diff mbox series

[v7,4/4] arm64: dts: qcom: sdm845: Add CPU BWMON

Message ID 20220630130541.563001-5-krzysztof.kozlowski@linaro.org
State Superseded
Headers show
Series soc/arm64: qcom: Add initial version of bwmon | expand

Commit Message

Krzysztof Kozlowski June 30, 2022, 1:05 p.m. UTC
Add device node for CPU-memory BWMON device (bandwidth monitoring) on
SDM845 measuring bandwidth between CPU (gladiator_noc) and Last Level
Cache (memnoc).  Usage of this BWMON allows to remove fixed bandwidth
votes from cpufreq (CPU nodes) thus achieve high memory throughput even
with lower CPU frequencies.

Co-developed-by: Thara Gopinath <thara.gopinath@gmail.com>
Signed-off-by: Thara Gopinath <thara.gopinath@gmail.com>
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
---
 arch/arm64/boot/dts/qcom/sdm845.dtsi | 37 ++++++++++++++++++++++++++++
 1 file changed, 37 insertions(+)
diff mbox series

Patch

diff --git a/arch/arm64/boot/dts/qcom/sdm845.dtsi b/arch/arm64/boot/dts/qcom/sdm845.dtsi
index 83e8b63f0910..1872fea04785 100644
--- a/arch/arm64/boot/dts/qcom/sdm845.dtsi
+++ b/arch/arm64/boot/dts/qcom/sdm845.dtsi
@@ -2026,6 +2026,43 @@  llcc: system-cache-controller@1100000 {
 			interrupts = <GIC_SPI 582 IRQ_TYPE_LEVEL_HIGH>;
 		};
 
+		pmu@1436400 {
+			compatible = "qcom,sdm845-llcc-bwmon", "qcom,msm8998-llcc-bwmon";
+			reg = <0 0x01436400 0 0x600>;
+			interrupts = <GIC_SPI 581 IRQ_TYPE_LEVEL_HIGH>;
+			interconnects = <&gladiator_noc MASTER_APPSS_PROC 3 &mem_noc SLAVE_LLCC 3>;
+
+			operating-points-v2 = <&llcc_bwmon_opp_table>;
+
+			llcc_bwmon_opp_table: opp-table {
+				compatible = "operating-points-v2";
+
+				/*
+				 * The interconnect path bandwidth taken from
+				 * cpu4_opp_table bandwidth for OSM L3
+				 * interconnect.  This also matches the OSM L3
+				 * from bandwidth table of qcom,cpu4-l3lat-mon
+				 * (qcom,core-dev-table, bus width: 16 bytes)
+				 * from msm-4.9 downstream kernel.
+				 */
+				opp-0 {
+					opp-peak-kBps = <4800000>;
+				};
+				opp-1 {
+					opp-peak-kBps = <9216000>;
+				};
+				opp-2 {
+					opp-peak-kBps = <15052800>;
+				};
+				opp-3 {
+					opp-peak-kBps = <20889600>;
+				};
+				opp-4 {
+					opp-peak-kBps = <25497600>;
+				};
+			};
+		};
+
 		pcie0: pci@1c00000 {
 			compatible = "qcom,pcie-sdm845";
 			reg = <0 0x01c00000 0 0x2000>,