| Message ID | 1696632910-21942-6-git-send-email-quic_khsieh@quicinc.com |
|---|---|
| State | Superseded |
| Headers | show |
| Series | incorporate pm runtime framework and eDP clean up | expand |
On Sat, 7 Oct 2023 at 01:55, Kuogee Hsieh <quic_khsieh@quicinc.com> wrote: > > Currently DP driver is executed independent of PM runtime framework. > This leads msm eDP panel can not being detected by edp_panel driver > during generic_edp_panel_probe() due to AUX DPCD read failed at > edp panel driver. Incorporate PM runtime framework into DP driver so > that host controller's power and clocks are enable/disable through > PM runtime mechanism. Once PM runtime framework is incorporated into > DP driver, waking up device from power up path is not necessary. Hence > remove it. > > After incorporating pm_runtime framework into eDP/DP driver, > dp_pm_suspend() to handle power off both DP phy and controller during > suspend and dp_pm_resume() to handle power on both DP phy and controller > during resume are not necessary. Therefore both dp_pm_suspend() and > dp_pm_resume() are dropped and replace with dp_pm_runtime_suspend() and > dp_pm_runtime_resume() respectively. > > Changes in v7: > -- add comments to dp_pm_runtime_resume() > -- add comments to dp_bridge_hpd_enable() > -- delete dp->hpd_state = ST_DISCONNECTED from dp_bridge_hpd_notify() > > Changes in v6: > -- delete dp_power_client_deinit(dp->power); > -- remove if (!dp->dp_display.is_edp) condition checkout at plug_handle() > -- remove if (!dp->dp_display.is_edp) condition checkout at unplug_handle() > -- add IRQF_NO_AUTOEN to devm_request_irq() > -- add enable_irq() and disable_irq() to pm_runtime_resume()/suspend() > -- del dp->hpd_state = ST_DISCONNECTED from dp_bridge_hpd_disable() > > Changes in v5: > -- remove pm_runtime_put_autosuspend feature, use pm_runtime_put_sync() > -- squash add pm_runtime_force_suspend()/resume() patch into this patch > > Changes in v4: > -- reworded commit text to explain why pm_framework is required for > edp panel > -- reworded commit text to explain autosuspend is choiced > -- delete EV_POWER_PM_GET and PM_EV_POWER_PUT from changes #3 > -- delete dp_display_pm_get() and dp_display_pm_Put() from changes #3 > -- return value from pm_runtime_resume_and_get() directly > -- check return value of devm_pm_runtime_enable() > -- delete pm_runtime_xxx from dp_display_remove() > -- drop dp_display_host_init() from EV_HPD_INIT_SETUP > -- drop both dp_pm_prepare() and dp_pm_compete() from this change > -- delete ST_SUSPENDED state > -- rewording commit text to add more details regrading the purpose > of this change > > Changes in v3: > -- incorporate removing pm_runtime_xx() from dp_pwer.c to this patch > -- use pm_runtime_resume_and_get() instead of pm_runtime_get() > -- error checking pm_runtime_resume_and_get() return value > -- add EV_POWER_PM_GET and PM_EV_POWER_PUT to handle HPD_GPIO case > -- replace dp_pm_suspend() with pm_runtime_force_suspend() > -- replace dp_pm_resume() with pm_runtime_force_resume() > > Signed-off-by: Kuogee Hsieh <quic_khsieh@quicinc.com> Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org> > --- > drivers/gpu/drm/msm/dp/dp_aux.c | 5 + > drivers/gpu/drm/msm/dp/dp_display.c | 177 ++++++++++++++---------------------- > drivers/gpu/drm/msm/dp/dp_power.c | 16 ---- > drivers/gpu/drm/msm/dp/dp_power.h | 11 --- > 4 files changed, 72 insertions(+), 137 deletions(-)
On 07/10/2023 01:55, Kuogee Hsieh wrote: > Currently DP driver is executed independent of PM runtime framework. > This leads msm eDP panel can not being detected by edp_panel driver > during generic_edp_panel_probe() due to AUX DPCD read failed at > edp panel driver. Incorporate PM runtime framework into DP driver so > that host controller's power and clocks are enable/disable through > PM runtime mechanism. Once PM runtime framework is incorporated into > DP driver, waking up device from power up path is not necessary. Hence > remove it. > > After incorporating pm_runtime framework into eDP/DP driver, > dp_pm_suspend() to handle power off both DP phy and controller during > suspend and dp_pm_resume() to handle power on both DP phy and controller > during resume are not necessary. Therefore both dp_pm_suspend() and > dp_pm_resume() are dropped and replace with dp_pm_runtime_suspend() and > dp_pm_runtime_resume() respectively. > > Changes in v7: > -- add comments to dp_pm_runtime_resume() > -- add comments to dp_bridge_hpd_enable() > -- delete dp->hpd_state = ST_DISCONNECTED from dp_bridge_hpd_notify() > > Changes in v6: > -- delete dp_power_client_deinit(dp->power); > -- remove if (!dp->dp_display.is_edp) condition checkout at plug_handle() > -- remove if (!dp->dp_display.is_edp) condition checkout at unplug_handle() > -- add IRQF_NO_AUTOEN to devm_request_irq() > -- add enable_irq() and disable_irq() to pm_runtime_resume()/suspend() > -- del dp->hpd_state = ST_DISCONNECTED from dp_bridge_hpd_disable() > > Changes in v5: > -- remove pm_runtime_put_autosuspend feature, use pm_runtime_put_sync() > -- squash add pm_runtime_force_suspend()/resume() patch into this patch > > Changes in v4: > -- reworded commit text to explain why pm_framework is required for > edp panel > -- reworded commit text to explain autosuspend is choiced > -- delete EV_POWER_PM_GET and PM_EV_POWER_PUT from changes #3 > -- delete dp_display_pm_get() and dp_display_pm_Put() from changes #3 > -- return value from pm_runtime_resume_and_get() directly > -- check return value of devm_pm_runtime_enable() > -- delete pm_runtime_xxx from dp_display_remove() > -- drop dp_display_host_init() from EV_HPD_INIT_SETUP > -- drop both dp_pm_prepare() and dp_pm_compete() from this change > -- delete ST_SUSPENDED state > -- rewording commit text to add more details regrading the purpose > of this change > > Changes in v3: > -- incorporate removing pm_runtime_xx() from dp_pwer.c to this patch > -- use pm_runtime_resume_and_get() instead of pm_runtime_get() > -- error checking pm_runtime_resume_and_get() return value > -- add EV_POWER_PM_GET and PM_EV_POWER_PUT to handle HPD_GPIO case > -- replace dp_pm_suspend() with pm_runtime_force_suspend() > -- replace dp_pm_resume() with pm_runtime_force_resume() > > Signed-off-by: Kuogee Hsieh <quic_khsieh@quicinc.com> > --- > drivers/gpu/drm/msm/dp/dp_aux.c | 5 + > drivers/gpu/drm/msm/dp/dp_display.c | 177 ++++++++++++++---------------------- > drivers/gpu/drm/msm/dp/dp_power.c | 16 ---- > drivers/gpu/drm/msm/dp/dp_power.h | 11 --- > 4 files changed, 72 insertions(+), 137 deletions(-) > > diff --git a/drivers/gpu/drm/msm/dp/dp_aux.c b/drivers/gpu/drm/msm/dp/dp_aux.c > index 8e3b677..10b6eeb 100644 > --- a/drivers/gpu/drm/msm/dp/dp_aux.c > +++ b/drivers/gpu/drm/msm/dp/dp_aux.c > @@ -291,6 +291,10 @@ static ssize_t dp_aux_transfer(struct drm_dp_aux *dp_aux, > return -EINVAL; > } > > + ret = pm_runtime_resume_and_get(dp_aux->dev); > + if (ret) > + return ret; > + > mutex_lock(&aux->mutex); > if (!aux->initted) { > ret = -EIO; > @@ -364,6 +368,7 @@ static ssize_t dp_aux_transfer(struct drm_dp_aux *dp_aux, > > exit: > mutex_unlock(&aux->mutex); > + pm_runtime_put_sync(dp_aux->dev); > > return ret; > } > diff --git a/drivers/gpu/drm/msm/dp/dp_display.c b/drivers/gpu/drm/msm/dp/dp_display.c > index 89fad67..acda544 100644 > --- a/drivers/gpu/drm/msm/dp/dp_display.c > +++ b/drivers/gpu/drm/msm/dp/dp_display.c > @@ -49,7 +49,6 @@ enum { > ST_CONNECTED, > ST_DISCONNECT_PENDING, > ST_DISPLAY_OFF, > - ST_SUSPENDED, > }; > > enum { > @@ -310,10 +309,6 @@ static void dp_display_unbind(struct device *dev, struct device *master, > struct dp_display_private *dp = dev_get_dp_display_private(dev); > struct msm_drm_private *priv = dev_get_drvdata(master); > > - /* disable all HPD interrupts */ > - if (dp->core_initialized) > - dp_catalog_hpd_config_intr(dp->catalog, DP_DP_HPD_INT_MASK, false); > - > kthread_stop(dp->ev_tsk); > > of_dp_aux_depopulate_bus(dp->aux); > @@ -558,7 +553,7 @@ static int dp_hpd_plug_handle(struct dp_display_private *dp, u32 data) > drm_dbg_dp(dp->drm_dev, "Before, type=%d hpd_state=%d\n", > dp->dp_display.connector_type, state); > > - if (state == ST_DISPLAY_OFF || state == ST_SUSPENDED) { > + if (state == ST_DISPLAY_OFF) { > mutex_unlock(&dp->event_mutex); > return 0; > } > @@ -575,6 +570,12 @@ static int dp_hpd_plug_handle(struct dp_display_private *dp, u32 data) > return 0; > } > > + ret = pm_runtime_resume_and_get(&dp->pdev->dev); > + if (ret) { > + DRM_ERROR("failed to pm_runtime_resume\n"); > + return ret; > + } > + > ret = dp_display_usbpd_configure_cb(&dp->pdev->dev); > if (ret) { /* link train failed */ > dp->hpd_state = ST_DISCONNECTED; > @@ -657,6 +658,7 @@ static int dp_hpd_unplug_handle(struct dp_display_private *dp, u32 data) > dp->dp_display.connector_type, state); > > /* uevent will complete disconnection part */ > + pm_runtime_put_sync(&dp->pdev->dev); > mutex_unlock(&dp->event_mutex); > return 0; > } > @@ -672,7 +674,7 @@ static int dp_irq_hpd_handle(struct dp_display_private *dp, u32 data) > drm_dbg_dp(dp->drm_dev, "Before, type=%d hpd_state=%d\n", > dp->dp_display.connector_type, state); > > - if (state == ST_DISPLAY_OFF || state == ST_SUSPENDED) { > + if (state == ST_DISPLAY_OFF) { > mutex_unlock(&dp->event_mutex); > return 0; > } > @@ -1085,7 +1087,6 @@ static int hpd_event_thread(void *data) > > switch (todo->event_id) { > case EV_HPD_INIT_SETUP: > - dp_display_host_init(dp_priv); > break; > case EV_HPD_PLUG_INT: > dp_hpd_plug_handle(dp_priv, todo->data); > @@ -1177,7 +1178,9 @@ static int dp_display_request_irq(struct dp_display_private *dp) > } > > rc = devm_request_irq(dev, dp->irq, dp_display_irq_handler, > - IRQF_TRIGGER_HIGH, "dp_display_isr", dp); > + IRQF_TRIGGER_HIGH|IRQF_NO_AUTOEN, > + "dp_display_isr", dp); > + > if (rc < 0) { > DRM_ERROR("failed to request IRQ%u: %d\n", > dp->irq, rc); > @@ -1263,6 +1266,10 @@ static int dp_display_probe(struct platform_device *pdev) > > platform_set_drvdata(pdev, &dp->dp_display); > > + rc = devm_pm_runtime_enable(&pdev->dev); > + if (rc) > + goto err; > + > rc = dp_display_request_irq(dp); > if (rc) > goto err; > @@ -1285,7 +1292,6 @@ static int dp_display_remove(struct platform_device *pdev) > struct dp_display_private *dp = dev_get_dp_display_private(&pdev->dev); > > component_del(&pdev->dev, &dp_display_comp_ops); > - dp_power_client_deinit(dp->power); > dp_display_deinit_sub_modules(dp); > > platform_set_drvdata(pdev, NULL); > @@ -1293,109 +1299,47 @@ static int dp_display_remove(struct platform_device *pdev) > return 0; > } > > -static int dp_pm_resume(struct device *dev) > +static int dp_pm_runtime_suspend(struct device *dev) > { > - struct platform_device *pdev = to_platform_device(dev); > - struct msm_dp *dp_display = platform_get_drvdata(pdev); > - struct dp_display_private *dp; > - int sink_count = 0; > - > - dp = container_of(dp_display, struct dp_display_private, dp_display); > - > - mutex_lock(&dp->event_mutex); > - > - drm_dbg_dp(dp->drm_dev, > - "Before, type=%d core_inited=%d phy_inited=%d power_on=%d\n", > - dp->dp_display.connector_type, dp->core_initialized, > - dp->phy_initialized, dp_display->power_on); > - > - /* start from disconnected state */ > - dp->hpd_state = ST_DISCONNECTED; > - > - /* turn on dp ctrl/phy */ > - dp_display_host_init(dp); > - > - if (dp_display->is_edp) > - dp_catalog_ctrl_hpd_enable(dp->catalog); > + struct dp_display_private *dp = dev_get_dp_display_private(dev); > > - if (dp_catalog_link_is_connected(dp->catalog)) { > - /* > - * set sink to normal operation mode -- D0 > - * before dpcd read > - */ > - dp_display_host_phy_init(dp); > - dp_link_psm_config(dp->link, &dp->panel->link_info, false); > - sink_count = drm_dp_read_sink_count(dp->aux); > - if (sink_count < 0) > - sink_count = 0; > + disable_irq(dp->irq); > > + if (dp->dp_display.is_edp) { > dp_display_host_phy_exit(dp); > + dp_catalog_ctrl_hpd_disable(dp->catalog); > } > - > - dp->link->sink_count = sink_count; > - /* > - * can not declared display is connected unless > - * HDMI cable is plugged in and sink_count of > - * dongle become 1 > - * also only signal audio when disconnected > - */ > - if (dp->link->sink_count) { > - dp->dp_display.link_ready = true; > - } else { > - dp->dp_display.link_ready = false; > - dp_display_handle_plugged_change(dp_display, false); > - } > - > - drm_dbg_dp(dp->drm_dev, > - "After, type=%d sink=%d conn=%d core_init=%d phy_init=%d power=%d\n", > - dp->dp_display.connector_type, dp->link->sink_count, > - dp->dp_display.link_ready, dp->core_initialized, > - dp->phy_initialized, dp_display->power_on); > - > - mutex_unlock(&dp->event_mutex); > + dp_display_host_deinit(dp); > > return 0; > } > > -static int dp_pm_suspend(struct device *dev) > +static int dp_pm_runtime_resume(struct device *dev) > { > - struct platform_device *pdev = to_platform_device(dev); > - struct msm_dp *dp_display = platform_get_drvdata(pdev); > - struct dp_display_private *dp; > - > - dp = container_of(dp_display, struct dp_display_private, dp_display); > - > - mutex_lock(&dp->event_mutex); > - > - drm_dbg_dp(dp->drm_dev, > - "Before, type=%d core_inited=%d phy_inited=%d power_on=%d\n", > - dp->dp_display.connector_type, dp->core_initialized, > - dp->phy_initialized, dp_display->power_on); > - > - /* mainlink enabled */ > - if (dp_power_clk_status(dp->power, DP_CTRL_PM)) > - dp_ctrl_off_link_stream(dp->ctrl); > - > - dp_display_host_phy_exit(dp); > - > - /* host_init will be called at pm_resume */ > - dp_display_host_deinit(dp); > - > - dp->hpd_state = ST_SUSPENDED; > - > - drm_dbg_dp(dp->drm_dev, > - "After, type=%d core_inited=%d phy_inited=%d power_on=%d\n", > - dp->dp_display.connector_type, dp->core_initialized, > - dp->phy_initialized, dp_display->power_on); > + struct dp_display_private *dp = dev_get_dp_display_private(dev); > > - mutex_unlock(&dp->event_mutex); > + /* > + * for eDP, host cotroller, HPD block and PHY are enabled here > + * but with HPD irq disabled > + * > + * for DP, only host controller is enabled here. > + * HPD block is enabled at dp_bridge_hpd_enable() > + * PHY will be enabled at plugin handler later > + */ > + dp_display_host_init(dp); > + if (dp->dp_display.is_edp) { > + dp_catalog_ctrl_hpd_enable(dp->catalog); > + dp_display_host_phy_init(dp); > + } > > + enable_irq(dp->irq); > return 0; > } > > static const struct dev_pm_ops dp_pm_ops = { > - .suspend = dp_pm_suspend, > - .resume = dp_pm_resume, > + SET_RUNTIME_PM_OPS(dp_pm_runtime_suspend, dp_pm_runtime_resume, NULL) > + SET_SYSTEM_SLEEP_PM_OPS(pm_runtime_force_suspend, > + pm_runtime_force_resume) > }; > > static struct platform_driver dp_display_driver = { > @@ -1478,10 +1422,6 @@ static int dp_display_get_next_bridge(struct msm_dp *dp) > aux_bus = of_get_child_by_name(dev->of_node, "aux-bus"); > > if (aux_bus && dp->is_edp) { > - dp_display_host_init(dp_priv); > - dp_catalog_ctrl_hpd_enable(dp_priv->catalog); > - dp_display_host_phy_init(dp_priv); > - > /* > * The code below assumes that the panel will finish probing > * by the time devm_of_dp_aux_populate_ep_devices() returns. > @@ -1583,6 +1523,11 @@ void dp_bridge_atomic_enable(struct drm_bridge *drm_bridge, > dp_hpd_plug_handle(dp_display, 0); > > mutex_lock(&dp_display->event_mutex); > + if (pm_runtime_resume_and_get(&dp_display->pdev->dev)) { > + DRM_ERROR("failed to pm_runtime_resume\n"); > + mutex_unlock(&dp_display->event_mutex); > + return; > + } > > state = dp_display->hpd_state; > if (state != ST_DISPLAY_OFF && state != ST_MAINLINK_READY) { > @@ -1647,10 +1592,9 @@ void dp_bridge_atomic_post_disable(struct drm_bridge *drm_bridge, > mutex_lock(&dp_display->event_mutex); > > state = dp_display->hpd_state; > - if (state != ST_DISCONNECT_PENDING && state != ST_CONNECTED) { > - mutex_unlock(&dp_display->event_mutex); > - return; > - } > + if (state != ST_DISCONNECT_PENDING && state != ST_CONNECTED) > + drm_dbg_dp(dp->drm_dev, "type=%d wrong hpd_state=%d\n", > + dp->connector_type, state); > > dp_display_disable(dp_display); > > @@ -1663,6 +1607,8 @@ void dp_bridge_atomic_post_disable(struct drm_bridge *drm_bridge, > } > > drm_dbg_dp(dp->drm_dev, "type=%d Done\n", dp->connector_type); > + > + pm_runtime_put_sync(&dp_display->pdev->dev); > mutex_unlock(&dp_display->event_mutex); > } > > @@ -1701,7 +1647,21 @@ void dp_bridge_hpd_enable(struct drm_bridge *bridge) > struct msm_dp *dp_display = dp_bridge->dp_display; > struct dp_display_private *dp = container_of(dp_display, struct dp_display_private, dp_display); > > + /* > + * this is for external DP with hpd irq enabled case, > + * step-1: dp_pm_runtime_resume() enable dp host only > + * step-2: enable hdp block and have hpd irq enabled here > + * step-3: waiting for plugin irq while phy is not initialized > + * step-4: DP PHY is initialized at plugin handler before link training > + * > + */ > mutex_lock(&dp->event_mutex); > + if (pm_runtime_resume_and_get(&dp->pdev->dev)) { > + DRM_ERROR("failed to resume power\n"); > + mutex_unlock(&dp->event_mutex); > + return; > + } > + > dp_catalog_ctrl_hpd_enable(dp->catalog); > > /* enable HDP interrupts */ > @@ -1723,6 +1683,8 @@ void dp_bridge_hpd_disable(struct drm_bridge *bridge) > dp_catalog_ctrl_hpd_disable(dp->catalog); > > dp_display->internal_hpd = false; > + > + pm_runtime_put_sync(&dp->pdev->dev); > mutex_unlock(&dp->event_mutex); > } > > @@ -1737,11 +1699,6 @@ void dp_bridge_hpd_notify(struct drm_bridge *bridge, > if (dp_display->internal_hpd) > return; > > - if (!dp->core_initialized) { > - drm_dbg_dp(dp->drm_dev, "not initialized\n"); > - return; > - } > - > if (!dp_display->link_ready && status == connector_status_connected) > dp_add_event(dp, EV_HPD_PLUG_INT, 0, 0); > else if (dp_display->link_ready && status == connector_status_disconnected) > diff --git a/drivers/gpu/drm/msm/dp/dp_power.c b/drivers/gpu/drm/msm/dp/dp_power.c > index 5cb84ca..863c766 100644 > --- a/drivers/gpu/drm/msm/dp/dp_power.c > +++ b/drivers/gpu/drm/msm/dp/dp_power.c > @@ -152,20 +152,9 @@ int dp_power_client_init(struct dp_power *dp_power) > > power = container_of(dp_power, struct dp_power_private, dp_power); > > - pm_runtime_enable(power->dev); > - > return dp_power_clk_init(power); > } > > -void dp_power_client_deinit(struct dp_power *dp_power) > -{ > - struct dp_power_private *power; > - > - power = container_of(dp_power, struct dp_power_private, dp_power); > - > - pm_runtime_disable(power->dev); > -} > - > int dp_power_init(struct dp_power *dp_power) > { > int rc = 0; > @@ -173,11 +162,7 @@ int dp_power_init(struct dp_power *dp_power) > > power = container_of(dp_power, struct dp_power_private, dp_power); > > - pm_runtime_get_sync(power->dev); With W=1 I'm getting the following warnings: drivers/gpu/drm/msm/dp/dp_power.c: In function ‘dp_power_init’: drivers/gpu/drm/msm/dp/dp_power.c:161:34: warning: variable ‘power’ set but not used [-Wunused-but-set-variable] > - > rc = dp_power_clk_enable(dp_power, DP_CORE_PM, true); > - if (rc) > - pm_runtime_put_sync(power->dev); > > return rc; > } > @@ -189,7 +174,6 @@ int dp_power_deinit(struct dp_power *dp_power) > power = container_of(dp_power, struct dp_power_private, dp_power); > > dp_power_clk_enable(dp_power, DP_CORE_PM, false); > - pm_runtime_put_sync(power->dev); drivers/gpu/drm/msm/dp/dp_power.c: In function ‘dp_power_deinit’: drivers/gpu/drm/msm/dp/dp_power.c:172:34: warning: variable ‘power’ set but not used [-Wunused-but-set-variable] > return 0; > } > > diff --git a/drivers/gpu/drm/msm/dp/dp_power.h b/drivers/gpu/drm/msm/dp/dp_power.h > index a3dec20..55ada51 100644 > --- a/drivers/gpu/drm/msm/dp/dp_power.h > +++ b/drivers/gpu/drm/msm/dp/dp_power.h > @@ -81,17 +81,6 @@ int dp_power_clk_enable(struct dp_power *power, enum dp_pm_type pm_type, > int dp_power_client_init(struct dp_power *power); > > /** > - * dp_power_clinet_deinit() - de-initialize clock and regulator modules > - * > - * @power: instance of power module > - * return: 0 for success, error for failure. > - * > - * This API will de-initialize the DisplayPort's clocks and regulator > - * modules. > - */ > -void dp_power_client_deinit(struct dp_power *power); > - > -/** > * dp_power_get() - configure and get the DisplayPort power module data > * > * @parser: instance of parser module
diff --git a/drivers/gpu/drm/msm/dp/dp_aux.c b/drivers/gpu/drm/msm/dp/dp_aux.c index 8e3b677..10b6eeb 100644 --- a/drivers/gpu/drm/msm/dp/dp_aux.c +++ b/drivers/gpu/drm/msm/dp/dp_aux.c @@ -291,6 +291,10 @@ static ssize_t dp_aux_transfer(struct drm_dp_aux *dp_aux, return -EINVAL; } + ret = pm_runtime_resume_and_get(dp_aux->dev); + if (ret) + return ret; + mutex_lock(&aux->mutex); if (!aux->initted) { ret = -EIO; @@ -364,6 +368,7 @@ static ssize_t dp_aux_transfer(struct drm_dp_aux *dp_aux, exit: mutex_unlock(&aux->mutex); + pm_runtime_put_sync(dp_aux->dev); return ret; } diff --git a/drivers/gpu/drm/msm/dp/dp_display.c b/drivers/gpu/drm/msm/dp/dp_display.c index 89fad67..acda544 100644 --- a/drivers/gpu/drm/msm/dp/dp_display.c +++ b/drivers/gpu/drm/msm/dp/dp_display.c @@ -49,7 +49,6 @@ enum { ST_CONNECTED, ST_DISCONNECT_PENDING, ST_DISPLAY_OFF, - ST_SUSPENDED, }; enum { @@ -310,10 +309,6 @@ static void dp_display_unbind(struct device *dev, struct device *master, struct dp_display_private *dp = dev_get_dp_display_private(dev); struct msm_drm_private *priv = dev_get_drvdata(master); - /* disable all HPD interrupts */ - if (dp->core_initialized) - dp_catalog_hpd_config_intr(dp->catalog, DP_DP_HPD_INT_MASK, false); - kthread_stop(dp->ev_tsk); of_dp_aux_depopulate_bus(dp->aux); @@ -558,7 +553,7 @@ static int dp_hpd_plug_handle(struct dp_display_private *dp, u32 data) drm_dbg_dp(dp->drm_dev, "Before, type=%d hpd_state=%d\n", dp->dp_display.connector_type, state); - if (state == ST_DISPLAY_OFF || state == ST_SUSPENDED) { + if (state == ST_DISPLAY_OFF) { mutex_unlock(&dp->event_mutex); return 0; } @@ -575,6 +570,12 @@ static int dp_hpd_plug_handle(struct dp_display_private *dp, u32 data) return 0; } + ret = pm_runtime_resume_and_get(&dp->pdev->dev); + if (ret) { + DRM_ERROR("failed to pm_runtime_resume\n"); + return ret; + } + ret = dp_display_usbpd_configure_cb(&dp->pdev->dev); if (ret) { /* link train failed */ dp->hpd_state = ST_DISCONNECTED; @@ -657,6 +658,7 @@ static int dp_hpd_unplug_handle(struct dp_display_private *dp, u32 data) dp->dp_display.connector_type, state); /* uevent will complete disconnection part */ + pm_runtime_put_sync(&dp->pdev->dev); mutex_unlock(&dp->event_mutex); return 0; } @@ -672,7 +674,7 @@ static int dp_irq_hpd_handle(struct dp_display_private *dp, u32 data) drm_dbg_dp(dp->drm_dev, "Before, type=%d hpd_state=%d\n", dp->dp_display.connector_type, state); - if (state == ST_DISPLAY_OFF || state == ST_SUSPENDED) { + if (state == ST_DISPLAY_OFF) { mutex_unlock(&dp->event_mutex); return 0; } @@ -1085,7 +1087,6 @@ static int hpd_event_thread(void *data) switch (todo->event_id) { case EV_HPD_INIT_SETUP: - dp_display_host_init(dp_priv); break; case EV_HPD_PLUG_INT: dp_hpd_plug_handle(dp_priv, todo->data); @@ -1177,7 +1178,9 @@ static int dp_display_request_irq(struct dp_display_private *dp) } rc = devm_request_irq(dev, dp->irq, dp_display_irq_handler, - IRQF_TRIGGER_HIGH, "dp_display_isr", dp); + IRQF_TRIGGER_HIGH|IRQF_NO_AUTOEN, + "dp_display_isr", dp); + if (rc < 0) { DRM_ERROR("failed to request IRQ%u: %d\n", dp->irq, rc); @@ -1263,6 +1266,10 @@ static int dp_display_probe(struct platform_device *pdev) platform_set_drvdata(pdev, &dp->dp_display); + rc = devm_pm_runtime_enable(&pdev->dev); + if (rc) + goto err; + rc = dp_display_request_irq(dp); if (rc) goto err; @@ -1285,7 +1292,6 @@ static int dp_display_remove(struct platform_device *pdev) struct dp_display_private *dp = dev_get_dp_display_private(&pdev->dev); component_del(&pdev->dev, &dp_display_comp_ops); - dp_power_client_deinit(dp->power); dp_display_deinit_sub_modules(dp); platform_set_drvdata(pdev, NULL); @@ -1293,109 +1299,47 @@ static int dp_display_remove(struct platform_device *pdev) return 0; } -static int dp_pm_resume(struct device *dev) +static int dp_pm_runtime_suspend(struct device *dev) { - struct platform_device *pdev = to_platform_device(dev); - struct msm_dp *dp_display = platform_get_drvdata(pdev); - struct dp_display_private *dp; - int sink_count = 0; - - dp = container_of(dp_display, struct dp_display_private, dp_display); - - mutex_lock(&dp->event_mutex); - - drm_dbg_dp(dp->drm_dev, - "Before, type=%d core_inited=%d phy_inited=%d power_on=%d\n", - dp->dp_display.connector_type, dp->core_initialized, - dp->phy_initialized, dp_display->power_on); - - /* start from disconnected state */ - dp->hpd_state = ST_DISCONNECTED; - - /* turn on dp ctrl/phy */ - dp_display_host_init(dp); - - if (dp_display->is_edp) - dp_catalog_ctrl_hpd_enable(dp->catalog); + struct dp_display_private *dp = dev_get_dp_display_private(dev); - if (dp_catalog_link_is_connected(dp->catalog)) { - /* - * set sink to normal operation mode -- D0 - * before dpcd read - */ - dp_display_host_phy_init(dp); - dp_link_psm_config(dp->link, &dp->panel->link_info, false); - sink_count = drm_dp_read_sink_count(dp->aux); - if (sink_count < 0) - sink_count = 0; + disable_irq(dp->irq); + if (dp->dp_display.is_edp) { dp_display_host_phy_exit(dp); + dp_catalog_ctrl_hpd_disable(dp->catalog); } - - dp->link->sink_count = sink_count; - /* - * can not declared display is connected unless - * HDMI cable is plugged in and sink_count of - * dongle become 1 - * also only signal audio when disconnected - */ - if (dp->link->sink_count) { - dp->dp_display.link_ready = true; - } else { - dp->dp_display.link_ready = false; - dp_display_handle_plugged_change(dp_display, false); - } - - drm_dbg_dp(dp->drm_dev, - "After, type=%d sink=%d conn=%d core_init=%d phy_init=%d power=%d\n", - dp->dp_display.connector_type, dp->link->sink_count, - dp->dp_display.link_ready, dp->core_initialized, - dp->phy_initialized, dp_display->power_on); - - mutex_unlock(&dp->event_mutex); + dp_display_host_deinit(dp); return 0; } -static int dp_pm_suspend(struct device *dev) +static int dp_pm_runtime_resume(struct device *dev) { - struct platform_device *pdev = to_platform_device(dev); - struct msm_dp *dp_display = platform_get_drvdata(pdev); - struct dp_display_private *dp; - - dp = container_of(dp_display, struct dp_display_private, dp_display); - - mutex_lock(&dp->event_mutex); - - drm_dbg_dp(dp->drm_dev, - "Before, type=%d core_inited=%d phy_inited=%d power_on=%d\n", - dp->dp_display.connector_type, dp->core_initialized, - dp->phy_initialized, dp_display->power_on); - - /* mainlink enabled */ - if (dp_power_clk_status(dp->power, DP_CTRL_PM)) - dp_ctrl_off_link_stream(dp->ctrl); - - dp_display_host_phy_exit(dp); - - /* host_init will be called at pm_resume */ - dp_display_host_deinit(dp); - - dp->hpd_state = ST_SUSPENDED; - - drm_dbg_dp(dp->drm_dev, - "After, type=%d core_inited=%d phy_inited=%d power_on=%d\n", - dp->dp_display.connector_type, dp->core_initialized, - dp->phy_initialized, dp_display->power_on); + struct dp_display_private *dp = dev_get_dp_display_private(dev); - mutex_unlock(&dp->event_mutex); + /* + * for eDP, host cotroller, HPD block and PHY are enabled here + * but with HPD irq disabled + * + * for DP, only host controller is enabled here. + * HPD block is enabled at dp_bridge_hpd_enable() + * PHY will be enabled at plugin handler later + */ + dp_display_host_init(dp); + if (dp->dp_display.is_edp) { + dp_catalog_ctrl_hpd_enable(dp->catalog); + dp_display_host_phy_init(dp); + } + enable_irq(dp->irq); return 0; } static const struct dev_pm_ops dp_pm_ops = { - .suspend = dp_pm_suspend, - .resume = dp_pm_resume, + SET_RUNTIME_PM_OPS(dp_pm_runtime_suspend, dp_pm_runtime_resume, NULL) + SET_SYSTEM_SLEEP_PM_OPS(pm_runtime_force_suspend, + pm_runtime_force_resume) }; static struct platform_driver dp_display_driver = { @@ -1478,10 +1422,6 @@ static int dp_display_get_next_bridge(struct msm_dp *dp) aux_bus = of_get_child_by_name(dev->of_node, "aux-bus"); if (aux_bus && dp->is_edp) { - dp_display_host_init(dp_priv); - dp_catalog_ctrl_hpd_enable(dp_priv->catalog); - dp_display_host_phy_init(dp_priv); - /* * The code below assumes that the panel will finish probing * by the time devm_of_dp_aux_populate_ep_devices() returns. @@ -1583,6 +1523,11 @@ void dp_bridge_atomic_enable(struct drm_bridge *drm_bridge, dp_hpd_plug_handle(dp_display, 0); mutex_lock(&dp_display->event_mutex); + if (pm_runtime_resume_and_get(&dp_display->pdev->dev)) { + DRM_ERROR("failed to pm_runtime_resume\n"); + mutex_unlock(&dp_display->event_mutex); + return; + } state = dp_display->hpd_state; if (state != ST_DISPLAY_OFF && state != ST_MAINLINK_READY) { @@ -1647,10 +1592,9 @@ void dp_bridge_atomic_post_disable(struct drm_bridge *drm_bridge, mutex_lock(&dp_display->event_mutex); state = dp_display->hpd_state; - if (state != ST_DISCONNECT_PENDING && state != ST_CONNECTED) { - mutex_unlock(&dp_display->event_mutex); - return; - } + if (state != ST_DISCONNECT_PENDING && state != ST_CONNECTED) + drm_dbg_dp(dp->drm_dev, "type=%d wrong hpd_state=%d\n", + dp->connector_type, state); dp_display_disable(dp_display); @@ -1663,6 +1607,8 @@ void dp_bridge_atomic_post_disable(struct drm_bridge *drm_bridge, } drm_dbg_dp(dp->drm_dev, "type=%d Done\n", dp->connector_type); + + pm_runtime_put_sync(&dp_display->pdev->dev); mutex_unlock(&dp_display->event_mutex); } @@ -1701,7 +1647,21 @@ void dp_bridge_hpd_enable(struct drm_bridge *bridge) struct msm_dp *dp_display = dp_bridge->dp_display; struct dp_display_private *dp = container_of(dp_display, struct dp_display_private, dp_display); + /* + * this is for external DP with hpd irq enabled case, + * step-1: dp_pm_runtime_resume() enable dp host only + * step-2: enable hdp block and have hpd irq enabled here + * step-3: waiting for plugin irq while phy is not initialized + * step-4: DP PHY is initialized at plugin handler before link training + * + */ mutex_lock(&dp->event_mutex); + if (pm_runtime_resume_and_get(&dp->pdev->dev)) { + DRM_ERROR("failed to resume power\n"); + mutex_unlock(&dp->event_mutex); + return; + } + dp_catalog_ctrl_hpd_enable(dp->catalog); /* enable HDP interrupts */ @@ -1723,6 +1683,8 @@ void dp_bridge_hpd_disable(struct drm_bridge *bridge) dp_catalog_ctrl_hpd_disable(dp->catalog); dp_display->internal_hpd = false; + + pm_runtime_put_sync(&dp->pdev->dev); mutex_unlock(&dp->event_mutex); } @@ -1737,11 +1699,6 @@ void dp_bridge_hpd_notify(struct drm_bridge *bridge, if (dp_display->internal_hpd) return; - if (!dp->core_initialized) { - drm_dbg_dp(dp->drm_dev, "not initialized\n"); - return; - } - if (!dp_display->link_ready && status == connector_status_connected) dp_add_event(dp, EV_HPD_PLUG_INT, 0, 0); else if (dp_display->link_ready && status == connector_status_disconnected) diff --git a/drivers/gpu/drm/msm/dp/dp_power.c b/drivers/gpu/drm/msm/dp/dp_power.c index 5cb84ca..863c766 100644 --- a/drivers/gpu/drm/msm/dp/dp_power.c +++ b/drivers/gpu/drm/msm/dp/dp_power.c @@ -152,20 +152,9 @@ int dp_power_client_init(struct dp_power *dp_power) power = container_of(dp_power, struct dp_power_private, dp_power); - pm_runtime_enable(power->dev); - return dp_power_clk_init(power); } -void dp_power_client_deinit(struct dp_power *dp_power) -{ - struct dp_power_private *power; - - power = container_of(dp_power, struct dp_power_private, dp_power); - - pm_runtime_disable(power->dev); -} - int dp_power_init(struct dp_power *dp_power) { int rc = 0; @@ -173,11 +162,7 @@ int dp_power_init(struct dp_power *dp_power) power = container_of(dp_power, struct dp_power_private, dp_power); - pm_runtime_get_sync(power->dev); - rc = dp_power_clk_enable(dp_power, DP_CORE_PM, true); - if (rc) - pm_runtime_put_sync(power->dev); return rc; } @@ -189,7 +174,6 @@ int dp_power_deinit(struct dp_power *dp_power) power = container_of(dp_power, struct dp_power_private, dp_power); dp_power_clk_enable(dp_power, DP_CORE_PM, false); - pm_runtime_put_sync(power->dev); return 0; } diff --git a/drivers/gpu/drm/msm/dp/dp_power.h b/drivers/gpu/drm/msm/dp/dp_power.h index a3dec20..55ada51 100644 --- a/drivers/gpu/drm/msm/dp/dp_power.h +++ b/drivers/gpu/drm/msm/dp/dp_power.h @@ -81,17 +81,6 @@ int dp_power_clk_enable(struct dp_power *power, enum dp_pm_type pm_type, int dp_power_client_init(struct dp_power *power); /** - * dp_power_clinet_deinit() - de-initialize clock and regulator modules - * - * @power: instance of power module - * return: 0 for success, error for failure. - * - * This API will de-initialize the DisplayPort's clocks and regulator - * modules. - */ -void dp_power_client_deinit(struct dp_power *power); - -/** * dp_power_get() - configure and get the DisplayPort power module data * * @parser: instance of parser module
Currently DP driver is executed independent of PM runtime framework. This leads msm eDP panel can not being detected by edp_panel driver during generic_edp_panel_probe() due to AUX DPCD read failed at edp panel driver. Incorporate PM runtime framework into DP driver so that host controller's power and clocks are enable/disable through PM runtime mechanism. Once PM runtime framework is incorporated into DP driver, waking up device from power up path is not necessary. Hence remove it. After incorporating pm_runtime framework into eDP/DP driver, dp_pm_suspend() to handle power off both DP phy and controller during suspend and dp_pm_resume() to handle power on both DP phy and controller during resume are not necessary. Therefore both dp_pm_suspend() and dp_pm_resume() are dropped and replace with dp_pm_runtime_suspend() and dp_pm_runtime_resume() respectively. Changes in v7: -- add comments to dp_pm_runtime_resume() -- add comments to dp_bridge_hpd_enable() -- delete dp->hpd_state = ST_DISCONNECTED from dp_bridge_hpd_notify() Changes in v6: -- delete dp_power_client_deinit(dp->power); -- remove if (!dp->dp_display.is_edp) condition checkout at plug_handle() -- remove if (!dp->dp_display.is_edp) condition checkout at unplug_handle() -- add IRQF_NO_AUTOEN to devm_request_irq() -- add enable_irq() and disable_irq() to pm_runtime_resume()/suspend() -- del dp->hpd_state = ST_DISCONNECTED from dp_bridge_hpd_disable() Changes in v5: -- remove pm_runtime_put_autosuspend feature, use pm_runtime_put_sync() -- squash add pm_runtime_force_suspend()/resume() patch into this patch Changes in v4: -- reworded commit text to explain why pm_framework is required for edp panel -- reworded commit text to explain autosuspend is choiced -- delete EV_POWER_PM_GET and PM_EV_POWER_PUT from changes #3 -- delete dp_display_pm_get() and dp_display_pm_Put() from changes #3 -- return value from pm_runtime_resume_and_get() directly -- check return value of devm_pm_runtime_enable() -- delete pm_runtime_xxx from dp_display_remove() -- drop dp_display_host_init() from EV_HPD_INIT_SETUP -- drop both dp_pm_prepare() and dp_pm_compete() from this change -- delete ST_SUSPENDED state -- rewording commit text to add more details regrading the purpose of this change Changes in v3: -- incorporate removing pm_runtime_xx() from dp_pwer.c to this patch -- use pm_runtime_resume_and_get() instead of pm_runtime_get() -- error checking pm_runtime_resume_and_get() return value -- add EV_POWER_PM_GET and PM_EV_POWER_PUT to handle HPD_GPIO case -- replace dp_pm_suspend() with pm_runtime_force_suspend() -- replace dp_pm_resume() with pm_runtime_force_resume() Signed-off-by: Kuogee Hsieh <quic_khsieh@quicinc.com> --- drivers/gpu/drm/msm/dp/dp_aux.c | 5 + drivers/gpu/drm/msm/dp/dp_display.c | 177 ++++++++++++++---------------------- drivers/gpu/drm/msm/dp/dp_power.c | 16 ---- drivers/gpu/drm/msm/dp/dp_power.h | 11 --- 4 files changed, 72 insertions(+), 137 deletions(-)