diff mbox series

[v4,10/24] drm/bridge: lt8912b: Register and attach our DSI device at probe

Message ID 20210910101218.1632297-11-maxime@cerno.tech
State Accepted
Commit d89078c37b10f05fa4f4791b71db2572db361b68
Headers show
Series drm/bridge: Make panel and bridge probe order consistent | expand

Commit Message

Maxime Ripard Sept. 10, 2021, 10:12 a.m. UTC
In order to avoid any probe ordering issue, the best practice is to move
the secondary MIPI-DSI device registration and attachment to the
MIPI-DSI host at probe time. Let's do this.

Signed-off-by: Maxime Ripard <maxime@cerno.tech>
---
 drivers/gpu/drm/bridge/lontium-lt8912b.c | 11 +++++++----
 1 file changed, 7 insertions(+), 4 deletions(-)
diff mbox series

Patch

diff --git a/drivers/gpu/drm/bridge/lontium-lt8912b.c b/drivers/gpu/drm/bridge/lontium-lt8912b.c
index cc968d65936b..c642d1e02b2f 100644
--- a/drivers/gpu/drm/bridge/lontium-lt8912b.c
+++ b/drivers/gpu/drm/bridge/lontium-lt8912b.c
@@ -544,10 +544,6 @@  static int lt8912_bridge_attach(struct drm_bridge *bridge,
 	if (ret)
 		goto error;
 
-	ret = lt8912_attach_dsi(lt);
-	if (ret)
-		goto error;
-
 	lt->is_attached = true;
 
 	return 0;
@@ -706,8 +702,15 @@  static int lt8912_probe(struct i2c_client *client,
 
 	drm_bridge_add(&lt->bridge);
 
+	ret = lt8912_attach_dsi(lt);
+	if (ret)
+		goto err_attach;
+
 	return 0;
 
+err_attach:
+	drm_bridge_remove(&lt->bridge);
+	lt8912_free_i2c(lt);
 err_i2c:
 	lt8912_put_dt(lt);
 err_dt_parse: