");
+
+	/* Clean up MHI state */
+	if (test_and_clear_bit(MHI_PCI_DEV_STARTED, &mhi_pdev->status)) {
+		mhi_power_down(mhi_cntrl, false);
+		mhi_unprepare_after_power_down(mhi_cntrl);
+	}
+
+	/* Check if we can recover without full reset */
+	pci_set_power_state(pdev, PCI_D0);
+	pci_load_saved_state(pdev, mhi_pdev->pci_state);
+	pci_restore_state(pdev);
+
+	if (!mhi_pci_is_alive(mhi_cntrl))
+		goto err_try_reset;
+
+	err = mhi_prepare_for_power_up(mhi_cntrl);
+	if (err)
+		goto err_try_reset;
+
+	err = mhi_sync_power_up(mhi_cntrl);
+	if (err)
+		goto err_unprepare;
+
+	dev_dbg(&pdev->dev, "Recovery completed\n");
+
+	set_bit(MHI_PCI_DEV_STARTED, &mhi_pdev->status);
+	return;
+
+err_unprepare:
+	mhi_unprepare_after_power_down(mhi_cntrl);
+err_try_reset:
+	if (pci_reset_function(pdev))
+		dev_err(&pdev->dev, "Recovery failed\n");
+}
+
 static int mhi_pci_probe(struct pci_dev *pdev, const struct pci_device_id *id)
 {
 	const struct mhi_pci_dev_info *info = (struct mhi_pci_dev_info *) id->driver_data;
@@ -327,6 +373,8 @@  static int mhi_pci_probe(struct pci_dev *pdev, const struct pci_device_id *id)
 	if (!mhi_pdev)
 		return -ENOMEM;
 
+	INIT_WORK(&mhi_pdev->recovery_work, mhi_pci_recovery_work);
+
 	mhi_cntrl_config = info->config;
 	mhi_cntrl = &mhi_pdev->mhi_cntrl;
 
@@ -391,6 +439,8 @@  static void mhi_pci_remove(struct pci_dev *pdev)
 	struct mhi_pci_device *mhi_pdev = pci_get_drvdata(pdev);
 	struct mhi_controller *mhi_cntrl = &mhi_pdev->mhi_cntrl;
 
+	cancel_work_sync(&mhi_pdev->recovery_work);
+
 	if (test_and_clear_bit(MHI_PCI_DEV_STARTED, &mhi_pdev->status)) {
 		mhi_power_down(mhi_cntrl, true);
 		mhi_unprepare_after_power_down(mhi_cntrl);
@@ -456,12 +506,67 @@  static const struct pci_error_handlers mhi_pci_err_handler = {
 	.reset_done = mhi_pci_reset_done,
 };
 
+static int  __maybe_unused mhi_pci_suspend(struct device *dev)
+{
+	struct pci_dev *pdev = to_pci_dev(dev);
+	struct mhi_pci_device *mhi_pdev = dev_get_drvdata(dev);
+	struct mhi_controller *mhi_cntrl = &mhi_pdev->mhi_cntrl;
+
+	cancel_work_sync(&mhi_pdev->recovery_work);
+
+	/* Transition to M3 state */
+	mhi_pm_suspend(mhi_cntrl);
+
+	pci_save_state(pdev);
+	pci_disable_device(pdev);
+	pci_wake_from_d3(pdev, true);
+	pci_set_power_state(pdev, PCI_D3hot);
+
+	return 0;
+}
+
+static int __maybe_unused mhi_pci_resume(struct device *dev)
+{
+	struct pci_dev *pdev = to_pci_dev(dev);
+	struct mhi_pci_device *mhi_pdev = dev_get_drvdata(dev);
+	struct mhi_controller *mhi_cntrl = &mhi_pdev->mhi_cntrl;
+	int err;
+
+	pci_set_power_state(pdev, PCI_D0);
+	pci_restore_state(pdev);
+	pci_set_master(pdev);
+
+	err = pci_enable_device(pdev);
+	if (err)
+		goto err_recovery;
+
+	/* Exit M3, transition to M0 state */
+	err = mhi_pm_resume(mhi_cntrl);
+	if (err) {
+		dev_err(&pdev->dev, "failed to resume device: %d\n", err);
+		goto err_recovery;
+	}
+
+	return 0;
+
+err_recovery:
+	/* The device may have loose power or crashed, try recovering it */
+	queue_work(system_long_wq, &mhi_pdev->recovery_work);
+
+	return err;
+}
+
+static const struct dev_pm_ops mhi_pci_pm_ops = {
+	SET_SYSTEM_SLEEP_PM_OPS(mhi_pci_suspend, mhi_pci_resume)
+};
+
 static struct pci_driver mhi_pci_driver = {
 	.name		= "mhi-pci-generic",
 	.id_table	= mhi_pci_id_table,
 	.probe		= mhi_pci_probe,
 	.remove		= mhi_pci_remove,
 	.err_handler	= &mhi_pci_err_handler,
+	.driver.pm	= &mhi_pci_pm_ops
 };
 module_pci_driver(mhi_pci_driver);