diff mbox series

[v5,4/7] media: venus: hfi: Skip AON register programming for V6 1pipe

Message ID 20211005081048.3095252-5-stanimir.varbanov@linaro.org
State New
Headers show
Series [v5,1/7] venus: firmware: enable no tz fw loading for sc7280 | expand

Commit Message

Stanimir Varbanov Oct. 5, 2021, 8:10 a.m. UTC 
From: Dikshita Agarwal <dikshita@codeaurora.org>


AON register programming is used to set NOC to low power mode
during V6 power off sequence. However AON register memory map
is not applicable to 1pipe, hence skipping AON register programming.

Co-developed-by: Mansur Alisha Shaik <mansur@codeaurora.org>
Signed-off-by: Mansur Alisha Shaik <mansur@codeaurora.org>

Co-developed-by: Vikash Garodia <vgarodia@codeaurora.org>
Signed-off-by: Vikash Garodia <vgarodia@codeaurora.org>

Signed-off-by: Dikshita Agarwal <dikshita@codeaurora.org>

Acked-by: Stanimir Varbanov <stanimir.varbanov@linaro.org>

Signed-off-by: Stanimir Varbanov <stanimir.varbanov@linaro.org>

---
 drivers/media/platform/qcom/venus/hfi_venus.c | 4 ++++
 1 file changed, 4 insertions(+)

-- 
2.25.1
diff mbox series

Patch

diff --git a/drivers/media/platform/qcom/venus/hfi_venus.c b/drivers/media/platform/qcom/venus/hfi_venus.c
index ce98c523b3c6..3a75a27632fb 100644
--- a/drivers/media/platform/qcom/venus/hfi_venus.c
+++ b/drivers/media/platform/qcom/venus/hfi_venus.c
@@ -551,6 +551,9 @@  static int venus_halt_axi(struct venus_hfi_device *hdev)
 	if (IS_V6(hdev->core)) {
 		writel(0x3, cpu_cs_base + CPU_CS_X2RPMH_V6);
 
+		if (hdev->core->res->num_vpp_pipes == 1)
+			goto skip_aon_mvp_noc;
+
 		writel(0x1, aon_base + AON_WRAPPER_MVP_NOC_LPI_CONTROL);
 		ret = readl_poll_timeout(aon_base + AON_WRAPPER_MVP_NOC_LPI_STATUS,
 					 val,
@@ -560,6 +563,7 @@  static int venus_halt_axi(struct venus_hfi_device *hdev)
 		if (ret)
 			return -ETIMEDOUT;
 
+skip_aon_mvp_noc:
 		mask_val = (BIT(2) | BIT(1) | BIT(0));
 		writel(mask_val, wrapper_base + WRAPPER_DEBUG_BRIDGE_LPI_CONTROL_V6);