diff mbox series

[v4,5/6] PCI: qcom: Setup PHY to work in RC mode

Message ID 20220924160302.285875-6-dmitry.baryshkov@linaro.org
State Superseded
Headers show
Series PCI: qcom: Support using the same PHY for both RC and EP | expand

Commit Message

Dmitry Baryshkov Sept. 24, 2022, 4:03 p.m. UTC
Call phy_set_mode_ext() to notify the PHY driver that the PHY is being
used in the RC mode.

Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
---
 drivers/pci/controller/dwc/pcie-qcom.c | 5 +++++
 1 file changed, 5 insertions(+)

Comments

Han Jingoo Sept. 24, 2022, 11:54 p.m. UTC | #1
On Sat, Sep 24, 2022 Dmitry Baryshkov <dmitry.baryshkov@linaro.org> wrote:
>
> Call phy_set_mode_ext() to notify the PHY driver that the PHY is being
> used in the RC mode.
>
> Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>

Reviewed-by: Jingoo Han <jingoohan1@gmail.com>

Best regards,
Jingoo Han


> ---
>  drivers/pci/controller/dwc/pcie-qcom.c | 5 +++++
>  1 file changed, 5 insertions(+)
>
> diff --git a/drivers/pci/controller/dwc/pcie-qcom.c b/drivers/pci/controller/dwc/pcie-qcom.c
> index 66886dc6e777..1027281bd6ff 100644
> --- a/drivers/pci/controller/dwc/pcie-qcom.c
> +++ b/drivers/pci/controller/dwc/pcie-qcom.c
> @@ -22,6 +22,7 @@
>  #include <linux/pci.h>
>  #include <linux/pm_runtime.h>
>  #include <linux/platform_device.h>
> +#include <linux/phy/pcie.h>
>  #include <linux/phy/phy.h>
>  #include <linux/regulator/consumer.h>
>  #include <linux/reset.h>
> @@ -1494,6 +1495,10 @@ static int qcom_pcie_host_init(struct dw_pcie_rp *pp)
>         if (ret)
>                 return ret;
>
> +       ret = phy_set_mode_ext(pcie->phy, PHY_MODE_PCIE, PHY_MODE_PCIE_RC);
> +       if (ret)
> +               goto err_deinit;
> +
>         ret = phy_power_on(pcie->phy);
>         if (ret)
>                 goto err_deinit;
> --
> 2.35.1
>
diff mbox series

Patch

diff --git a/drivers/pci/controller/dwc/pcie-qcom.c b/drivers/pci/controller/dwc/pcie-qcom.c
index 66886dc6e777..1027281bd6ff 100644
--- a/drivers/pci/controller/dwc/pcie-qcom.c
+++ b/drivers/pci/controller/dwc/pcie-qcom.c
@@ -22,6 +22,7 @@ 
 #include <linux/pci.h>
 #include <linux/pm_runtime.h>
 #include <linux/platform_device.h>
+#include <linux/phy/pcie.h>
 #include <linux/phy/phy.h>
 #include <linux/regulator/consumer.h>
 #include <linux/reset.h>
@@ -1494,6 +1495,10 @@  static int qcom_pcie_host_init(struct dw_pcie_rp *pp)
 	if (ret)
 		return ret;
 
+	ret = phy_set_mode_ext(pcie->phy, PHY_MODE_PCIE, PHY_MODE_PCIE_RC);
+	if (ret)
+		goto err_deinit;
+
 	ret = phy_power_on(pcie->phy);
 	if (ret)
 		goto err_deinit;