diff mbox series

[06/22] arm64: dts: qcom: pm8150: Add Base DTS file

Message ID 20190814125012.8700-7-vkoul@kernel.org
State New
Headers show
Series arm64: dts: qcom: sm8150: Add SM8150 DTS | expand

Commit Message

Vinod Koul Aug. 14, 2019, 12:49 p.m. UTC
Add base DTS file for pm8150 along with GPIOs

Signed-off-by: Vinod Koul <vkoul@kernel.org>

---
 arch/arm64/boot/dts/qcom/pm8150.dtsi | 41 ++++++++++++++++++++++++++++
 1 file changed, 41 insertions(+)
 create mode 100644 arch/arm64/boot/dts/qcom/pm8150.dtsi

-- 
2.20.1

Comments

Vinod Koul Aug. 19, 2019, 5:28 p.m. UTC | #1
On 14-08-19, 10:03, Stephen Boyd wrote:
> Quoting Vinod Koul (2019-08-14 05:49:56)

> > Add base DTS file for pm8150 along with GPIOs

> > 

> > Signed-off-by: Vinod Koul <vkoul@kernel.org>

> > ---

> >  arch/arm64/boot/dts/qcom/pm8150.dtsi | 41 ++++++++++++++++++++++++++++

> >  1 file changed, 41 insertions(+)

> >  create mode 100644 arch/arm64/boot/dts/qcom/pm8150.dtsi

> > 

> > diff --git a/arch/arm64/boot/dts/qcom/pm8150.dtsi b/arch/arm64/boot/dts/qcom/pm8150.dtsi

> > new file mode 100644

> > index 000000000000..b533e254a203

> > --- /dev/null

> > +++ b/arch/arm64/boot/dts/qcom/pm8150.dtsi

> > @@ -0,0 +1,41 @@

> > +// SPDX-License-Identifier: BSD-3-Clause

> > +// Copyright (c) 2017-2019, The Linux Foundation. All rights reserved.

> > +// Copyright (c) 2019, Linaro Limited

> > +

> > +#include <dt-bindings/interrupt-controller/irq.h>

> > +#include <dt-bindings/spmi/spmi.h>

> > +

> > +&spmi_bus {

> > +       pm8150_0: pm8150@0 {

> 

> I think node name should be 'pmic'


Yes will fix.
> 

> > +               compatible = "qcom,spmi-pmic";

> 

> This should also have the model number? "qcom,pm8150"?


Added now

> > +               reg = <0x0 SPMI_USID>;

> > +               #address-cells = <1>;

> > +               #size-cells = <0>;

> > +

> > +               pm8150_gpios: gpio@c000 {

> > +                       compatible = "qcom,pm8150-gpio";

> > +                       reg = <0xc000>;

> > +                       gpio-controller;

> > +                       #gpio-cells = <2>;

> > +                       interrupts = <0 0xc0 0 IRQ_TYPE_NONE>,

> > +                                    <0 0xc1 0 IRQ_TYPE_NONE>,

> > +                                    <0 0xc2 0 IRQ_TYPE_NONE>,

> > +                                    <0 0xc3 0 IRQ_TYPE_NONE>,

> > +                                    <0 0xc4 0 IRQ_TYPE_NONE>,

> > +                                    <0 0xc5 0 IRQ_TYPE_NONE>,

> > +                                    <0 0xc6 0 IRQ_TYPE_NONE>,

> > +                                    <0 0xc7 0 IRQ_TYPE_NONE>,

> > +                                    <0 0xc8 0 IRQ_TYPE_NONE>,

> > +                                    <0 0xc9 0 IRQ_TYPE_NONE>,

> > +                                    <0 0xca 0 IRQ_TYPE_NONE>,

> > +                                    <0 0xcb 0 IRQ_TYPE_NONE>;

> > +               };

> > +       };

> > +

> > +       qcom,pm8150@1 {

> 

> Same comment, pmic@1.


right, here and everywhere else

-- 
~Vinod
diff mbox series

Patch

diff --git a/arch/arm64/boot/dts/qcom/pm8150.dtsi b/arch/arm64/boot/dts/qcom/pm8150.dtsi
new file mode 100644
index 000000000000..b533e254a203
--- /dev/null
+++ b/arch/arm64/boot/dts/qcom/pm8150.dtsi
@@ -0,0 +1,41 @@ 
+// SPDX-License-Identifier: BSD-3-Clause
+// Copyright (c) 2017-2019, The Linux Foundation. All rights reserved.
+// Copyright (c) 2019, Linaro Limited
+
+#include <dt-bindings/interrupt-controller/irq.h>
+#include <dt-bindings/spmi/spmi.h>
+
+&spmi_bus {
+	pm8150_0: pm8150@0 {
+		compatible = "qcom,spmi-pmic";
+		reg = <0x0 SPMI_USID>;
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		pm8150_gpios: gpio@c000 {
+			compatible = "qcom,pm8150-gpio";
+			reg = <0xc000>;
+			gpio-controller;
+			#gpio-cells = <2>;
+			interrupts = <0 0xc0 0 IRQ_TYPE_NONE>,
+				     <0 0xc1 0 IRQ_TYPE_NONE>,
+				     <0 0xc2 0 IRQ_TYPE_NONE>,
+				     <0 0xc3 0 IRQ_TYPE_NONE>,
+				     <0 0xc4 0 IRQ_TYPE_NONE>,
+				     <0 0xc5 0 IRQ_TYPE_NONE>,
+				     <0 0xc6 0 IRQ_TYPE_NONE>,
+				     <0 0xc7 0 IRQ_TYPE_NONE>,
+				     <0 0xc8 0 IRQ_TYPE_NONE>,
+				     <0 0xc9 0 IRQ_TYPE_NONE>,
+				     <0 0xca 0 IRQ_TYPE_NONE>,
+				     <0 0xcb 0 IRQ_TYPE_NONE>;
+		};
+	};
+
+	qcom,pm8150@1 {
+		compatible ="qcom,spmi-pmic";
+		reg = <0x1 SPMI_USID>;
+		#address-cells = <1>;
+		#size-cells = <0>;
+	};
+};