diff mbox series

[v3,6/6] arm64: dts: ipq8074: add VQMMC supply

Message ID 20220517205341.536587-6-robimarko@gmail.com
State New
Headers show
Series [v3,1/6] dt-bindings: regulator: qcom,spmi-regulator: Convert to dtschema | expand

Commit Message

Robert Marko May 17, 2022, 8:53 p.m. UTC
SDHCI controller claims DDR, HS200 and HS400 1.8V support, however it
cannot achieve those using the 2.95V I/O that is the default set by
firmware.

Since we know have access to the PMP8074 PMIC provided LDO that provides
the I/O voltage set it as VQMMC supply so that higher speeds can actually
be achieved.

Signed-off-by: Robert Marko <robimarko@gmail.com>
---
 arch/arm64/boot/dts/qcom/ipq8074.dtsi | 2 ++
 1 file changed, 2 insertions(+)
diff mbox series

Patch

diff --git a/arch/arm64/boot/dts/qcom/ipq8074.dtsi b/arch/arm64/boot/dts/qcom/ipq8074.dtsi
index d1a0b77c38a4..fea3c4ee3565 100644
--- a/arch/arm64/boot/dts/qcom/ipq8074.dtsi
+++ b/arch/arm64/boot/dts/qcom/ipq8074.dtsi
@@ -476,6 +476,8 @@  sdhc_1: sdhci@7824900 {
 			mmc-hs400-1_8v;
 			bus-width = <8>;
 
+			vqmmc-supply = <&l11>;
+
 			status = "disabled";
 		};