From patchwork Wed Oct 6 03:53:58 2021 Content-Type: text/plain; charset="utf-8" MIME-Version: 1.0 Content-Transfer-Encoding: 7bit X-Patchwork-Submitter: Dmitry Baryshkov X-Patchwork-Id: 515275 Delivered-To: patch@linaro.org Received: by 2002:ac0:890a:0:0:0:0:0 with SMTP id 10csp155038imy; Tue, 5 Oct 2021 20:54:33 -0700 (PDT) X-Google-Smtp-Source: ABdhPJzu+QgVOI4U0zpwl6tsZBLExunNUQWarZmqQonoTPDpyBDwGUvWUvvNx5mtsaUvXfFagXl8 X-Received: by 2002:a17:906:3f83:: with SMTP id b3mr30412702ejj.233.1633492472913; Tue, 05 Oct 2021 20:54:32 -0700 (PDT) ARC-Seal: i=1; a=rsa-sha256; t=1633492472; cv=none; d=google.com; s=arc-20160816; b=PAfF4P2aVaeKKhHHau2RK0w9z3H3hfcD+xC57YMLrdUPXn1y4+WF2teagzVD0ZMyUR Oiu4madbOKsxoo/pl66kDaE6ZtMcWMTr/KsZnBdGWneLm4NiyS0dS2FKZo8GMaU6Vl5B oaf1yv128B14S0NTBH4FyjWVlhFTYwDGYcWIvqIUtlKs4nTjeLUJY6kaX0X1F+vL2DU8 eVLA7EH5uj+9H1FTYagl9Ehgbz5nAyknLzxFvArzOzKjaTd0ozUPQfTCbzYvnk0Drr3/ d6oZ7tJgvXm9JX6ZGzBhtQfOVrWHEYsY11HpKfKbKYOnyaKpTSUGVO/a5zCx2+Z3Vllx Yzgg== ARC-Message-Signature: i=1; a=rsa-sha256; c=relaxed/relaxed; d=google.com; s=arc-20160816; h=list-id:precedence:content-transfer-encoding:mime-version :references:in-reply-to:message-id:date:subject:cc:to:from :dkim-signature; bh=mcNit0g6jUmmUjsU7FAtIRduJRJ7wpPHtyysZeeAHFY=; b=kH5KkteUy1KLz5Eyq8NN9y9M6ERcbxgTgLvgqoWebTo3dTTy1JnFpA3oa5xZqr1A/e s+qOfq5buzYnRWuSIWjLnNDUhIhV7UTWoWqECd/cRwzzNKv88TgXZ4JPNTFNs8CxVlxZ 2wToRpgtUnPetJkFthCYHQ5wzkE5yo5LGn6H39R34Myw9NNxP5Dn8ZHETOMSfiJh+gdI hItl/xHL+dtwW5XB+IRdDPqWaEtuINYvDx5sx62ji+KW6B3VD+joACiI2L2UzWr4zJXg /dhFp4US6QTtmrnPex2gLTt+ax/z7e/2wdyxSPxhXZdT6yRlOgvBpalOoCp7mlqeXW8T Xmuw== ARC-Authentication-Results: i=1; mx.google.com; dkim=pass header.i=@linaro.org header.s=google header.b=Xh2nneBb; spf=pass (google.com: domain of linux-arm-msm-owner@vger.kernel.org designates 23.128.96.18 as permitted sender) smtp.mailfrom=linux-arm-msm-owner@vger.kernel.org; dmarc=pass (p=NONE sp=NONE dis=NONE) header.from=linaro.org Return-Path: Received: from vger.kernel.org (vger.kernel.org. [23.128.96.18]) by mx.google.com with ESMTP id eb13si4889864edb.395.2021.10.05.20.54.32; Tue, 05 Oct 2021 20:54:32 -0700 (PDT) Received-SPF: pass (google.com: domain of linux-arm-msm-owner@vger.kernel.org designates 23.128.96.18 as permitted sender) client-ip=23.128.96.18; Authentication-Results: mx.google.com; dkim=pass header.i=@linaro.org header.s=google header.b=Xh2nneBb; spf=pass (google.com: domain of linux-arm-msm-owner@vger.kernel.org designates 23.128.96.18 as permitted sender) smtp.mailfrom=linux-arm-msm-owner@vger.kernel.org; dmarc=pass (p=NONE sp=NONE dis=NONE) header.from=linaro.org Received: (majordomo@vger.kernel.org) by vger.kernel.org via listexpand id S237465AbhJFD4T (ORCPT + 17 others); Tue, 5 Oct 2021 23:56:19 -0400 Received: from lindbergh.monkeyblade.net ([23.128.96.19]:32976 "EHLO lindbergh.monkeyblade.net" rhost-flags-OK-OK-OK-OK) by vger.kernel.org with ESMTP id S237365AbhJFD4K (ORCPT ); Tue, 5 Oct 2021 23:56:10 -0400 Received: from mail-lf1-x12e.google.com (mail-lf1-x12e.google.com [IPv6:2a00:1450:4864:20::12e]) by lindbergh.monkeyblade.net (Postfix) with ESMTPS id 66A77C061793 for ; Tue, 5 Oct 2021 20:54:18 -0700 (PDT) Received: by mail-lf1-x12e.google.com with SMTP id t9so4632496lfd.1 for ; Tue, 05 Oct 2021 20:54:18 -0700 (PDT) DKIM-Signature: v=1; a=rsa-sha256; c=relaxed/relaxed; d=linaro.org; s=google; h=from:to:cc:subject:date:message-id:in-reply-to:references :mime-version:content-transfer-encoding; bh=mcNit0g6jUmmUjsU7FAtIRduJRJ7wpPHtyysZeeAHFY=; b=Xh2nneBb/87+tArNL4Ub5gViAzfXJDIt0nN7Bymb9OpZLb9P/imlrckWJlA/M+3cTt 7c8eGMzP7lXSIDLkTnIlfWXLR6Xt8rclJjKYOUk4e73SzYY5wYBvp2wpcbGuRMrQRVAv pNJ0hBoGw9uU0TfZASPIBvt36O//ykJfspidjcIBqyIqYOZBX/QzyrooyiirypL/kuXu 8tdfTQXThfx9NQsFJCPxqhgIjTpcA6bKlxLAp0JTBCeEwhnvOiswNRfaC3Rhbx2jvg2N enaYRfssXa/hK05/CkZxpLji7C7cni+x1/ooPHyZAFJhfzZw6eKLiuxEBSKAx79g7fSf cqyA== X-Google-DKIM-Signature: v=1; a=rsa-sha256; c=relaxed/relaxed; d=1e100.net; s=20210112; h=x-gm-message-state:from:to:cc:subject:date:message-id:in-reply-to :references:mime-version:content-transfer-encoding; bh=mcNit0g6jUmmUjsU7FAtIRduJRJ7wpPHtyysZeeAHFY=; b=qcMGKke+XK8w6tBuMdW1bL97UbFh12y4arNiG5zdawKqgPeLUDVSp+yGzCjOa4H9nY 1H2XzSxx6NejhUBg61cjIMnkLmladrWTC0wOR/awmxYDwnuuFtczFUddKnlLmjj6rfBu uy/I/la2pu2SNlrlySjlgS6Y6euE/oVASGEbsokWRAmZOI6JZBC62pJtOG9ZdfOkQYuV A5P+bHRVDPa/Wzd5n1cIv5u39MgSok0ZskQHEUZU9f2FObjjuo0dHzA/IX/6RA19FY66 vvT+aU3yvpwL5yycafjV5JnddPOhKwsGEGweiw55UJEFGypLiasJsW/hZcZQgO/+kW9n I5+Q== X-Gm-Message-State: AOAM532zXd1jRtnpumZNAwi6TuSfmUADWNzefgtYjmFnmmxrG4Pa760S 6B/f0TCxKDenMCQjP9nyc+BgVQ== X-Received: by 2002:a05:651c:1615:: with SMTP id f21mr11860995ljq.318.1633492456613; Tue, 05 Oct 2021 20:54:16 -0700 (PDT) Received: from eriador.lan ([37.153.55.125]) by smtp.gmail.com with ESMTPSA id s4sm2142967lfd.103.2021.10.05.20.54.15 (version=TLS1_3 cipher=TLS_AES_256_GCM_SHA384 bits=256/256); Tue, 05 Oct 2021 20:54:16 -0700 (PDT) From: Dmitry Baryshkov To: Andy Gross , Bjorn Andersson , Ulf Hansson , Marcel Holtmann , Johan Hedberg , Luiz Augusto von Dentz , Kalle Valo , "David S. Miller" , Jakub Kicinski , Stanimir Varbanov Cc: linux-arm-msm@vger.kernel.org, linux-mmc@vger.kernel.org, linux-kernel@vger.kernel.org, linux-bluetooth@vger.kernel.org, ath10k@lists.infradead.org, linux-wireless@vger.kernel.org, netdev@vger.kernel.org Subject: [PATCH v1 06/15] pwrseq: add support for QCA BT+WiFi power sequencer Date: Wed, 6 Oct 2021 06:53:58 +0300 Message-Id: <20211006035407.1147909-7-dmitry.baryshkov@linaro.org> X-Mailer: git-send-email 2.33.0 In-Reply-To: <20211006035407.1147909-1-dmitry.baryshkov@linaro.org> References: <20211006035407.1147909-1-dmitry.baryshkov@linaro.org> MIME-Version: 1.0 Precedence: bulk List-ID: X-Mailing-List: linux-arm-msm@vger.kernel.org Add support for power sequencer used in the Qualcomm BT+WiFi SoCs. They require several external volate regulators and some of them use separate BT and WiFi enable GPIO pins. This code is mostly extracted from the hci_qca.c bluetooth driver and ath10k WiFi driver. Instead of having each of them manage pins, different requirements, regulator types, move this knowledge to the common power sequencer driver. Currently original drivers are not stripped from the regulator code, this will be done later (to keep compatibility with the old device trees). Signed-off-by: Dmitry Baryshkov --- drivers/power/pwrseq/Kconfig | 14 ++ drivers/power/pwrseq/Makefile | 1 + drivers/power/pwrseq/pwrseq_qca.c | 373 ++++++++++++++++++++++++++++++ 3 files changed, 388 insertions(+) create mode 100644 drivers/power/pwrseq/pwrseq_qca.c -- 2.33.0 diff --git a/drivers/power/pwrseq/Kconfig b/drivers/power/pwrseq/Kconfig index 1985f13d9193..7983e37c7855 100644 --- a/drivers/power/pwrseq/Kconfig +++ b/drivers/power/pwrseq/Kconfig @@ -22,6 +22,20 @@ config PWRSEQ_EMMC This driver can also be built as a module. If so, the module will be called pwrseq_emmc. +config PWRSEQ_QCA + tristate "Power Sequencer for Qualcomm WiFi + BT SoCs" + depends on OF + help + If you say yes to this option, support will be included for Qualcomm + WCN399x,QCA639x,QCA67xx families of hybrid WiFi and Bluetooth SoCs. + Note, this driver supports only power control for these SoC, you + still have to enable individual Bluetooth and WiFi drivers. This + driver is only necessary on ARM platforms with these chips. PCIe + cards handle power sequencing on their own. + + Say M here if you want to include support for Qualcomm WiFi+BT SoCs + as a module. This will build a module called "pwrseq_qca". + config PWRSEQ_SD8787 tristate "HW reset support for SD8787 BT + Wifi module" depends on OF diff --git a/drivers/power/pwrseq/Makefile b/drivers/power/pwrseq/Makefile index 6f359d228843..556bf5582d47 100644 --- a/drivers/power/pwrseq/Makefile +++ b/drivers/power/pwrseq/Makefile @@ -6,5 +6,6 @@ obj-$(CONFIG_PWRSEQ) += core.o obj-$(CONFIG_PWRSEQ_EMMC) += pwrseq_emmc.o +obj-$(CONFIG_PWRSEQ_QCA) += pwrseq_qca.o obj-$(CONFIG_PWRSEQ_SD8787) += pwrseq_sd8787.o obj-$(CONFIG_PWRSEQ_SIMPLE) += pwrseq_simple.o diff --git a/drivers/power/pwrseq/pwrseq_qca.c b/drivers/power/pwrseq/pwrseq_qca.c new file mode 100644 index 000000000000..c15508cc80d2 --- /dev/null +++ b/drivers/power/pwrseq/pwrseq_qca.c @@ -0,0 +1,373 @@ +// SPDX-License-Identifier: GPL-2.0-only +/* + * Copyright (c) 2021, Linaro Ltd. + * + * Author: Dmitry Baryshkov + * + * Power Sequencer for Qualcomm WiFi + BT SoCs + */ + +#include +#include +#include +#include +#include +#include +#include +#include + +/* susclk rate */ +#define SUSCLK_RATE_32KHZ 32768 + +/* + * Voltage regulator information required for configuring the + * QCA WiFi+Bluetooth chipset + */ +struct qca_vreg { + const char *name; + unsigned int load_uA; +}; + +struct qca_device_data { + bool has_enable_gpios; + + /* + * VDDIO has to be enabled before the rest of regulators, so we treat + * it separately + */ + struct qca_vreg vddio; + + size_t num_vregs; + struct qca_vreg vregs[]; +}; + +struct pwrseq_qca_common { + struct gpio_desc *sw_ctrl; + struct clk *susclk; + + /* + * Again vddio is separate so that it can be enabled before enabling + * other regulators. + */ + struct regulator *vddio; + int num_vregs; + struct regulator_bulk_data vregs[]; +}; + +struct pwrseq_qca_one { + struct pwrseq_qca_common *common; + struct gpio_desc *enable; +}; + +#define PWRSEQ_QCA_WIFI 0 +#define PWRSEQ_QCA_BT 1 + +#define PWRSEQ_QCA_MAX 2 + +struct pwrseq_qca { + struct pwrseq_qca_one pwrseq_qcas[PWRSEQ_QCA_MAX]; + struct pwrseq_qca_common common; +}; + +static int pwrseq_qca_pre_power_on(struct pwrseq *pwrseq) +{ + struct pwrseq_qca_one *qca_one = pwrseq_get_drvdata(pwrseq); + + if (qca_one->enable) { + gpiod_set_value_cansleep(qca_one->enable, 0); + msleep(50); + } + + return 0; +} + +static int pwrseq_qca_power_on(struct pwrseq *pwrseq) +{ + struct pwrseq_qca_one *qca_one = pwrseq_get_drvdata(pwrseq); + int ret; + + if (qca_one->common->vddio) { + ret = regulator_enable(qca_one->common->vddio); + if (ret) + return ret; + } + + ret = regulator_bulk_enable(qca_one->common->num_vregs, qca_one->common->vregs); + if (ret) + goto err_bulk; + + ret = clk_prepare_enable(qca_one->common->susclk); + if (ret) + goto err_clk; + + if (qca_one->enable) { + gpiod_set_value_cansleep(qca_one->enable, 1); + msleep(150); + } + + if (qca_one->common->sw_ctrl) { + bool sw_ctrl_state = gpiod_get_value_cansleep(qca_one->common->sw_ctrl); + dev_dbg(&pwrseq->dev, "SW_CTRL is %d", sw_ctrl_state); + } + + return 0; + +err_clk: + regulator_bulk_disable(qca_one->common->num_vregs, qca_one->common->vregs); +err_bulk: + regulator_disable(qca_one->common->vddio); + + return ret; +} + +static void pwrseq_qca_power_off(struct pwrseq *pwrseq) +{ + struct pwrseq_qca_one *qca_one = pwrseq_get_drvdata(pwrseq); + + if (qca_one->enable) { + gpiod_set_value_cansleep(qca_one->enable, 0); + msleep(50); + } + + clk_disable_unprepare(qca_one->common->susclk); + + regulator_bulk_disable(qca_one->common->num_vregs, qca_one->common->vregs); + regulator_disable(qca_one->common->vddio); + + if (qca_one->common->sw_ctrl) { + bool sw_ctrl_state = gpiod_get_value_cansleep(qca_one->common->sw_ctrl); + dev_dbg(&pwrseq->dev, "SW_CTRL is %d", sw_ctrl_state); + } +} + +static const struct pwrseq_ops pwrseq_qca_ops = { + .pre_power_on = pwrseq_qca_pre_power_on, + .power_on = pwrseq_qca_power_on, + .power_off = pwrseq_qca_power_off, +}; + +static int pwrseq_qca_common_init(struct device *dev, struct pwrseq_qca_common *qca_common, + const struct qca_device_data *data) +{ + int ret, i; + + if (data->vddio.name) { + qca_common->vddio = devm_regulator_get(dev, data->vddio.name); + if (IS_ERR(qca_common->vddio)) + return PTR_ERR(qca_common->vddio); + + ret = regulator_set_load(qca_common->vddio, data->vddio.load_uA); + if (ret) + return ret; + } + + qca_common->num_vregs = data->num_vregs; + + for (i = 0; i < qca_common->num_vregs; i++) + qca_common->vregs[i].supply = data->vregs[i].name; + + ret = devm_regulator_bulk_get(dev, qca_common->num_vregs, qca_common->vregs); + if (ret) + return ret; + + for (i = 0; i < qca_common->num_vregs; i++) { + if (!data->vregs[i].load_uA) + continue; + + ret = regulator_set_load(qca_common->vregs[i].consumer, data->vregs[i].load_uA); + if (ret) + return ret; + } + + qca_common->susclk = devm_clk_get_optional(dev, NULL); + if (IS_ERR(qca_common->susclk)) { + dev_err(dev, "failed to acquire clk\n"); + return PTR_ERR(qca_common->susclk); + } + + qca_common->sw_ctrl = devm_gpiod_get_optional(dev, "swctrl", GPIOD_IN); + if (IS_ERR(qca_common->sw_ctrl)) { + return dev_err_probe(dev, PTR_ERR(qca_common->sw_ctrl), + "failed to acquire SW_CTRL gpio\n"); + } else if (!qca_common->sw_ctrl) + dev_info(dev, "No SW_CTRL gpio\n"); + + return 0; +} + +static void pwrseq_qca_unprepare_susclk(void *data) +{ + struct pwrseq_qca_common *qca_common = data; + + clk_disable_unprepare(qca_common->susclk); +} + +static const struct qca_device_data qca_soc_data_default = { + .num_vregs = 0, + .has_enable_gpios = true, +}; + +static int pwrseq_qca_probe(struct platform_device *pdev) +{ + struct pwrseq_qca *pwrseq_qca; + struct pwrseq *pwrseq; + struct pwrseq_provider *provider; + struct device *dev = &pdev->dev; + struct pwrseq_onecell_data *onecell; + const struct qca_device_data *data; + int ret, i; + + data = device_get_match_data(dev); + if (!data) + data = &qca_soc_data_default; + + pwrseq_qca = devm_kzalloc(dev, struct_size(pwrseq_qca, common.vregs, data->num_vregs), GFP_KERNEL); + if (!pwrseq_qca) + return -ENOMEM; + + onecell = devm_kzalloc(dev, struct_size(onecell, pwrseqs, PWRSEQ_QCA_MAX), GFP_KERNEL); + if (!onecell) + return -ENOMEM; + + ret = pwrseq_qca_common_init(dev, &pwrseq_qca->common, data); + if (ret) + return ret; + + if (data->has_enable_gpios) { + struct gpio_desc *gpiod; + + gpiod = devm_gpiod_get_optional(dev, "wifi-enable", GPIOD_OUT_LOW); + if (IS_ERR(gpiod)) + return dev_err_probe(dev, PTR_ERR(gpiod), "failed to acquire WIFI enable GPIO\n"); + else if (!gpiod) + dev_warn(dev, "No WiFi enable GPIO declared\n"); + + pwrseq_qca->pwrseq_qcas[PWRSEQ_QCA_WIFI].enable = gpiod; + + gpiod = devm_gpiod_get_optional(dev, "bt-enable", GPIOD_OUT_LOW); + if (IS_ERR(gpiod)) + return dev_err_probe(dev, PTR_ERR(gpiod), "failed to acquire BT enable GPIO\n"); + else if (!gpiod) + dev_warn(dev, "No BT enable GPIO declared\n"); + + pwrseq_qca->pwrseq_qcas[PWRSEQ_QCA_BT].enable = gpiod; + } + + /* If we have no control over device's enablement, make sure that sleep clock is always running */ + if (!pwrseq_qca->common.vddio || + !pwrseq_qca->common.num_vregs || + !(pwrseq_qca->pwrseq_qcas[PWRSEQ_QCA_BT].enable && + pwrseq_qca->pwrseq_qcas[PWRSEQ_QCA_WIFI].enable)) { + ret = clk_set_rate(pwrseq_qca->common.susclk, SUSCLK_RATE_32KHZ); + if (ret) + return ret; + + ret = clk_prepare_enable(pwrseq_qca->common.susclk); + if (ret) + return ret; + + ret = devm_add_action_or_reset(dev, pwrseq_qca_unprepare_susclk, &pwrseq_qca->common); + if (ret) + return ret; + } + + for (i = 0; i < PWRSEQ_QCA_MAX; i++) { + pwrseq_qca->pwrseq_qcas[i].common = &pwrseq_qca->common; + + pwrseq = devm_pwrseq_create(dev, &pwrseq_qca_ops); + if (IS_ERR(pwrseq)) + return PTR_ERR(pwrseq); + + pwrseq_set_drvdata(pwrseq, &pwrseq_qca->pwrseq_qcas[i]); + + onecell->pwrseqs[i] = pwrseq; + } + + onecell->num = PWRSEQ_QCA_MAX; + + provider = devm_of_pwrseq_provider_register(dev, of_pwrseq_xlate_onecell, onecell); + + return PTR_ERR_OR_ZERO(provider); +} + +static const struct qca_device_data qca_soc_data_qca6390 = { + .vddio = { "vddio", 20000 }, + .vregs = { + /* 2.0 V */ + { "vddpcie2", 15000 }, + { "vddrfa3", 400000 }, + + /* 0.95 V */ + { "vddaon", 100000 }, + { "vddpmu", 1250000 }, + { "vddrfa1", 200000 }, + + /* 1.35 V */ + { "vddrfa2", 400000 }, + { "vddpcie1", 35000 }, + }, + .num_vregs = 7, + .has_enable_gpios = true, +}; + +/* Shared between wcn3990 and wcn3991 */ +static const struct qca_device_data qca_soc_data_wcn3990 = { + .vddio = { "vddio", 15000 }, + .vregs = { + { "vddxo", 80000 }, + { "vddrf", 300000 }, + { "vddch0", 450000 }, + { "vddch1", 450000 }, + }, + .num_vregs = 4, +}; + +static const struct qca_device_data qca_soc_data_wcn3998 = { + .vddio = { "vddio", 10000 }, + .vregs = { + { "vddxo", 80000 }, + { "vddrf", 300000 }, + { "vddch0", 450000 }, + { "vddch1", 450000 }, + }, + .num_vregs = 4, +}; + +static const struct qca_device_data qca_soc_data_wcn6750 = { + .vddio = { "vddio", 5000 }, + .vregs = { + { "vddaon", 26000 }, + { "vddbtcxmx", 126000 }, + { "vddrfacmn", 12500 }, + { "vddrfa0p8", 102000 }, + { "vddrfa1p7", 302000 }, + { "vddrfa1p2", 257000 }, + { "vddrfa2p2", 1700000 }, + { "vddasd", 200 }, + }, + .num_vregs = 8, + .has_enable_gpios = true, +}; + +static const struct of_device_id pwrseq_qca_of_match[] = { + { .compatible = "qcom,qca6174-pwrseq", }, + { .compatible = "qcom,qca6390-pwrseq", .data = &qca_soc_data_qca6390 }, + { .compatible = "qcom,qca9377-pwrseq" }, + { .compatible = "qcom,wcn3990-pwrseq", .data = &qca_soc_data_wcn3990 }, + { .compatible = "qcom,wcn3991-pwrseq", .data = &qca_soc_data_wcn3990 }, + { .compatible = "qcom,wcn3998-pwrseq", .data = &qca_soc_data_wcn3998 }, + { .compatible = "qcom,wcn6750-pwrseq", .data = &qca_soc_data_wcn6750 }, + { /* sentinel */ }, +}; +MODULE_DEVICE_TABLE(of, pwrseq_qca_of_match); + +static struct platform_driver pwrseq_qca_driver = { + .probe = pwrseq_qca_probe, + .driver = { + .name = "pwrseq_qca", + .of_match_table = pwrseq_qca_of_match, + }, +}; + +module_platform_driver(pwrseq_qca_driver); +MODULE_LICENSE("GPL v2");