@@ -3,6 +3,8 @@
* Copyright (c) 2021, Linaro Limited
*/
+#include <dt-bindings/input/input.h>
+#include <dt-bindings/input/linux-event-codes.h>
#include <dt-bindings/interrupt-controller/irq.h>
#include <dt-bindings/spmi/spmi.h>
@@ -13,10 +15,57 @@
#address-cells = <1>;
#size-cells = <0>;
+ pmk8350_pon: pon@1300 {
+ compatible = "qcom,pm8998-pon";
+ reg = <0x1300>;
+
+ pwrkey {
+ compatible = "qcom,pmk8350-pwrkey";
+ interrupts = <0x0 0x13 0x7 IRQ_TYPE_EDGE_BOTH>;
+ linux,code = <KEY_POWER>;
+ };
+
+ resin {
+ compatible = "qcom,pmk8350-resin";
+ interrupts = <0x0 0x13 0x6 IRQ_TYPE_EDGE_BOTH>;
+ linux,code = <KEY_VOLUMEDOWN>;
+ };
+ };
+
+ pmk8350_vadc: adc@3100 {
+ compatible = "qcom,spmi-adc7";
+ reg = <0x3100>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+ interrupts = <0x0 0x31 0x0 IRQ_TYPE_EDGE_RISING>;
+ interrupt-names = "eoc-int-en-set";
+ #io-channel-cells = <1>;
+ io-channel-ranges;
+ };
+
+ pmk8350_adc_tm: adc-tm@3400 {
+ compatible = "qcom,adc-tm7";
+ reg = <0x3400>;
+ interrupts = <0x0 0x34 0x0 IRQ_TYPE_EDGE_RISING>;
+ interrupt-names = "threshold";
+ #address-cells = <1>;
+ #size-cells = <0>;
+ #thermal-sensor-cells = <1>;
+ status = "disabled";
+ };
+
+ pmk8350_rtc: rtc@6100 {
+ compatible = "qcom,pmk8350-rtc";
+ reg = <0x6100>, <0x6200>;
+ reg-names = "rtc", "alarm";
+ interrupts = <0x0 0x62 0x1 IRQ_TYPE_EDGE_RISING>;
+ };
+
pmk8350_gpios: gpio@b000 {
- compatible = "qcom,pmk8350-gpio";
+ compatible = "qcom,pmk8350-gpio", "qcom,spmi-gpio";
reg = <0xb000>;
gpio-controller;
+ gpio-ranges = <&pmk8350_gpios 0 0 4>;
#gpio-cells = <2>;
interrupt-controller;
#interrupt-cells = <2>;
Add PON, RTC, VADC and ACD_TM support for PMK8350. Signed-off-by: satya priya <skakit@codeaurora.org> --- arch/arm64/boot/dts/qcom/pmk8350.dtsi | 51 ++++++++++++++++++++++++++++++++++- 1 file changed, 50 insertions(+), 1 deletion(-)