diff mbox series

[2/3] dt-bindings: mtd: Add a property to declare secure regions in Qcom NANDc

Message ID 20210222120259.94465-3-manivannan.sadhasivam@linaro.org
State New
Headers show
Series Add support for secure regions in Qcom NANDc driver | expand

Commit Message

Manivannan Sadhasivam Feb. 22, 2021, 12:02 p.m. UTC
On a typical end product, a vendor may choose to secure some regions in
the NAND memory which are supposed to stay intact between FW upgrades.
The access to those regions will be blocked by a secure element like
Trustzone. So the normal world software like Linux kernel should not
touch these regions (including reading).

So let's add a property for declaring such secure regions so that the
driver can skip touching them.

Signed-off-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org>
---
 Documentation/devicetree/bindings/mtd/qcom,nandc.yaml | 7 +++++++
 1 file changed, 7 insertions(+)

Comments

Manivannan Sadhasivam Feb. 23, 2021, 5:45 p.m. UTC | #1
Hi Miquel,

On Tue, Feb 23, 2021 at 05:49:22PM +0100, Miquel Raynal wrote:
> Hi Manivannan,
> 
> Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org> wrote on Mon,
> 22 Feb 2021 17:32:58 +0530:
> 
> > On a typical end product, a vendor may choose to secure some regions in
> > the NAND memory which are supposed to stay intact between FW upgrades.
> > The access to those regions will be blocked by a secure element like
> > Trustzone. So the normal world software like Linux kernel should not
> > touch these regions (including reading).
> > 
> > So let's add a property for declaring such secure regions so that the
> > driver can skip touching them.
> > 
> > Signed-off-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org>
> > ---
> >  Documentation/devicetree/bindings/mtd/qcom,nandc.yaml | 7 +++++++
> >  1 file changed, 7 insertions(+)
> > 
> > diff --git a/Documentation/devicetree/bindings/mtd/qcom,nandc.yaml b/Documentation/devicetree/bindings/mtd/qcom,nandc.yaml
> > index 84ad7ff30121..7500e20da9c1 100644
> > --- a/Documentation/devicetree/bindings/mtd/qcom,nandc.yaml
> > +++ b/Documentation/devicetree/bindings/mtd/qcom,nandc.yaml
> > @@ -48,6 +48,13 @@ patternProperties:
> >          enum:
> >            - 512
> >  
> > +      qcom,secure-regions:
> > +        $ref: /schemas/types.yaml#/definitions/uint32-array
> > +        description:
> > +          Regions in the NAND memory which are protected using a secure element
> > +          like Trustzone. This property contains the start address and size of
> > +          the secure regions present (optional).
> 
> What does this "(optional)" means? If you mean the property is optional
> then it should be described accordingly in the yaml file, or am I
> missing something?
> 

IIUC, if a property is not listed under "required" section then it is
optional. But I've added the quote here to just make it explicit.

> I wonder if it wouldn't be better to make this a NAND chip node
> property. I don't think a qcom prefix is needed as potentially many
> other SoCs might have the same "feature".
> 
> I'm fine adding support for it in the qcom driver only though.
> 

Hmm, sounds good to me.

Thanks,
Mani

> > +
> >  allOf:
> >    - $ref: "nand-controller.yaml#"
> >  
> 
> Thanks,
> Miquèl
Rob Herring (Arm) March 5, 2021, 11:36 p.m. UTC | #2
On Mon, Feb 22, 2021 at 05:32:58PM +0530, Manivannan Sadhasivam wrote:
> On a typical end product, a vendor may choose to secure some regions in

> the NAND memory which are supposed to stay intact between FW upgrades.

> The access to those regions will be blocked by a secure element like

> Trustzone. So the normal world software like Linux kernel should not

> touch these regions (including reading).

> 

> So let's add a property for declaring such secure regions so that the

> driver can skip touching them.

> 

> Signed-off-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org>

> ---

>  Documentation/devicetree/bindings/mtd/qcom,nandc.yaml | 7 +++++++

>  1 file changed, 7 insertions(+)

> 

> diff --git a/Documentation/devicetree/bindings/mtd/qcom,nandc.yaml b/Documentation/devicetree/bindings/mtd/qcom,nandc.yaml

> index 84ad7ff30121..7500e20da9c1 100644

> --- a/Documentation/devicetree/bindings/mtd/qcom,nandc.yaml

> +++ b/Documentation/devicetree/bindings/mtd/qcom,nandc.yaml

> @@ -48,6 +48,13 @@ patternProperties:

>          enum:

>            - 512

>  

> +      qcom,secure-regions:

> +        $ref: /schemas/types.yaml#/definitions/uint32-array


Don't you need 64-bit regions potentially? Though 4GB should be enough 
for anyone.

If more than one addr+size, then you need a matrix.

> +        description:

> +          Regions in the NAND memory which are protected using a secure element

> +          like Trustzone. This property contains the start address and size of

> +          the secure regions present (optional).

> +

>  allOf:

>    - $ref: "nand-controller.yaml#"

>  

> -- 

> 2.25.1

>
Manivannan Sadhasivam March 10, 2021, 3:45 a.m. UTC | #3
On Tue, Mar 09, 2021 at 07:32:28PM -0700, Rob Herring wrote:
> On Sun, Mar 7, 2021 at 10:31 PM Manivannan Sadhasivam
> <manivannan.sadhasivam@linaro.org> wrote:
> >
> > On Fri, Mar 05, 2021 at 05:36:57PM -0600, Rob Herring wrote:
> > > On Mon, Feb 22, 2021 at 05:32:58PM +0530, Manivannan Sadhasivam wrote:
> > > > On a typical end product, a vendor may choose to secure some regions in
> > > > the NAND memory which are supposed to stay intact between FW upgrades.
> > > > The access to those regions will be blocked by a secure element like
> > > > Trustzone. So the normal world software like Linux kernel should not
> > > > touch these regions (including reading).
> > > >
> > > > So let's add a property for declaring such secure regions so that the
> > > > driver can skip touching them.
> > > >
> > > > Signed-off-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org>
> > > > ---
> > > >  Documentation/devicetree/bindings/mtd/qcom,nandc.yaml | 7 +++++++
> > > >  1 file changed, 7 insertions(+)
> > > >
> > > > diff --git a/Documentation/devicetree/bindings/mtd/qcom,nandc.yaml b/Documentation/devicetree/bindings/mtd/qcom,nandc.yaml
> > > > index 84ad7ff30121..7500e20da9c1 100644
> > > > --- a/Documentation/devicetree/bindings/mtd/qcom,nandc.yaml
> > > > +++ b/Documentation/devicetree/bindings/mtd/qcom,nandc.yaml
> > > > @@ -48,6 +48,13 @@ patternProperties:
> > > >          enum:
> > > >            - 512
> > > >
> > > > +      qcom,secure-regions:
> > > > +        $ref: /schemas/types.yaml#/definitions/uint32-array
> > >
> > > Don't you need 64-bit regions potentially? Though 4GB should be enough
> > > for anyone.
> > >
> >
> > Yes, given the size of current NAND based systems around, I thought 32 bit is
> > enough.
> 
> Huh!? I was joking. 4GB is small nowadays. Make this 64-bit.
> 

Well I was speaking in the context of Qcom chipsets making use of NAND. Mostly
the Qcom modem chipsets have <4GB of memory. But since this property is now not
specific to Qcom, I agree with you and will make it 64 bit.

Thanks,
Mani

> Rob
diff mbox series

Patch

diff --git a/Documentation/devicetree/bindings/mtd/qcom,nandc.yaml b/Documentation/devicetree/bindings/mtd/qcom,nandc.yaml
index 84ad7ff30121..7500e20da9c1 100644
--- a/Documentation/devicetree/bindings/mtd/qcom,nandc.yaml
+++ b/Documentation/devicetree/bindings/mtd/qcom,nandc.yaml
@@ -48,6 +48,13 @@  patternProperties:
         enum:
           - 512
 
+      qcom,secure-regions:
+        $ref: /schemas/types.yaml#/definitions/uint32-array
+        description:
+          Regions in the NAND memory which are protected using a secure element
+          like Trustzone. This property contains the start address and size of
+          the secure regions present (optional).
+
 allOf:
   - $ref: "nand-controller.yaml#"