@@ -590,7 +590,7 @@ pcie_phy: phy@34000 {
reg = <0x00034000 0x488>;
#address-cells = <1>;
#size-cells = <1>;
- ranges;
+ ranges = <0x0 0x00034000 0x4000>;
clocks = <&gcc GCC_PCIE_PHY_AUX_CLK>,
<&gcc GCC_PCIE_PHY_CFG_AHB_CLK>,
@@ -603,10 +603,10 @@ pcie_phy: phy@34000 {
reset-names = "phy", "common", "cfg";
status = "disabled";
- pciephy_0: phy@35000 {
- reg = <0x00035000 0x130>,
- <0x00035200 0x200>,
- <0x00035400 0x1dc>;
+ pciephy_0: phy@1000 {
+ reg = <0x1000 0x130>,
+ <0x1200 0x200>,
+ <0x1400 0x1dc>;
#phy-cells = <0>;
#clock-cells = <0>;
@@ -617,10 +617,10 @@ pciephy_0: phy@35000 {
reset-names = "lane0";
};
- pciephy_1: phy@36000 {
- reg = <0x00036000 0x130>,
- <0x00036200 0x200>,
- <0x00036400 0x1dc>;
+ pciephy_1: phy@2000 {
+ reg = <0x2000 0x130>,
+ <0x2200 0x200>,
+ <0x2400 0x1dc>;
#phy-cells = <0>;
#clock-cells = <0>;
@@ -631,10 +631,10 @@ pciephy_1: phy@36000 {
reset-names = "lane1";
};
- pciephy_2: phy@37000 {
- reg = <0x00037000 0x130>,
- <0x00037200 0x200>,
- <0x00037400 0x1dc>;
+ pciephy_2: phy@3000 {
+ reg = <0x3000 0x130>,
+ <0x3200 0x200>,
+ <0x3400 0x1dc>;
#phy-cells = <0>;
#clock-cells = <0>;
Clean up the PCIe PHY nodes by using a non-empty ranges property. Signed-off-by: Johan Hovold <johan+linaro@kernel.org> --- arch/arm64/boot/dts/qcom/msm8996.dtsi | 26 +++++++++++++------------- 1 file changed, 13 insertions(+), 13 deletions(-)