@@ -2388,8 +2388,8 @@ lpass_tlmm: pinctrl@33c0000{
<&q6afecc LPASS_HW_DCODEC_VOTE LPASS_CLK_ATTRIBUTE_COUPLE_NO>;
clock-names = "core", "audio";
- wsa_swr_active: wsa-swr-active-pins {
- clk {
+ wsa_swr_active: wsa-swr-active-state {
+ clk-pins {
pins = "gpio10";
function = "wsa_swr_clk";
drive-strength = <2>;
@@ -2397,7 +2397,7 @@ clk {
bias-disable;
};
- data {
+ data-pins {
pins = "gpio11";
function = "wsa_swr_data";
drive-strength = <2>;
@@ -2407,8 +2407,8 @@ data {
};
};
- wsa_swr_sleep: wsa-swr-sleep-pins {
- clk {
+ wsa_swr_sleep: wsa-swr-sleep-state {
+ clk-pins {
pins = "gpio10";
function = "wsa_swr_clk";
drive-strength = <2>;
@@ -2416,7 +2416,7 @@ clk {
bias-pull-down;
};
- data {
+ data-pins {
pins = "gpio11";
function = "wsa_swr_data";
drive-strength = <2>;
@@ -2426,14 +2426,14 @@ data {
};
};
- dmic01_active: dmic01-active-pins {
- clk {
+ dmic01_active: dmic01-active-state {
+ clk-pins {
pins = "gpio6";
function = "dmic1_clk";
drive-strength = <8>;
output-high;
};
- data {
+ data-pins {
pins = "gpio7";
function = "dmic1_data";
drive-strength = <8>;
@@ -2441,8 +2441,8 @@ data {
};
};
- dmic01_sleep: dmic01-sleep-pins {
- clk {
+ dmic01_sleep: dmic01-sleep-state {
+ clk-pins {
pins = "gpio6";
function = "dmic1_clk";
drive-strength = <2>;
@@ -2450,7 +2450,7 @@ clk {
output-low;
};
- data {
+ data-pins {
pins = "gpio7";
function = "dmic1_data";
drive-strength = <2>;
@@ -2459,8 +2459,8 @@ data {
};
};
- rx_swr_active: rx_swr-active-pins {
- clk {
+ rx_swr_active: rx-swr-active-state {
+ clk-pins {
pins = "gpio3";
function = "swr_rx_clk";
drive-strength = <2>;
@@ -2468,7 +2468,7 @@ clk {
bias-disable;
};
- data {
+ data-pins {
pins = "gpio4", "gpio5";
function = "swr_rx_data";
drive-strength = <2>;
@@ -2477,8 +2477,8 @@ data {
};
};
- tx_swr_active: tx_swr-active-pins {
- clk {
+ tx_swr_active: tx-swr-active-state {
+ clk-pins {
pins = "gpio0";
function = "swr_tx_clk";
drive-strength = <2>;
@@ -2486,7 +2486,7 @@ clk {
bias-disable;
};
- data {
+ data-pins {
pins = "gpio1", "gpio2";
function = "swr_tx_data";
drive-strength = <2>;
@@ -2495,8 +2495,8 @@ data {
};
};
- tx_swr_sleep: tx_swr-sleep-pins {
- clk {
+ tx_swr_sleep: tx-swr-sleep-state {
+ clk-pins {
pins = "gpio0";
function = "swr_tx_clk";
drive-strength = <2>;
@@ -2504,7 +2504,7 @@ clk {
bias-pull-down;
};
- data1 {
+ data1-pins {
pins = "gpio1";
function = "swr_tx_data";
drive-strength = <2>;
@@ -2512,7 +2512,7 @@ data1 {
bias-bus-hold;
};
- data2 {
+ data2-pins {
pins = "gpio2";
function = "swr_tx_data";
drive-strength = <2>;
DT schema expects LPASS pin configuration nodes to be named with '-state' suffix and their optional children with '-pins' suffix. Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org> --- arch/arm64/boot/dts/qcom/sm8250.dtsi | 44 ++++++++++++++-------------- 1 file changed, 22 insertions(+), 22 deletions(-)