diff mbox series

[v4,2/4] arm64: dts: qcom: pm8994: Add PON node

Message ID 20180907061129.10416-3-vkoul@kernel.org
State Accepted
Commit 2f74b3db92bef4f8f246d9301b6382890c5a24d8
Headers show
Series arm64: dts: Add PON & resin binding | expand

Commit Message

Vinod Koul Sept. 7, 2018, 6:11 a.m. UTC 
Add PON and pwrkey as child nodes for PON driver.

Signed-off-by: Vinod Koul <vkoul@kernel.org>

Reviewed-by: Bjorn Andersson <bjorn.andersson@linaro.org>

---
 arch/arm64/boot/dts/qcom/pm8994.dtsi | 18 ++++++++++++++++++
 1 file changed, 18 insertions(+)

-- 
2.14.4
diff mbox series

Patch

diff --git a/arch/arm64/boot/dts/qcom/pm8994.dtsi b/arch/arm64/boot/dts/qcom/pm8994.dtsi
index 80024c0b1c7c..76b5a3e6a2b5 100644
--- a/arch/arm64/boot/dts/qcom/pm8994.dtsi
+++ b/arch/arm64/boot/dts/qcom/pm8994.dtsi
@@ -1,6 +1,7 @@ 
 // SPDX-License-Identifier: GPL-2.0
 #include <dt-bindings/interrupt-controller/irq.h>
 #include <dt-bindings/spmi/spmi.h>
+#include <dt-bindings/input/linux-event-codes.h>
 
 &spmi_bus {
 
@@ -17,6 +18,23 @@ 
 			interrupts = <0x0 0x61 0x1 IRQ_TYPE_EDGE_RISING>;
 		};
 
+		pon@800 {
+			compatible = "qcom,pm8916-pon";
+
+			reg = <0x800>;
+			mode-bootloader = <0x2>;
+			mode-recovery = <0x1>;
+
+			pwrkey {
+				compatible = "qcom,pm8941-pwrkey";
+				interrupts = <0x0 0x8 0 IRQ_TYPE_EDGE_BOTH>;
+				debounce = <15625>;
+				bias-pull-up;
+				linux,code = <KEY_POWER>;
+			};
+
+		};
+
 		pm8994_gpios: gpios@c000 {
 			compatible = "qcom,pm8994-gpio";
 			reg = <0xc000>;