diff mbox series

[v3,14/15] ARM: dts: qcom: apq8084: switch TCSR mutex to MMIO

Message ID 20220909092035.223915-15-krzysztof.kozlowski@linaro.org
State Accepted
Commit 16ae4e557b2fa9fc7372b4503247aca80a476272
Headers show
Series ARM/hwlock: qcom: switch TCSR mutex to MMIO | expand

Commit Message

Krzysztof Kozlowski Sept. 9, 2022, 9:20 a.m. UTC
The TCSR mutex bindings allow device to be described only with address
space (so it uses MMIO, not syscon regmap).  This seems reasonable as
TCSR mutex is actually a dedicated IO address space and it also fixes DT
schema checks:

  qcom-apq8084-mtp.dtb: hwlock: 'reg' is a required property
  qcom-apq8084-mtp.dtb: hwlock: 'syscon' does not match any of the regexes: 'pinctrl-[0-9]+'

Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
---
 arch/arm/boot/dts/qcom-apq8084.dtsi | 11 +++--------
 1 file changed, 3 insertions(+), 8 deletions(-)
diff mbox series

Patch

diff --git a/arch/arm/boot/dts/qcom-apq8084.dtsi b/arch/arm/boot/dts/qcom-apq8084.dtsi
index 72f9255855a1..5e07255fe5ea 100644
--- a/arch/arm/boot/dts/qcom-apq8084.dtsi
+++ b/arch/arm/boot/dts/qcom-apq8084.dtsi
@@ -383,14 +383,9 @@  gcc: clock-controller@fc400000 {
 			reg = <0xfc400000 0x4000>;
 		};
 
-		tcsr_mutex_regs: syscon@fd484000 {
-			compatible = "syscon";
-			reg = <0xfd484000 0x2000>;
-		};
-
-		tcsr_mutex: hwlock {
-			compatible = "qcom,tcsr-mutex";
-			syscon = <&tcsr_mutex_regs 0 0x80>;
+		tcsr_mutex: hwlock@fd484000 {
+			compatible = "qcom,apq8084-tcsr-mutex", "qcom,tcsr-mutex";
+			reg = <0xfd484000 0x1000>;
 			#hwlock-cells = <1>;
 		};