diff mbox series

[v12,03/14] drm/msm/disp/dpu: wait for extra vsync till timing engine status is disabled

Message ID 1675091494-13988-4-git-send-email-quic_vpolimer@quicinc.com
State Superseded
Headers show
Series Add PSR support for eDP | expand

Commit Message

Vinod Polimera Jan. 30, 2023, 3:11 p.m. UTC 
There can be a race between timing gen disable and vblank irq. The
wait post timing gen disable may return early but intf disable sequence
might not be completed. Ensure that, intf status is disabled before
we retire the function.

Signed-off-by: Vinod Polimera <quic_vpolimer@quicinc.com>
Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
---
 .../gpu/drm/msm/disp/dpu1/dpu_encoder_phys_vid.c    | 21 +++++++++++++++++++++
 1 file changed, 21 insertions(+)
diff mbox series

Patch

diff --git a/drivers/gpu/drm/msm/disp/dpu1/dpu_encoder_phys_vid.c b/drivers/gpu/drm/msm/disp/dpu1/dpu_encoder_phys_vid.c
index 48c4810..0396084 100644
--- a/drivers/gpu/drm/msm/disp/dpu1/dpu_encoder_phys_vid.c
+++ b/drivers/gpu/drm/msm/disp/dpu1/dpu_encoder_phys_vid.c
@@ -523,6 +523,7 @@  static void dpu_encoder_phys_vid_disable(struct dpu_encoder_phys *phys_enc)
 {
 	unsigned long lock_flags;
 	int ret;
+	struct intf_status intf_status = {0};
 
 	if (!phys_enc->parent || !phys_enc->parent->dev) {
 		DPU_ERROR("invalid encoder/device\n");
@@ -567,6 +568,26 @@  static void dpu_encoder_phys_vid_disable(struct dpu_encoder_phys *phys_enc)
 		}
 	}
 
+	if (phys_enc->hw_intf && phys_enc->hw_intf->ops.get_status)
+		phys_enc->hw_intf->ops.get_status(phys_enc->hw_intf, &intf_status);
+
+	/*
+	 * Wait for a vsync if timing en status is on after timing engine
+	 * is disabled.
+	 */
+	if (intf_status.is_en && dpu_encoder_phys_vid_is_master(phys_enc)) {
+		spin_lock_irqsave(phys_enc->enc_spinlock, lock_flags);
+		dpu_encoder_phys_inc_pending(phys_enc);
+		spin_unlock_irqrestore(phys_enc->enc_spinlock, lock_flags);
+		ret = dpu_encoder_phys_vid_wait_for_vblank(phys_enc);
+		if (ret) {
+			atomic_set(&phys_enc->pending_kickoff_cnt, 0);
+			DRM_ERROR("wait disable failed: id:%u intf:%d ret:%d\n",
+				  DRMID(phys_enc->parent),
+				  phys_enc->hw_intf->idx - INTF_0, ret);
+		}
+	}
+
 	phys_enc->enable_state = DPU_ENC_DISABLED;
 }