| Message ID | 1651482395-29443-5-git-send-email-quic_rohiagar@quicinc.com |
|---|---|
| State | Accepted |
| Commit | eeaec4f2b926ffcb35a9c1c4af549ac9f7a6ce56 |
| Headers | show |
| Series | None | expand |
On Mon, May 02, 2022 at 02:36:35PM +0530, Rohit Agarwal wrote: > Enable the support for USB3 controller, QMP PHY and HS PHY on SDX65 MTP. > > Signed-off-by: Rohit Agarwal <quic_rohiagar@quicinc.com> I hope you have tested the interface using a gadget driver. Reviewed-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org> Thanks, Mani > --- > arch/arm/boot/dts/qcom-sdx65-mtp.dts | 29 +++++++++++++++++++++++++---- > 1 file changed, 25 insertions(+), 4 deletions(-) > > diff --git a/arch/arm/boot/dts/qcom-sdx65-mtp.dts b/arch/arm/boot/dts/qcom-sdx65-mtp.dts > index 79dc31a..6920524 100644 > --- a/arch/arm/boot/dts/qcom-sdx65-mtp.dts > +++ b/arch/arm/boot/dts/qcom-sdx65-mtp.dts > @@ -123,7 +123,7 @@ > regulator-max-microvolt = <1300000>; > }; > > - ldo1 { > + vreg_l1b_1p2: ldo1 { > regulator-min-microvolt = <1200000>; > regulator-max-microvolt = <1200000>; > regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; > @@ -141,13 +141,13 @@ > regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; > }; > > - ldo4 { > + vreg_l4b_0p88: ldo4 { > regulator-min-microvolt = <880000>; > regulator-max-microvolt = <912000>; > regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; > }; > > - ldo5 { > + vreg_l5b_1p8: ldo5 { > regulator-min-microvolt = <1800000>; > regulator-max-microvolt = <1800000>; > regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; > @@ -177,7 +177,7 @@ > regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; > }; > > - ldo10 { > + vreg_l10b_3p08: ldo10 { > regulator-min-microvolt = <3088000>; > regulator-max-microvolt = <3088000>; > regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; > @@ -244,3 +244,24 @@ > }; > }; > }; > + > +&usb { > + status = "okay"; > +}; > + > +&usb_dwc3 { > + dr_mode = "peripheral"; > +}; > + > +&usb_hsphy { > + status = "okay"; > + vdda-pll-supply = <&vreg_l4b_0p88>; > + vdda33-supply = <&vreg_l10b_3p08>; > + vdda18-supply = <&vreg_l5b_1p8>; > +}; > + > +&usb_qmpphy { > + status = "okay"; > + vdda-phy-supply = <&vreg_l4b_0p88>; > + vdda-pll-supply = <&vreg_l1b_1p2>; > +}; > -- > 2.7.4 >
diff --git a/arch/arm/boot/dts/qcom-sdx65-mtp.dts b/arch/arm/boot/dts/qcom-sdx65-mtp.dts index 79dc31a..6920524 100644 --- a/arch/arm/boot/dts/qcom-sdx65-mtp.dts +++ b/arch/arm/boot/dts/qcom-sdx65-mtp.dts @@ -123,7 +123,7 @@ regulator-max-microvolt = <1300000>; }; - ldo1 { + vreg_l1b_1p2: ldo1 { regulator-min-microvolt = <1200000>; regulator-max-microvolt = <1200000>; regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; @@ -141,13 +141,13 @@ regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; }; - ldo4 { + vreg_l4b_0p88: ldo4 { regulator-min-microvolt = <880000>; regulator-max-microvolt = <912000>; regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; }; - ldo5 { + vreg_l5b_1p8: ldo5 { regulator-min-microvolt = <1800000>; regulator-max-microvolt = <1800000>; regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; @@ -177,7 +177,7 @@ regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; }; - ldo10 { + vreg_l10b_3p08: ldo10 { regulator-min-microvolt = <3088000>; regulator-max-microvolt = <3088000>; regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; @@ -244,3 +244,24 @@ }; }; }; + +&usb { + status = "okay"; +}; + +&usb_dwc3 { + dr_mode = "peripheral"; +}; + +&usb_hsphy { + status = "okay"; + vdda-pll-supply = <&vreg_l4b_0p88>; + vdda33-supply = <&vreg_l10b_3p08>; + vdda18-supply = <&vreg_l5b_1p8>; +}; + +&usb_qmpphy { + status = "okay"; + vdda-phy-supply = <&vreg_l4b_0p88>; + vdda-pll-supply = <&vreg_l1b_1p2>; +};
Enable the support for USB3 controller, QMP PHY and HS PHY on SDX65 MTP. Signed-off-by: Rohit Agarwal <quic_rohiagar@quicinc.com> --- arch/arm/boot/dts/qcom-sdx65-mtp.dts | 29 +++++++++++++++++++++++++---- 1 file changed, 25 insertions(+), 4 deletions(-)