@@ -388,21 +388,37 @@ timer@200a000 {
acc0: clock-controller@2088000 {
compatible = "qcom,kpss-acc-v1";
reg = <0x02088000 0x1000>, <0x02008000 0x1000>;
+ clocks = <&gcc PLL8_VOTE>, <&pxo_board>;
+ clock-names = "pll8_vote", "pxo";
+ clock-output-names = "acpu0_aux";
+ #clock-cells = <0>;
};
acc1: clock-controller@2098000 {
compatible = "qcom,kpss-acc-v1";
reg = <0x02098000 0x1000>, <0x02008000 0x1000>;
+ clocks = <&gcc PLL8_VOTE>, <&pxo_board>;
+ clock-names = "pll8_vote", "pxo";
+ clock-output-names = "acpu1_aux";
+ #clock-cells = <0>;
};
acc2: clock-controller@20a8000 {
compatible = "qcom,kpss-acc-v1";
reg = <0x020a8000 0x1000>, <0x02008000 0x1000>;
+ clocks = <&gcc PLL8_VOTE>, <&pxo_board>;
+ clock-names = "pll8_vote", "pxo";
+ clock-output-names = "acpu2_aux";
+ #clock-cells = <0>;
};
acc3: clock-controller@20b8000 {
compatible = "qcom,kpss-acc-v1";
reg = <0x020b8000 0x1000>, <0x02008000 0x1000>;
+ clocks = <&gcc PLL8_VOTE>, <&pxo_board>;
+ clock-names = "pll8_vote", "pxo";
+ clock-output-names = "acpu3_aux";
+ #clock-cells = <0>;
};
saw0: power-controller@2089000 {
@@ -503,11 +503,19 @@ IRQ_TYPE_EDGE_RISING)>,
acc0: clock-controller@2088000 {
compatible = "qcom,kpss-acc-v1";
reg = <0x02088000 0x1000>, <0x02008000 0x1000>;
+ clocks = <&gcc PLL8_VOTE>, <&pxo_board>;
+ clock-names = "pll8_vote", "pxo";
+ clock-output-names = "acpu0_aux";
+ #clock-cells = <0>;
};
acc1: clock-controller@2098000 {
compatible = "qcom,kpss-acc-v1";
reg = <0x02098000 0x1000>, <0x02008000 0x1000>;
+ clocks = <&gcc PLL8_VOTE>, <&pxo_board>;
+ clock-names = "pll8_vote", "pxo";
+ clock-output-names = "acpu1_aux";
+ #clock-cells = <0>;
};
adm_dma: dma-controller@18300000 {
@@ -173,11 +173,19 @@ regulators {
acc0: clock-controller@2088000 {
compatible = "qcom,kpss-acc-v1";
reg = <0x02088000 0x1000>, <0x02008000 0x1000>;
+ clocks = <&gcc PLL8_VOTE>, <&pxo_board>;
+ clock-names = "pll8_vote", "pxo";
+ clock-output-names = "acpu0_aux";
+ #clock-cells = <0>;
};
acc1: clock-controller@2098000 {
compatible = "qcom,kpss-acc-v1";
reg = <0x02098000 0x1000>, <0x02008000 0x1000>;
+ clocks = <&gcc PLL8_VOTE>, <&pxo_board>;
+ clock-names = "pll8_vote", "pxo";
+ clock-output-names = "acpu1_aux";
+ #clock-cells = <0>;
};
saw0: regulator@2089000 {
Fix dtbs_check warning now that we have a correct kpss-acc yaml schema. Add missing clocks, clock-names, clock-output-names and #clock-cells bindings for each kpss-acc-v1 clock-controller. Signed-off-by: Christian Marangi <ansuelsmth@gmail.com> --- arch/arm/boot/dts/qcom-apq8064.dtsi | 16 ++++++++++++++++ arch/arm/boot/dts/qcom-ipq8064.dtsi | 8 ++++++++ arch/arm/boot/dts/qcom-msm8960.dtsi | 8 ++++++++ 3 files changed, 32 insertions(+)