From patchwork Fri Dec 1 05:03:11 2023 Content-Type: text/plain; charset="utf-8" MIME-Version: 1.0 Content-Transfer-Encoding: 7bit X-Patchwork-Submitter: Can Guo X-Patchwork-Id: 749067 Authentication-Results: smtp.subspace.kernel.org; dkim=pass (2048-bit key) header.d=quicinc.com header.i=@quicinc.com header.b="aPMaxlEQ" Received: from mx0b-0031df01.pphosted.com (mx0b-0031df01.pphosted.com [205.220.180.131]) by lindbergh.monkeyblade.net (Postfix) with ESMTPS id DE4FD1BCA; Thu, 30 Nov 2023 21:04:55 -0800 (PST) Received: from pps.filterd (m0279871.ppops.net [127.0.0.1]) by mx0a-0031df01.pphosted.com (8.17.1.19/8.17.1.19) with ESMTP id 3B12c829023318; Fri, 1 Dec 2023 05:04:01 GMT DKIM-Signature: v=1; a=rsa-sha256; c=relaxed/relaxed; d=quicinc.com; h=from : to : cc : subject : date : message-id : in-reply-to : references; s=qcppdkim1; bh=CvdWa6K9CXgXFHOytyGULvAoyyhKGAcpMZLQsXKRMdo=; b=aPMaxlEQqs3m0TPEI0wzkr0cE36m22vATKLNcLnrFkgwuJnPajIOauQQSNveFpWiEsjg w04BhfvElVHnancZ43epmg3bpOlGYM4prmp31OLS1FpYPY6Uxg7ua9dXip4h0NHL7fuT +IpLNKXLIET2E8/QoFSyvy2RkFFOYoZpYWuYefbEFLdTPWOEIry9pNEl+3U6QqizVbBI V9G2K1gWmGc9jVyjTqBs1R6VwmK9eVy0qYeYU3j7kAkTbeuRvfb3Q92eRDQSujmmZYov wIFVln17TButXIFe4UIWLnQEKVFAqMpHSXtI6JmN2LijrzMUTxD0ePegzq7nfL3OrB0m fA== Received: from nasanppmta03.qualcomm.com (i-global254.qualcomm.com [199.106.103.254]) by mx0a-0031df01.pphosted.com (PPS) with ESMTPS id 3upw12sryq-1 (version=TLSv1.2 cipher=ECDHE-RSA-AES256-GCM-SHA384 bits=256 verify=NOT); Fri, 01 Dec 2023 05:04:00 +0000 Received: from pps.filterd (NASANPPMTA03.qualcomm.com [127.0.0.1]) by NASANPPMTA03.qualcomm.com (8.17.1.5/8.17.1.5) with ESMTP id 3B153xmG019602; Fri, 1 Dec 2023 05:03:59 GMT Received: from pps.reinject (localhost [127.0.0.1]) by NASANPPMTA03.qualcomm.com (PPS) with ESMTP id 3unmevu328-1; Fri, 01 Dec 2023 05:03:59 +0000 Received: from NASANPPMTA03.qualcomm.com (NASANPPMTA03.qualcomm.com [127.0.0.1]) by pps.reinject (8.17.1.5/8.17.1.5) with ESMTP id 3B14uwUB008275; Fri, 1 Dec 2023 05:03:58 GMT Received: from stor-dylan.qualcomm.com (stor-dylan.qualcomm.com [192.168.140.207]) by NASANPPMTA03.qualcomm.com (PPS) with ESMTP id 3B153wJm019591; Fri, 01 Dec 2023 05:03:58 +0000 Received: by stor-dylan.qualcomm.com (Postfix, from userid 359480) id 4DD0620A69; Thu, 30 Nov 2023 21:03:58 -0800 (PST) From: Can Guo To: quic_cang@quicinc.com, bvanassche@acm.org, mani@kernel.org, adrian.hunter@intel.com, vkoul@kernel.org, beanhuo@micron.com, avri.altman@wdc.com, junwoo80.lee@samsung.com, martin.petersen@oracle.com Cc: linux-scsi@vger.kernel.org, linux-arm-msm@vger.kernel.org, Alim Akhtar , "James E.J. Bottomley" , Krzysztof Kozlowski , Peter Wang , Stanley Jhu , Andy Gross , Bjorn Andersson , Konrad Dybcio , Matthias Brugger , AngeloGioacchino Del Regno , Nitin Rawat , =?utf-8?q?Uwe_Kleine-K=C3=B6nig?= , Brian Masney , Andrew Halaney , linux-arm-kernel@lists.infradead.org (moderated list:ARM/SAMSUNG S3C, S5P AND EXYNOS ARM ARCHITECTURES), linux-samsung-soc@vger.kernel.org (open list:ARM/SAMSUNG S3C, S5P AND EXYNOS ARM ARCHITECTURES), linux-kernel@vger.kernel.org (open list), linux-mediatek@lists.infradead.org (moderated list:UNIVERSAL FLASH STORAGE HOST CONTROLLER DRIVER...) Subject: [PATCH v7 01/10] scsi: ufs: host: Rename structure ufs_dev_params to ufs_host_params Date: Thu, 30 Nov 2023 21:03:11 -0800 Message-Id: <1701407001-471-2-git-send-email-quic_cang@quicinc.com> X-Mailer: git-send-email 2.7.4 In-Reply-To: <1701407001-471-1-git-send-email-quic_cang@quicinc.com> References: <1701407001-471-1-git-send-email-quic_cang@quicinc.com> X-QCInternal: smtphost X-QCInternal: smtphost X-Proofpoint-Virus-Version: vendor=nai engine=6200 definitions=5800 signatures=585085 X-Proofpoint-Virus-Version: vendor=nai engine=6200 definitions=5800 signatures=585085 X-Proofpoint-GUID: uj9rYIL6lamWVDOe7shh304rugDA5qxm X-Proofpoint-ORIG-GUID: uj9rYIL6lamWVDOe7shh304rugDA5qxm X-Proofpoint-Virus-Version: vendor=baseguard engine=ICAP:2.0.272,Aquarius:18.0.997,Hydra:6.0.619,FMLib:17.11.176.26 definitions=2023-12-01_02,2023-11-30_01,2023-05-22_02 X-Proofpoint-Spam-Details: rule=outbound_notspam policy=outbound score=0 mlxscore=0 bulkscore=0 malwarescore=0 suspectscore=0 mlxlogscore=999 phishscore=0 priorityscore=1501 spamscore=0 impostorscore=0 adultscore=0 lowpriorityscore=0 clxscore=1011 classifier=spam adjust=0 reason=mlx scancount=1 engine=8.12.0-2311060000 definitions=main-2312010028 Precedence: bulk X-Mailing-List: linux-arm-msm@vger.kernel.org List-Id: List-Subscribe: List-Unsubscribe: Structure ufs_dev_params is actually used in UFS host vendor drivers to declare host specific power mode parameters, like ufs__params or host_cap, which makes the code not very straightforward to read. Rename the structure ufs_dev_params to ufs_host_params and unify the declarations in all vendor drivers to host_params. In addition, rename the two functions ufshcd_init_pwr_dev_param() and ufshcd_get_pwr_dev_param() which work based on the ufs_host_params to ufshcd_init_host_params() and ufshcd_negotiate_pwr_params() respectively to avoid confusions. This change does not change any functionalities or logic. Acked-by: Andrew Halaney Reviewed-by: Nitin Rawat Reviewed-by: Manivannan Sadhasivam Reviewed-by: Bart Van Assche Signed-off-by: Can Guo --- drivers/ufs/host/ufs-exynos.c | 7 ++-- drivers/ufs/host/ufs-hisi.c | 11 +++---- drivers/ufs/host/ufs-mediatek.c | 12 +++---- drivers/ufs/host/ufs-qcom.c | 12 +++---- drivers/ufs/host/ufshcd-pltfrm.c | 69 ++++++++++++++++++++-------------------- drivers/ufs/host/ufshcd-pltfrm.h | 10 +++--- 6 files changed, 57 insertions(+), 64 deletions(-) diff --git a/drivers/ufs/host/ufs-exynos.c b/drivers/ufs/host/ufs-exynos.c index 71bd6db..734d40f 100644 --- a/drivers/ufs/host/ufs-exynos.c +++ b/drivers/ufs/host/ufs-exynos.c @@ -765,7 +765,7 @@ static int exynos_ufs_pre_pwr_mode(struct ufs_hba *hba, { struct exynos_ufs *ufs = ufshcd_get_variant(hba); struct phy *generic_phy = ufs->phy; - struct ufs_dev_params ufs_exynos_cap; + struct ufs_host_params host_params; int ret; if (!dev_req_params) { @@ -774,10 +774,9 @@ static int exynos_ufs_pre_pwr_mode(struct ufs_hba *hba, goto out; } - ufshcd_init_pwr_dev_param(&ufs_exynos_cap); + ufshcd_init_host_params(&host_params); - ret = ufshcd_get_pwr_dev_param(&ufs_exynos_cap, - dev_max_params, dev_req_params); + ret = ufshcd_negotiate_pwr_params(&host_params, dev_max_params, dev_req_params); if (ret) { pr_err("%s: failed to determine capabilities\n", __func__); goto out; diff --git a/drivers/ufs/host/ufs-hisi.c b/drivers/ufs/host/ufs-hisi.c index 0229ac0..5ee73ff 100644 --- a/drivers/ufs/host/ufs-hisi.c +++ b/drivers/ufs/host/ufs-hisi.c @@ -293,9 +293,9 @@ static int ufs_hisi_link_startup_notify(struct ufs_hba *hba, return err; } -static void ufs_hisi_set_dev_cap(struct ufs_dev_params *hisi_param) +static void ufs_hisi_set_dev_cap(struct ufs_host_params *host_params) { - ufshcd_init_pwr_dev_param(hisi_param); + ufshcd_init_host_params(host_params); } static void ufs_hisi_pwr_change_pre_change(struct ufs_hba *hba) @@ -365,7 +365,7 @@ static int ufs_hisi_pwr_change_notify(struct ufs_hba *hba, struct ufs_pa_layer_attr *dev_max_params, struct ufs_pa_layer_attr *dev_req_params) { - struct ufs_dev_params ufs_hisi_cap; + struct ufs_host_params host_params; int ret = 0; if (!dev_req_params) { @@ -377,9 +377,8 @@ static int ufs_hisi_pwr_change_notify(struct ufs_hba *hba, switch (status) { case PRE_CHANGE: - ufs_hisi_set_dev_cap(&ufs_hisi_cap); - ret = ufshcd_get_pwr_dev_param(&ufs_hisi_cap, - dev_max_params, dev_req_params); + ufs_hisi_set_dev_cap(&host_params); + ret = ufshcd_negotiate_pwr_params(&host_params, dev_max_params, dev_req_params); if (ret) { dev_err(hba->dev, "%s: failed to determine capabilities\n", __func__); diff --git a/drivers/ufs/host/ufs-mediatek.c b/drivers/ufs/host/ufs-mediatek.c index fc61790..776bca4 100644 --- a/drivers/ufs/host/ufs-mediatek.c +++ b/drivers/ufs/host/ufs-mediatek.c @@ -996,16 +996,14 @@ static int ufs_mtk_pre_pwr_change(struct ufs_hba *hba, struct ufs_pa_layer_attr *dev_req_params) { struct ufs_mtk_host *host = ufshcd_get_variant(hba); - struct ufs_dev_params host_cap; + struct ufs_host_params host_params; int ret; - ufshcd_init_pwr_dev_param(&host_cap); - host_cap.hs_rx_gear = UFS_HS_G5; - host_cap.hs_tx_gear = UFS_HS_G5; + ufshcd_init_host_params(&host_params); + host_params.hs_rx_gear = UFS_HS_G5; + host_params.hs_tx_gear = UFS_HS_G5; - ret = ufshcd_get_pwr_dev_param(&host_cap, - dev_max_params, - dev_req_params); + ret = ufshcd_negotiate_pwr_params(&host_params, dev_max_params, dev_req_params); if (ret) { pr_info("%s: failed to determine capabilities\n", __func__); diff --git a/drivers/ufs/host/ufs-qcom.c b/drivers/ufs/host/ufs-qcom.c index 96cb8b5..197c5a5 100644 --- a/drivers/ufs/host/ufs-qcom.c +++ b/drivers/ufs/host/ufs-qcom.c @@ -898,7 +898,7 @@ static int ufs_qcom_pwr_change_notify(struct ufs_hba *hba, struct ufs_pa_layer_attr *dev_req_params) { struct ufs_qcom_host *host = ufshcd_get_variant(hba); - struct ufs_dev_params ufs_qcom_cap; + struct ufs_host_params host_params; int ret = 0; if (!dev_req_params) { @@ -908,15 +908,13 @@ static int ufs_qcom_pwr_change_notify(struct ufs_hba *hba, switch (status) { case PRE_CHANGE: - ufshcd_init_pwr_dev_param(&ufs_qcom_cap); - ufs_qcom_cap.hs_rate = UFS_QCOM_LIMIT_HS_RATE; + ufshcd_init_host_params(&host_params); + host_params.hs_rate = UFS_QCOM_LIMIT_HS_RATE; /* This driver only supports symmetic gear setting i.e., hs_tx_gear == hs_rx_gear */ - ufs_qcom_cap.hs_tx_gear = ufs_qcom_cap.hs_rx_gear = ufs_qcom_get_hs_gear(hba); + host_params.hs_tx_gear = host_params.hs_rx_gear = ufs_qcom_get_hs_gear(hba); - ret = ufshcd_get_pwr_dev_param(&ufs_qcom_cap, - dev_max_params, - dev_req_params); + ret = ufshcd_negotiate_pwr_params(&host_params, dev_max_params, dev_req_params); if (ret) { dev_err(hba->dev, "%s: failed to determine capabilities\n", __func__); diff --git a/drivers/ufs/host/ufshcd-pltfrm.c b/drivers/ufs/host/ufshcd-pltfrm.c index da2558e..1633edc 100644 --- a/drivers/ufs/host/ufshcd-pltfrm.c +++ b/drivers/ufs/host/ufshcd-pltfrm.c @@ -285,61 +285,60 @@ static int ufshcd_parse_operating_points(struct ufs_hba *hba) } /** - * ufshcd_get_pwr_dev_param - get finally agreed attributes for - * power mode change - * @pltfrm_param: pointer to platform parameters + * ufshcd_negotiate_pwr_params - find power mode settings that are supported by + both the controller and the device + * @host_params: pointer to host parameters * @dev_max: pointer to device attributes * @agreed_pwr: returned agreed attributes * * Return: 0 on success, non-zero value on failure. */ -int ufshcd_get_pwr_dev_param(const struct ufs_dev_params *pltfrm_param, - const struct ufs_pa_layer_attr *dev_max, - struct ufs_pa_layer_attr *agreed_pwr) +int ufshcd_negotiate_pwr_params(const struct ufs_host_params *host_params, + const struct ufs_pa_layer_attr *dev_max, + struct ufs_pa_layer_attr *agreed_pwr) { - int min_pltfrm_gear; + int min_host_gear; int min_dev_gear; bool is_dev_sup_hs = false; - bool is_pltfrm_max_hs = false; + bool is_host_max_hs = false; if (dev_max->pwr_rx == FAST_MODE) is_dev_sup_hs = true; - if (pltfrm_param->desired_working_mode == UFS_HS_MODE) { - is_pltfrm_max_hs = true; - min_pltfrm_gear = min_t(u32, pltfrm_param->hs_rx_gear, - pltfrm_param->hs_tx_gear); + if (host_params->desired_working_mode == UFS_HS_MODE) { + is_host_max_hs = true; + min_host_gear = min_t(u32, host_params->hs_rx_gear, + host_params->hs_tx_gear); } else { - min_pltfrm_gear = min_t(u32, pltfrm_param->pwm_rx_gear, - pltfrm_param->pwm_tx_gear); + min_host_gear = min_t(u32, host_params->pwm_rx_gear, + host_params->pwm_tx_gear); } /* - * device doesn't support HS but - * pltfrm_param->desired_working_mode is HS, - * thus device and pltfrm_param don't agree + * device doesn't support HS but host_params->desired_working_mode is HS, + * thus device and host_params don't agree */ - if (!is_dev_sup_hs && is_pltfrm_max_hs) { + if (!is_dev_sup_hs && is_host_max_hs) { pr_info("%s: device doesn't support HS\n", __func__); return -ENOTSUPP; - } else if (is_dev_sup_hs && is_pltfrm_max_hs) { + } else if (is_dev_sup_hs && is_host_max_hs) { /* * since device supports HS, it supports FAST_MODE. - * since pltfrm_param->desired_working_mode is also HS + * since host_params->desired_working_mode is also HS * then final decision (FAST/FASTAUTO) is done according * to pltfrm_params as it is the restricting factor */ - agreed_pwr->pwr_rx = pltfrm_param->rx_pwr_hs; + agreed_pwr->pwr_rx = host_params->rx_pwr_hs; agreed_pwr->pwr_tx = agreed_pwr->pwr_rx; } else { /* - * here pltfrm_param->desired_working_mode is PWM. + * here host_params->desired_working_mode is PWM. * it doesn't matter whether device supports HS or PWM, - * in both cases pltfrm_param->desired_working_mode will + * in both cases host_params->desired_working_mode will * determine the mode */ - agreed_pwr->pwr_rx = pltfrm_param->rx_pwr_pwm; + agreed_pwr->pwr_rx = host_params->rx_pwr_pwm; agreed_pwr->pwr_tx = agreed_pwr->pwr_rx; } @@ -349,9 +348,9 @@ int ufshcd_get_pwr_dev_param(const struct ufs_dev_params *pltfrm_param, * the same decision will be made for rx */ agreed_pwr->lane_tx = min_t(u32, dev_max->lane_tx, - pltfrm_param->tx_lanes); + host_params->tx_lanes); agreed_pwr->lane_rx = min_t(u32, dev_max->lane_rx, - pltfrm_param->rx_lanes); + host_params->rx_lanes); /* device maximum gear is the minimum between device rx and tx gears */ min_dev_gear = min_t(u32, dev_max->gear_rx, dev_max->gear_tx); @@ -364,26 +363,26 @@ int ufshcd_get_pwr_dev_param(const struct ufs_dev_params *pltfrm_param, * what is the gear, as it is the one that also decided previously what * pwr the device will be configured to. */ - if ((is_dev_sup_hs && is_pltfrm_max_hs) || - (!is_dev_sup_hs && !is_pltfrm_max_hs)) { + if ((is_dev_sup_hs && is_host_max_hs) || + (!is_dev_sup_hs && !is_host_max_hs)) { agreed_pwr->gear_rx = - min_t(u32, min_dev_gear, min_pltfrm_gear); + min_t(u32, min_dev_gear, min_host_gear); } else if (!is_dev_sup_hs) { agreed_pwr->gear_rx = min_dev_gear; } else { - agreed_pwr->gear_rx = min_pltfrm_gear; + agreed_pwr->gear_rx = min_host_gear; } agreed_pwr->gear_tx = agreed_pwr->gear_rx; - agreed_pwr->hs_rate = pltfrm_param->hs_rate; + agreed_pwr->hs_rate = host_params->hs_rate; return 0; } -EXPORT_SYMBOL_GPL(ufshcd_get_pwr_dev_param); +EXPORT_SYMBOL_GPL(ufshcd_negotiate_pwr_params); -void ufshcd_init_pwr_dev_param(struct ufs_dev_params *dev_param) +void ufshcd_init_host_params(struct ufs_host_params *host_params) { - *dev_param = (struct ufs_dev_params){ + *host_params = (struct ufs_host_params){ .tx_lanes = UFS_LANE_2, .rx_lanes = UFS_LANE_2, .hs_rx_gear = UFS_HS_G3, @@ -398,7 +397,7 @@ void ufshcd_init_pwr_dev_param(struct ufs_dev_params *dev_param) .desired_working_mode = UFS_HS_MODE, }; } -EXPORT_SYMBOL_GPL(ufshcd_init_pwr_dev_param); +EXPORT_SYMBOL_GPL(ufshcd_init_host_params); /** * ufshcd_pltfrm_init - probe routine of the driver diff --git a/drivers/ufs/host/ufshcd-pltfrm.h b/drivers/ufs/host/ufshcd-pltfrm.h index a86a3ad..df387be 100644 --- a/drivers/ufs/host/ufshcd-pltfrm.h +++ b/drivers/ufs/host/ufshcd-pltfrm.h @@ -10,7 +10,7 @@ #define UFS_PWM_MODE 1 #define UFS_HS_MODE 2 -struct ufs_dev_params { +struct ufs_host_params { u32 pwm_rx_gear; /* pwm rx gear to work in */ u32 pwm_tx_gear; /* pwm tx gear to work in */ u32 hs_rx_gear; /* hs rx gear to work in */ @@ -25,10 +25,10 @@ struct ufs_dev_params { u32 desired_working_mode; }; -int ufshcd_get_pwr_dev_param(const struct ufs_dev_params *dev_param, - const struct ufs_pa_layer_attr *dev_max, - struct ufs_pa_layer_attr *agreed_pwr); -void ufshcd_init_pwr_dev_param(struct ufs_dev_params *dev_param); +int ufshcd_negotiate_pwr_params(const struct ufs_host_params *host_params, + const struct ufs_pa_layer_attr *dev_max, + struct ufs_pa_layer_attr *agreed_pwr); +void ufshcd_init_host_params(struct ufs_host_params *host_params); int ufshcd_pltfrm_init(struct platform_device *pdev, const struct ufs_hba_variant_ops *vops); int ufshcd_populate_vreg(struct device *dev, const char *name,