| Message ID | 20210708120656.663851-2-thara.gopinath@linaro.org |
|---|---|
| State | Superseded |
| Headers | show |
| Series | Introduce LMh driver for Qualcomm SoCs | expand |
On Thu 08 Jul 07:06 CDT 2021, Thara Gopinath wrote: > Introduce SCM calls to access/configure limits management hardware(LMH). > > Signed-off-by: Thara Gopinath <thara.gopinath@linaro.org> Reviewed-by: Bjorn Andersson <bjorn.andersson@linaro.org> Regards, Bjorn > --- > > v2->v3: > Added freeing of payload_buf after the scm call in qcom_scm_lmh_dcvsh as per > Matthias review comments. > > v1->v2: > Changed the input parameters in qcom_scm_lmh_dcvsh from payload_buf and > payload_size to payload_fn, payload_reg, payload_val as per Bjorn's review > comments. > > drivers/firmware/qcom_scm.c | 58 +++++++++++++++++++++++++++++++++++++ > drivers/firmware/qcom_scm.h | 4 +++ > include/linux/qcom_scm.h | 14 +++++++++ > 3 files changed, 76 insertions(+) > > diff --git a/drivers/firmware/qcom_scm.c b/drivers/firmware/qcom_scm.c > index ee9cb545e73b..a8d236603e90 100644 > --- a/drivers/firmware/qcom_scm.c > +++ b/drivers/firmware/qcom_scm.c > @@ -1147,6 +1147,64 @@ int qcom_scm_qsmmu500_wait_safe_toggle(bool en) > } > EXPORT_SYMBOL(qcom_scm_qsmmu500_wait_safe_toggle); > > +bool qcom_scm_lmh_dcvsh_available(void) > +{ > + return __qcom_scm_is_call_available(__scm->dev, QCOM_SCM_SVC_LMH, QCOM_SCM_LMH_LIMIT_DCVSH); > +} > +EXPORT_SYMBOL(qcom_scm_lmh_dcvsh_available); > + > +int qcom_scm_lmh_profile_change(u32 profile_id) > +{ > + struct qcom_scm_desc desc = { > + .svc = QCOM_SCM_SVC_LMH, > + .cmd = QCOM_SCM_LMH_LIMIT_PROFILE_CHANGE, > + .arginfo = QCOM_SCM_ARGS(1, QCOM_SCM_VAL), > + .args[0] = profile_id, > + .owner = ARM_SMCCC_OWNER_SIP, > + }; > + > + return qcom_scm_call(__scm->dev, &desc, NULL); > +} > +EXPORT_SYMBOL(qcom_scm_lmh_profile_change); > + > +int qcom_scm_lmh_dcvsh(u32 payload_fn, u32 payload_reg, u32 payload_val, > + u64 limit_node, u32 node_id, u64 version) > +{ > + dma_addr_t payload_phys; > + u32 *payload_buf; > + int ret, payload_size = 5 * sizeof(u32); > + > + struct qcom_scm_desc desc = { > + .svc = QCOM_SCM_SVC_LMH, > + .cmd = QCOM_SCM_LMH_LIMIT_DCVSH, > + .arginfo = QCOM_SCM_ARGS(5, QCOM_SCM_RO, QCOM_SCM_VAL, QCOM_SCM_VAL, > + QCOM_SCM_VAL, QCOM_SCM_VAL), > + .args[1] = payload_size, > + .args[2] = limit_node, > + .args[3] = node_id, > + .args[4] = version, > + .owner = ARM_SMCCC_OWNER_SIP, > + }; > + > + payload_buf = dma_alloc_coherent(__scm->dev, payload_size, &payload_phys, GFP_KERNEL); > + if (!payload_buf) > + return -ENOMEM; > + > + payload_buf[0] = payload_fn; > + payload_buf[1] = 0; > + payload_buf[2] = payload_reg; > + payload_buf[3] = 1; > + payload_buf[4] = payload_val; > + > + desc.args[0] = payload_phys; > + > + ret = qcom_scm_call(__scm->dev, &desc, NULL); > + > + dma_free_coherent(__scm->dev, payload_size, payload_buf, payload_phys); > + return ret; > +} > +EXPORT_SYMBOL(qcom_scm_lmh_dcvsh); > + > static int qcom_scm_find_dload_address(struct device *dev, u64 *addr) > { > struct device_node *tcsr; > diff --git a/drivers/firmware/qcom_scm.h b/drivers/firmware/qcom_scm.h > index 632fe3142462..d92156ceb3ac 100644 > --- a/drivers/firmware/qcom_scm.h > +++ b/drivers/firmware/qcom_scm.h > @@ -114,6 +114,10 @@ extern int scm_legacy_call(struct device *dev, const struct qcom_scm_desc *desc, > #define QCOM_SCM_SVC_HDCP 0x11 > #define QCOM_SCM_HDCP_INVOKE 0x01 > > +#define QCOM_SCM_SVC_LMH 0x13 > +#define QCOM_SCM_LMH_LIMIT_PROFILE_CHANGE 0x01 > +#define QCOM_SCM_LMH_LIMIT_DCVSH 0x10 > + > #define QCOM_SCM_SVC_SMMU_PROGRAM 0x15 > #define QCOM_SCM_SMMU_CONFIG_ERRATA1 0x03 > #define QCOM_SCM_SMMU_CONFIG_ERRATA1_CLIENT_ALL 0x02 > diff --git a/include/linux/qcom_scm.h b/include/linux/qcom_scm.h > index 0165824c5128..c0475d1c9885 100644 > --- a/include/linux/qcom_scm.h > +++ b/include/linux/qcom_scm.h > @@ -109,6 +109,12 @@ extern int qcom_scm_hdcp_req(struct qcom_scm_hdcp_req *req, u32 req_cnt, > u32 *resp); > > extern int qcom_scm_qsmmu500_wait_safe_toggle(bool en); > + > +extern int qcom_scm_lmh_dcvsh(u32 payload_fn, u32 payload_reg, u32 payload_val, > + u64 limit_node, u32 node_id, u64 version); > +extern int qcom_scm_lmh_profile_change(u32 profile_id); > +extern bool qcom_scm_lmh_dcvsh_available(void); > + > #else > > #include <linux/errno.h> > @@ -170,5 +176,13 @@ static inline int qcom_scm_hdcp_req(struct qcom_scm_hdcp_req *req, u32 req_cnt, > > static inline int qcom_scm_qsmmu500_wait_safe_toggle(bool en) > { return -ENODEV; } > + > +static inline int qcom_scm_lmh_dcvsh(u32 payload_fn, u32 payload_reg, u32 payload_val, > + u64 limit_node, u32 node_id, u64 version) > + { return -ENODEV; } > + > +static inline int qcom_scm_lmh_profile_change(u32 profile_id) { return -ENODEV; } > + > +static inline bool qcom_scm_lmh_dcvsh_available(void) { return -ENODEV; } > #endif > #endif > -- > 2.25.1 >
diff --git a/drivers/firmware/qcom_scm.c b/drivers/firmware/qcom_scm.c index ee9cb545e73b..a8d236603e90 100644 --- a/drivers/firmware/qcom_scm.c +++ b/drivers/firmware/qcom_scm.c @@ -1147,6 +1147,64 @@ int qcom_scm_qsmmu500_wait_safe_toggle(bool en) } EXPORT_SYMBOL(qcom_scm_qsmmu500_wait_safe_toggle); +bool qcom_scm_lmh_dcvsh_available(void) +{ + return __qcom_scm_is_call_available(__scm->dev, QCOM_SCM_SVC_LMH, QCOM_SCM_LMH_LIMIT_DCVSH); +} +EXPORT_SYMBOL(qcom_scm_lmh_dcvsh_available); + +int qcom_scm_lmh_profile_change(u32 profile_id) +{ + struct qcom_scm_desc desc = { + .svc = QCOM_SCM_SVC_LMH, + .cmd = QCOM_SCM_LMH_LIMIT_PROFILE_CHANGE, + .arginfo = QCOM_SCM_ARGS(1, QCOM_SCM_VAL), + .args[0] = profile_id, + .owner = ARM_SMCCC_OWNER_SIP, + }; + + return qcom_scm_call(__scm->dev, &desc, NULL); +} +EXPORT_SYMBOL(qcom_scm_lmh_profile_change); + +int qcom_scm_lmh_dcvsh(u32 payload_fn, u32 payload_reg, u32 payload_val, + u64 limit_node, u32 node_id, u64 version) +{ + dma_addr_t payload_phys; + u32 *payload_buf; + int ret, payload_size = 5 * sizeof(u32); + + struct qcom_scm_desc desc = { + .svc = QCOM_SCM_SVC_LMH, + .cmd = QCOM_SCM_LMH_LIMIT_DCVSH, + .arginfo = QCOM_SCM_ARGS(5, QCOM_SCM_RO, QCOM_SCM_VAL, QCOM_SCM_VAL, + QCOM_SCM_VAL, QCOM_SCM_VAL), + .args[1] = payload_size, + .args[2] = limit_node, + .args[3] = node_id, + .args[4] = version, + .owner = ARM_SMCCC_OWNER_SIP, + }; + + payload_buf = dma_alloc_coherent(__scm->dev, payload_size, &payload_phys, GFP_KERNEL); + if (!payload_buf) + return -ENOMEM; + + payload_buf[0] = payload_fn; + payload_buf[1] = 0; + payload_buf[2] = payload_reg; + payload_buf[3] = 1; + payload_buf[4] = payload_val; + + desc.args[0] = payload_phys; + + ret = qcom_scm_call(__scm->dev, &desc, NULL); + + dma_free_coherent(__scm->dev, payload_size, payload_buf, payload_phys); + return ret; +} +EXPORT_SYMBOL(qcom_scm_lmh_dcvsh); + static int qcom_scm_find_dload_address(struct device *dev, u64 *addr) { struct device_node *tcsr; diff --git a/drivers/firmware/qcom_scm.h b/drivers/firmware/qcom_scm.h index 632fe3142462..d92156ceb3ac 100644 --- a/drivers/firmware/qcom_scm.h +++ b/drivers/firmware/qcom_scm.h @@ -114,6 +114,10 @@ extern int scm_legacy_call(struct device *dev, const struct qcom_scm_desc *desc, #define QCOM_SCM_SVC_HDCP 0x11 #define QCOM_SCM_HDCP_INVOKE 0x01 +#define QCOM_SCM_SVC_LMH 0x13 +#define QCOM_SCM_LMH_LIMIT_PROFILE_CHANGE 0x01 +#define QCOM_SCM_LMH_LIMIT_DCVSH 0x10 + #define QCOM_SCM_SVC_SMMU_PROGRAM 0x15 #define QCOM_SCM_SMMU_CONFIG_ERRATA1 0x03 #define QCOM_SCM_SMMU_CONFIG_ERRATA1_CLIENT_ALL 0x02 diff --git a/include/linux/qcom_scm.h b/include/linux/qcom_scm.h index 0165824c5128..c0475d1c9885 100644 --- a/include/linux/qcom_scm.h +++ b/include/linux/qcom_scm.h @@ -109,6 +109,12 @@ extern int qcom_scm_hdcp_req(struct qcom_scm_hdcp_req *req, u32 req_cnt, u32 *resp); extern int qcom_scm_qsmmu500_wait_safe_toggle(bool en); + +extern int qcom_scm_lmh_dcvsh(u32 payload_fn, u32 payload_reg, u32 payload_val, + u64 limit_node, u32 node_id, u64 version); +extern int qcom_scm_lmh_profile_change(u32 profile_id); +extern bool qcom_scm_lmh_dcvsh_available(void); + #else #include <linux/errno.h> @@ -170,5 +176,13 @@ static inline int qcom_scm_hdcp_req(struct qcom_scm_hdcp_req *req, u32 req_cnt, static inline int qcom_scm_qsmmu500_wait_safe_toggle(bool en) { return -ENODEV; } + +static inline int qcom_scm_lmh_dcvsh(u32 payload_fn, u32 payload_reg, u32 payload_val, + u64 limit_node, u32 node_id, u64 version) + { return -ENODEV; } + +static inline int qcom_scm_lmh_profile_change(u32 profile_id) { return -ENODEV; } + +static inline bool qcom_scm_lmh_dcvsh_available(void) { return -ENODEV; } #endif #endif
Introduce SCM calls to access/configure limits management hardware(LMH). Signed-off-by: Thara Gopinath <thara.gopinath@linaro.org> --- v2->v3: Added freeing of payload_buf after the scm call in qcom_scm_lmh_dcvsh as per Matthias review comments. v1->v2: Changed the input parameters in qcom_scm_lmh_dcvsh from payload_buf and payload_size to payload_fn, payload_reg, payload_val as per Bjorn's review comments. drivers/firmware/qcom_scm.c | 58 +++++++++++++++++++++++++++++++++++++ drivers/firmware/qcom_scm.h | 4 +++ include/linux/qcom_scm.h | 14 +++++++++ 3 files changed, 76 insertions(+) -- 2.25.1