diff mbox series

[v4,08/13] drm/msm/disp/dpu1: Don't use DSC with mode_3d

Message ID 20220210063739.233634-9-vkoul@kernel.org
State Superseded
Headers show
Series [v4,01/13] drm/msm/dsi: add support for dsc data | expand

Commit Message

Vinod Koul Feb. 10, 2022, 6:37 a.m. UTC 
We cannot enable mode_3d when we are using the DSC. So pass
configuration to detect DSC is enabled and not enable mode_3d
when we are using DSC

We add a helper dpu_encoder_helper_get_dsc() to detect dsc
enabled and pass this to .setup_intf_cfg()

Signed-off-by: Vinod Koul <vkoul@kernel.org>
---
 drivers/gpu/drm/msm/disp/dpu1/dpu_encoder_phys_cmd.c | 4 ++++
 drivers/gpu/drm/msm/disp/dpu1/dpu_encoder_phys_vid.c | 4 ++++
 drivers/gpu/drm/msm/disp/dpu1/dpu_hw_ctl.c           | 7 ++++++-
 3 files changed, 14 insertions(+), 1 deletion(-)
diff mbox series

Patch

diff --git a/drivers/gpu/drm/msm/disp/dpu1/dpu_encoder_phys_cmd.c b/drivers/gpu/drm/msm/disp/dpu1/dpu_encoder_phys_cmd.c
index 34a6940d12c5..ed37a4c21596 100644
--- a/drivers/gpu/drm/msm/disp/dpu1/dpu_encoder_phys_cmd.c
+++ b/drivers/gpu/drm/msm/disp/dpu1/dpu_encoder_phys_cmd.c
@@ -70,6 +70,10 @@  static void _dpu_encoder_phys_cmd_update_intf_cfg(
 	intf_cfg.intf_mode_sel = DPU_CTL_MODE_SEL_CMD;
 	intf_cfg.stream_sel = cmd_enc->stream_sel;
 	intf_cfg.mode_3d = dpu_encoder_helper_get_3d_blend_mode(phys_enc);
+	intf_cfg.dsc = dpu_encoder_helper_get_dsc(phys_enc);
+	if (intf_cfg.dsc)
+		intf_cfg.mode_3d = 0;
+
 	ctl->ops.setup_intf_cfg(ctl, &intf_cfg);
 }
 
diff --git a/drivers/gpu/drm/msm/disp/dpu1/dpu_encoder_phys_vid.c b/drivers/gpu/drm/msm/disp/dpu1/dpu_encoder_phys_vid.c
index ddd9d89cd456..218009855fca 100644
--- a/drivers/gpu/drm/msm/disp/dpu1/dpu_encoder_phys_vid.c
+++ b/drivers/gpu/drm/msm/disp/dpu1/dpu_encoder_phys_vid.c
@@ -284,6 +284,10 @@  static void dpu_encoder_phys_vid_setup_timing_engine(
 	intf_cfg.intf_mode_sel = DPU_CTL_MODE_SEL_VID;
 	intf_cfg.stream_sel = 0; /* Don't care value for video mode */
 	intf_cfg.mode_3d = dpu_encoder_helper_get_3d_blend_mode(phys_enc);
+	intf_cfg.dsc = dpu_encoder_helper_get_dsc(phys_enc);
+	if (intf_cfg.dsc)
+		intf_cfg.mode_3d = 0;
+
 	if (phys_enc->hw_pp->merge_3d)
 		intf_cfg.merge_3d = phys_enc->hw_pp->merge_3d->idx;
 
diff --git a/drivers/gpu/drm/msm/disp/dpu1/dpu_hw_ctl.c b/drivers/gpu/drm/msm/disp/dpu1/dpu_hw_ctl.c
index 49659165cea8..6d5268b7da90 100644
--- a/drivers/gpu/drm/msm/disp/dpu1/dpu_hw_ctl.c
+++ b/drivers/gpu/drm/msm/disp/dpu1/dpu_hw_ctl.c
@@ -536,7 +536,12 @@  static void dpu_hw_ctl_intf_cfg(struct dpu_hw_ctl *ctx,
 
 	intf_cfg |= (cfg->intf & 0xF) << 4;
 
-	if (cfg->mode_3d) {
+	/* In DSC we can't set merge, so check for dsc and complain */
+	if (cfg->mode_3d && cfg->dsc)
+		pr_err("DPU1: DSC and Merge 3D both are set!! it may not work\n");
+
+	/* set merge only when dsc is not set */
+	if (cfg->mode_3d && !cfg->dsc) {
 		intf_cfg |= BIT(19);
 		intf_cfg |= (cfg->mode_3d - 0x1) << 20;
 	}