diff mbox series

[v4,01/12] arm64: dts: qcom: sdm630: disable dsi0/dsi0_phy by default

Message ID 20220514141041.3158521-2-dmitry.baryshkov@linaro.org
State Superseded
Headers show
Series arm64: dts: qcom: initial Inforce IFC6560 board support | expand

Commit Message

Dmitry Baryshkov May 14, 2022, 2:10 p.m. UTC
Follow the typical practice and keep DSI0/DSI0 PHY disabled by default.
They should be enabled in the board DT files. No existing boards use
them at this moment.

Suggested-by: Marijn Suijten <marijn.suijten@somainline.org>
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
---
 arch/arm64/boot/dts/qcom/sdm630.dtsi | 3 +++
 1 file changed, 3 insertions(+)
diff mbox series

Patch

diff --git a/arch/arm64/boot/dts/qcom/sdm630.dtsi b/arch/arm64/boot/dts/qcom/sdm630.dtsi
index 240293592ef9..8697d40e9b74 100644
--- a/arch/arm64/boot/dts/qcom/sdm630.dtsi
+++ b/arch/arm64/boot/dts/qcom/sdm630.dtsi
@@ -1559,6 +1559,8 @@  dsi0: dsi@c994000 {
 				phys = <&dsi0_phy>;
 				phy-names = "dsi";
 
+				status = "disabled";
+
 				ports {
 					#address-cells = <1>;
 					#size-cells = <0>;
@@ -1592,6 +1594,7 @@  dsi0_phy: dsi-phy@c994400 {
 
 				clocks = <&mmcc MDSS_AHB_CLK>, <&xo_board>;
 				clock-names = "iface", "ref";
+				status = "disabled";
 			};
 		};