diff mbox series

[5/5] arm64: dts: qcom: msm8998-xperia: Introduce ToF sensor support

Message ID 20220523175344.5845-6-markuss.broks@gmail.com
State New
Headers show
Series Add support for ToF sensor on Yoshino platform | expand

Commit Message

Markuss Broks May 23, 2022, 5:53 p.m. UTC
This patch adds device tree support for the VL53L0X ToF sensor
found on all Yoshino devices.

Signed-off-by: Markuss Broks <markuss.broks@gmail.com>
---
 .../dts/qcom/msm8998-sony-xperia-yoshino.dtsi | 33 +++++++++++++++++++
 1 file changed, 33 insertions(+)

Comments

Bjorn Andersson July 3, 2022, 3:56 a.m. UTC | #1
On Mon, 23 May 2022 20:53:44 +0300, Markuss Broks wrote:
> This patch adds device tree support for the VL53L0X ToF sensor
> found on all Yoshino devices.
> 
> 

Applied, thanks!

[5/5] arm64: dts: qcom: msm8998-xperia: Introduce ToF sensor support
      commit: 642f13c32087c29ed907866c7e6765d472e8f457

Best regards,
diff mbox series

Patch

diff --git a/arch/arm64/boot/dts/qcom/msm8998-sony-xperia-yoshino.dtsi b/arch/arm64/boot/dts/qcom/msm8998-sony-xperia-yoshino.dtsi
index 47488a1aecae..4bd1039d983d 100644
--- a/arch/arm64/boot/dts/qcom/msm8998-sony-xperia-yoshino.dtsi
+++ b/arch/arm64/boot/dts/qcom/msm8998-sony-xperia-yoshino.dtsi
@@ -245,6 +245,24 @@  &blsp2_uart1 {
 	status = "okay";
 };
 
+&blsp2_i2c2 {
+	status = "okay";
+
+	proximity@29 {
+		compatible = "st,vl53l0x";
+		reg = <0x29>;
+
+		interrupt-parent = <&tlmm>;
+		interrupts = <22 IRQ_TYPE_EDGE_FALLING>;
+
+		reset-gpios = <&tlmm 27 GPIO_ACTIVE_LOW>;
+		vdd-supply = <&cam_vio_vreg>;
+
+		pinctrl-names = "default";
+		pinctrl-0 = <&tof_int &tof_reset>;
+	};
+};
+
 &ibb {
 	regulator-min-microamp = <800000>;
 	regulator-max-microamp = <800000>;
@@ -606,6 +624,14 @@  cam0_vdig_default: cam0-vdig-default {
 		drive-strength = <2>;
 	};
 
+	tof_int: tof-int {
+		pins = "gpio22";
+		function = "gpio";
+		bias-pull-up;
+		drive-strength = <2>;
+		input-enable;
+	};
+
 	cam1_vdig_default: cam1-vdig-default {
 		pins = "gpio25";
 		function = "gpio";
@@ -613,6 +639,13 @@  cam1_vdig_default: cam1-vdig-default {
 		drive-strength = <2>;
 	};
 
+	tof_reset: tof-reset {
+		pins = "gpio27";
+		function = "gpio";
+		bias-disable;
+		drive-strength = <2>;
+	};
+
 	hall_sensor0_default: acc-cover-open {
 		pins = "gpio124";
 		function = "gpio";