diff mbox series

[RFC,16/28] phy: qcom-qmp: move PCS V5 registers to separate headers

Message ID 20220610190925.3670081-17-dmitry.baryshkov@linaro.org
State Superseded
Headers show
Series phy: qcom-qmp: split register tables | expand

Commit Message

Dmitry Baryshkov June 10, 2022, 7:09 p.m. UTC 
Move PCS V5 registers to the separate headers.

Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
---
 .../phy/qualcomm/phy-qcom-qmp-pcs-pcie-v5.h   | 16 +++++
 .../phy/qualcomm/phy-qcom-qmp-pcs-ufs-v5.h    | 27 ++++++++
 .../phy/qualcomm/phy-qcom-qmp-pcs-usb-v5.h    | 36 +++++++++++
 drivers/phy/qualcomm/phy-qcom-qmp-pcs-v5.h    | 17 +++++
 drivers/phy/qualcomm/phy-qcom-qmp.h           | 63 ++-----------------
 5 files changed, 101 insertions(+), 58 deletions(-)
 create mode 100644 drivers/phy/qualcomm/phy-qcom-qmp-pcs-pcie-v5.h
 create mode 100644 drivers/phy/qualcomm/phy-qcom-qmp-pcs-ufs-v5.h
 create mode 100644 drivers/phy/qualcomm/phy-qcom-qmp-pcs-usb-v5.h
 create mode 100644 drivers/phy/qualcomm/phy-qcom-qmp-pcs-v5.h
diff mbox series

Patch

diff --git a/drivers/phy/qualcomm/phy-qcom-qmp-pcs-pcie-v5.h b/drivers/phy/qualcomm/phy-qcom-qmp-pcs-pcie-v5.h
new file mode 100644
index 000000000000..2e19fb3f051e
--- /dev/null
+++ b/drivers/phy/qualcomm/phy-qcom-qmp-pcs-pcie-v5.h
@@ -0,0 +1,16 @@ 
+/* Only for QMP V5 PHY - PCS_PCIE registers */
+/* SPDX-License-Identifier: GPL-2.0 */
+/*
+ * Copyright (c) 2017, The Linux Foundation. All rights reserved.
+ */
+
+#ifndef QCOM_PHY_QMP_PCS_PCIE_V5_H_
+#define QCOM_PHY_QMP_PCS_PCIE_V5_H_
+
+/* Only for QMP V5 PHY - PCS_PCIE registers */
+#define QPHY_V5_PCS_PCIE_ENDPOINT_REFCLK_DRIVE		0x20
+#define QPHY_V5_PCS_PCIE_INT_AUX_CLK_CONFIG1		0x54
+#define QPHY_V5_PCS_PCIE_OSC_DTCT_ACTIONS		0x94
+#define QPHY_V5_PCS_PCIE_EQ_CONFIG2			0xa8
+
+#endif
diff --git a/drivers/phy/qualcomm/phy-qcom-qmp-pcs-ufs-v5.h b/drivers/phy/qualcomm/phy-qcom-qmp-pcs-ufs-v5.h
new file mode 100644
index 000000000000..bcca23493b7e
--- /dev/null
+++ b/drivers/phy/qualcomm/phy-qcom-qmp-pcs-ufs-v5.h
@@ -0,0 +1,27 @@ 
+/* Only for QMP V5 PHY - UFS PCS registers */
+/* SPDX-License-Identifier: GPL-2.0 */
+/*
+ * Copyright (c) 2017, The Linux Foundation. All rights reserved.
+ */
+
+#ifndef QCOM_PHY_QMP_PCS_UFS_V5_H_
+#define QCOM_PHY_QMP_PCS_UFS_V5_H_
+
+/* Only for QMP V5 PHY - UFS PCS registers */
+#define QPHY_V5_PCS_UFS_TIMER_20US_CORECLK_STEPS_MSB	0x00c
+#define QPHY_V5_PCS_UFS_TIMER_20US_CORECLK_STEPS_LSB	0x010
+#define QPHY_V5_PCS_UFS_PLL_CNTL			0x02c
+#define QPHY_V5_PCS_UFS_TX_LARGE_AMP_DRV_LVL		0x030
+#define QPHY_V5_PCS_UFS_TX_SMALL_AMP_DRV_LVL		0x038
+#define QPHY_V5_PCS_UFS_TX_HSGEAR_CAPABILITY		0x074
+#define QPHY_V5_PCS_UFS_RX_HSGEAR_CAPABILITY		0x0b4
+#define QPHY_V5_PCS_UFS_DEBUG_BUS_CLKSEL		0x124
+#define QPHY_V5_PCS_UFS_RX_MIN_HIBERN8_TIME		0x150
+#define QPHY_V5_PCS_UFS_RX_SIGDET_CTRL1			0x154
+#define QPHY_V5_PCS_UFS_RX_SIGDET_CTRL2			0x158
+#define QPHY_V5_PCS_UFS_TX_PWM_GEAR_BAND		0x160
+#define QPHY_V5_PCS_UFS_TX_HS_GEAR_BAND			0x168
+#define QPHY_V5_PCS_UFS_TX_MID_TERM_CTRL1		0x1d8
+#define QPHY_V5_PCS_UFS_MULTI_LANE_CTRL1		0x1e0
+
+#endif
diff --git a/drivers/phy/qualcomm/phy-qcom-qmp-pcs-usb-v5.h b/drivers/phy/qualcomm/phy-qcom-qmp-pcs-usb-v5.h
new file mode 100644
index 000000000000..73de626223ed
--- /dev/null
+++ b/drivers/phy/qualcomm/phy-qcom-qmp-pcs-usb-v5.h
@@ -0,0 +1,36 @@ 
+/* SPDX-License-Identifier: GPL-2.0 */
+/*
+ * Copyright (c) 2017, The Linux Foundation. All rights reserved.
+ */
+
+#ifndef QCOM_PHY_QMP_PCS_USB_V5_H_
+#define QCOM_PHY_QMP_PCS_USB_V5_H_
+
+/* Only for QMP V5 PHY - USB3 have different offsets than V4 */
+#define QPHY_V5_PCS_USB3_POWER_STATE_CONFIG1		0x000
+#define QPHY_V5_PCS_USB3_AUTONOMOUS_MODE_STATUS		0x004
+#define QPHY_V5_PCS_USB3_AUTONOMOUS_MODE_CTRL		0x008
+#define QPHY_V5_PCS_USB3_AUTONOMOUS_MODE_CTRL2		0x00c
+#define QPHY_V5_PCS_USB3_LFPS_RXTERM_IRQ_SOURCE_STATUS	0x010
+#define QPHY_V5_PCS_USB3_LFPS_RXTERM_IRQ_CLEAR		0x014
+#define QPHY_V5_PCS_USB3_LFPS_DET_HIGH_COUNT_VAL	0x018
+#define QPHY_V5_PCS_USB3_LFPS_TX_ECSTART		0x01c
+#define QPHY_V5_PCS_USB3_LFPS_PER_TIMER_VAL		0x020
+#define QPHY_V5_PCS_USB3_LFPS_TX_END_CNT_U3_START	0x024
+#define QPHY_V5_PCS_USB3_LFPS_CONFIG1			0x028
+#define QPHY_V5_PCS_USB3_RXEQTRAINING_LOCK_TIME		0x02c
+#define QPHY_V5_PCS_USB3_RXEQTRAINING_WAIT_TIME		0x030
+#define QPHY_V5_PCS_USB3_RXEQTRAINING_CTLE_TIME		0x034
+#define QPHY_V5_PCS_USB3_RXEQTRAINING_WAIT_TIME_S2	0x038
+#define QPHY_V5_PCS_USB3_RXEQTRAINING_DFE_TIME_S2	0x03c
+#define QPHY_V5_PCS_USB3_RCVR_DTCT_DLY_U3_L		0x040
+#define QPHY_V5_PCS_USB3_RCVR_DTCT_DLY_U3_H		0x044
+#define QPHY_V5_PCS_USB3_ARCVR_DTCT_EN_PERIOD		0x048
+#define QPHY_V5_PCS_USB3_ARCVR_DTCT_CM_DLY		0x04c
+#define QPHY_V5_PCS_USB3_TXONESZEROS_RUN_LENGTH		0x050
+#define QPHY_V5_PCS_USB3_ALFPS_DEGLITCH_VAL		0x054
+#define QPHY_V5_PCS_USB3_SIGDET_STARTUP_TIMER_VAL	0x058
+#define QPHY_V5_PCS_USB3_TEST_CONTROL			0x05c
+#define QPHY_V5_PCS_USB3_RXTERMINATION_DLY_SEL		0x060
+
+#endif
diff --git a/drivers/phy/qualcomm/phy-qcom-qmp-pcs-v5.h b/drivers/phy/qualcomm/phy-qcom-qmp-pcs-v5.h
new file mode 100644
index 000000000000..61a44519f969
--- /dev/null
+++ b/drivers/phy/qualcomm/phy-qcom-qmp-pcs-v5.h
@@ -0,0 +1,17 @@ 
+/* SPDX-License-Identifier: GPL-2.0 */
+/*
+ * Copyright (c) 2017, The Linux Foundation. All rights reserved.
+ */
+
+#ifndef QCOM_PHY_QMP_PCS_V5_H_
+#define QCOM_PHY_QMP_PCS_V5_H_
+
+/* Only for QMP V5 PHY - USB/PCIe PCS registers */
+#define QPHY_V5_PCS_REFGEN_REQ_CONFIG1			0x0dc
+#define QPHY_V5_PCS_G3S2_PRE_GAIN			0x170
+#define QPHY_V5_PCS_RX_SIGDET_LVL			0x188
+#define QPHY_V5_PCS_RATE_SLEW_CNTRL1			0x198
+#define QPHY_V5_PCS_EQ_CONFIG2				0x1e0
+#define QPHY_V5_PCS_EQ_CONFIG3				0x1e4
+
+#endif
diff --git a/drivers/phy/qualcomm/phy-qcom-qmp.h b/drivers/phy/qualcomm/phy-qcom-qmp.h
index 05da0725df71..9d93ae785b16 100644
--- a/drivers/phy/qualcomm/phy-qcom-qmp.h
+++ b/drivers/phy/qualcomm/phy-qcom-qmp.h
@@ -30,6 +30,11 @@ 
 #include "phy-qcom-qmp-pcs-usb-v4.h"
 #include "phy-qcom-qmp-pcs-ufs-v4.h"
 
+#include "phy-qcom-qmp-pcs-v5.h"
+#include "phy-qcom-qmp-pcs-pcie-v5.h"
+#include "phy-qcom-qmp-pcs-usb-v5.h"
+#include "phy-qcom-qmp-pcs-ufs-v5.h"
+
 /* Only for QMP V3 & V4 PHY - DP COM registers */
 #define QPHY_V3_DP_COM_PHY_MODE_CTRL			0x00
 #define QPHY_V3_DP_COM_SW_RESET				0x04
@@ -334,20 +339,6 @@ 
 #define QSERDES_V5_20_RX_RX_MARG_COARSE_THRESH5_RATE3	0x218
 #define QSERDES_V5_20_RX_RX_MARG_COARSE_THRESH6_RATE3	0x220
 
-/* Only for QMP V5 PHY - USB/PCIe PCS registers */
-#define QPHY_V5_PCS_REFGEN_REQ_CONFIG1			0x0dc
-#define QPHY_V5_PCS_G3S2_PRE_GAIN			0x170
-#define QPHY_V5_PCS_RX_SIGDET_LVL			0x188
-#define QPHY_V5_PCS_RATE_SLEW_CNTRL1			0x198
-#define QPHY_V5_PCS_EQ_CONFIG2				0x1e0
-#define QPHY_V5_PCS_EQ_CONFIG3				0x1e4
-
-/* Only for QMP V5 PHY - PCS_PCIE registers */
-#define QPHY_V5_PCS_PCIE_ENDPOINT_REFCLK_DRIVE		0x20
-#define QPHY_V5_PCS_PCIE_INT_AUX_CLK_CONFIG1		0x54
-#define QPHY_V5_PCS_PCIE_OSC_DTCT_ACTIONS		0x94
-#define QPHY_V5_PCS_PCIE_EQ_CONFIG2			0xa8
-
 /* Only for QMP V5_20 PHY - PCIe PCS registers */
 #define QPHY_V5_20_PCS_PCIE_ENDPOINT_REFCLK_DRIVE	0x01c
 #define QPHY_V5_20_PCS_PCIE_OSC_DTCT_ACTIONS		0x090
@@ -356,48 +347,4 @@ 
 #define QPHY_V5_20_PCS_PCIE_G4_PRE_GAIN			0x15c
 #define QPHY_V5_20_PCS_PCIE_RX_MARGINING_CONFIG3	0x184
 
-/* Only for QMP V5 PHY - UFS PCS registers */
-#define QPHY_V5_PCS_UFS_TIMER_20US_CORECLK_STEPS_MSB	0x00c
-#define QPHY_V5_PCS_UFS_TIMER_20US_CORECLK_STEPS_LSB	0x010
-#define QPHY_V5_PCS_UFS_PLL_CNTL			0x02c
-#define QPHY_V5_PCS_UFS_TX_LARGE_AMP_DRV_LVL		0x030
-#define QPHY_V5_PCS_UFS_TX_SMALL_AMP_DRV_LVL		0x038
-#define QPHY_V5_PCS_UFS_TX_HSGEAR_CAPABILITY		0x074
-#define QPHY_V5_PCS_UFS_RX_HSGEAR_CAPABILITY		0x0b4
-#define QPHY_V5_PCS_UFS_DEBUG_BUS_CLKSEL		0x124
-#define QPHY_V5_PCS_UFS_RX_MIN_HIBERN8_TIME		0x150
-#define QPHY_V5_PCS_UFS_RX_SIGDET_CTRL1			0x154
-#define QPHY_V5_PCS_UFS_RX_SIGDET_CTRL2			0x158
-#define QPHY_V5_PCS_UFS_TX_PWM_GEAR_BAND		0x160
-#define QPHY_V5_PCS_UFS_TX_HS_GEAR_BAND			0x168
-#define QPHY_V5_PCS_UFS_TX_MID_TERM_CTRL1		0x1d8
-#define QPHY_V5_PCS_UFS_MULTI_LANE_CTRL1		0x1e0
-
-/* Only for QMP V5 PHY - USB3 have different offsets than V4 */
-#define QPHY_V5_PCS_USB3_POWER_STATE_CONFIG1		0x000
-#define QPHY_V5_PCS_USB3_AUTONOMOUS_MODE_STATUS		0x004
-#define QPHY_V5_PCS_USB3_AUTONOMOUS_MODE_CTRL		0x008
-#define QPHY_V5_PCS_USB3_AUTONOMOUS_MODE_CTRL2		0x00c
-#define QPHY_V5_PCS_USB3_LFPS_RXTERM_IRQ_SOURCE_STATUS	0x010
-#define QPHY_V5_PCS_USB3_LFPS_RXTERM_IRQ_CLEAR		0x014
-#define QPHY_V5_PCS_USB3_LFPS_DET_HIGH_COUNT_VAL	0x018
-#define QPHY_V5_PCS_USB3_LFPS_TX_ECSTART		0x01c
-#define QPHY_V5_PCS_USB3_LFPS_PER_TIMER_VAL		0x020
-#define QPHY_V5_PCS_USB3_LFPS_TX_END_CNT_U3_START	0x024
-#define QPHY_V5_PCS_USB3_LFPS_CONFIG1			0x028
-#define QPHY_V5_PCS_USB3_RXEQTRAINING_LOCK_TIME		0x02c
-#define QPHY_V5_PCS_USB3_RXEQTRAINING_WAIT_TIME		0x030
-#define QPHY_V5_PCS_USB3_RXEQTRAINING_CTLE_TIME		0x034
-#define QPHY_V5_PCS_USB3_RXEQTRAINING_WAIT_TIME_S2	0x038
-#define QPHY_V5_PCS_USB3_RXEQTRAINING_DFE_TIME_S2	0x03c
-#define QPHY_V5_PCS_USB3_RCVR_DTCT_DLY_U3_L		0x040
-#define QPHY_V5_PCS_USB3_RCVR_DTCT_DLY_U3_H		0x044
-#define QPHY_V5_PCS_USB3_ARCVR_DTCT_EN_PERIOD		0x048
-#define QPHY_V5_PCS_USB3_ARCVR_DTCT_CM_DLY		0x04c
-#define QPHY_V5_PCS_USB3_TXONESZEROS_RUN_LENGTH		0x050
-#define QPHY_V5_PCS_USB3_ALFPS_DEGLITCH_VAL		0x054
-#define QPHY_V5_PCS_USB3_SIGDET_STARTUP_TIMER_VAL	0x058
-#define QPHY_V5_PCS_USB3_TEST_CONTROL			0x05c
-#define QPHY_V5_PCS_USB3_RXTERMINATION_DLY_SEL		0x060
-
 #endif