@@ -4,6 +4,8 @@
#include <dt-bindings/gpio/gpio.h>
#include "qcs404.dtsi"
#include "pms405.dtsi"
+#include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/pinctrl/qcom,pmic-gpio.h>
/ {
aliases {
@@ -270,6 +272,26 @@ rclk {
};
};
+&pms405_gpios {
+ usb_vbus_boost_pin: usb-vbus-boost-pin {
+ pinconf {
+ pins = "gpio3";
+ function = PMIC_GPIO_FUNC_NORMAL;
+ output-low;
+ power-source = <1>;
+ };
+ };
+ usb3_vbus_pin: usb3-vbus-pin {
+ pinconf {
+ pins = "gpio12";
+ function = PMIC_GPIO_FUNC_NORMAL;
+ input-enable;
+ bias-pull-down;
+ power-source = <1>;
+ };
+ };
+};
+
&wifi {
status = "okay";
vdd-0.8-cx-mx-supply = <&vreg_l2_1p275>;
Defines VBUS detect and VBUS boost for the QCS404 EVB. Detect: VBUS present/absent is presented to the SoC via a GPIO on the EVB. Define the pin mapping for later use by gpio-usb-conn. Boost: An external regulator is used to trigger VBUS on/off via GPIO. This patch defines the relevant GPIO in the EVB dts. Cc: Andy Gross <agross@kernel.org> Cc: Bjorn Andersson <bjorn.andersson@linaro.org> Cc: Rob Herring <robh+dt@kernel.org> Cc: Mark Rutland <mark.rutland@arm.com> Cc: linux-arm-msm@vger.kernel.org Cc: devicetree@vger.kernel.org Cc: linux-kernel@vger.kernel.org Signed-off-by: Bryan O'Donoghue <bryan.odonoghue@linaro.org> --- arch/arm64/boot/dts/qcom/qcs404-evb.dtsi | 22 ++++++++++++++++++++++ 1 file changed, 22 insertions(+)