diff mbox series

[v5,3/3] arm64: dts: qcom: Add touchscreen and touchpad support for evoker

Message ID 20220930153538.v5.3.I50d04dcbe735dda69995cf1078824d671501869e@changeid
State New
Headers show
Series Add LTE SKU for sc7280-evoker family | expand

Commit Message

Sheng-Liang Pan Sept. 30, 2022, 7:37 a.m. UTC 
Change touchpad and touchscreen node for evoker
Touchpad: SA461D-1011
Touchscreen: GT7986U

Signed-off-by: Sheng-Liang Pan <sheng-liang.pan@quanta.corp-partner.google.com>
---

(no changes since v1)

 .../boot/dts/qcom/sc7280-herobrine-evoker.dtsi  | 17 +++++++----------
 1 file changed, 7 insertions(+), 10 deletions(-)
diff mbox series

Patch

diff --git a/arch/arm64/boot/dts/qcom/sc7280-herobrine-evoker.dtsi b/arch/arm64/boot/dts/qcom/sc7280-herobrine-evoker.dtsi
index e78072159d54b..c26f19371c8bc 100644
--- a/arch/arm64/boot/dts/qcom/sc7280-herobrine-evoker.dtsi
+++ b/arch/arm64/boot/dts/qcom/sc7280-herobrine-evoker.dtsi
@@ -23,16 +23,15 @@  ap_tp_i2c: &i2c0 {
 	status = "okay";
 	clock-frequency = <400000>;
 
-	trackpad: trackpad@2c {
-		compatible = "hid-over-i2c";
-		reg = <0x2c>;
+	trackpad: trackpad@15 {
+		compatible = "elan,ekth3000";
+		reg = <0x15>;
 		pinctrl-names = "default";
 		pinctrl-0 = <&tp_int_odl>;
 
 		interrupt-parent = <&tlmm>;
 		interrupts = <7 IRQ_TYPE_EDGE_FALLING>;
 
-		hid-descr-addr = <0x20>;
 		vcc-supply = <&pp3300_z1>;
 
 		wakeup-source;
@@ -43,18 +42,16 @@  ts_i2c: &i2c13 {
 	status = "okay";
 	clock-frequency = <400000>;
 
-	ap_ts: touchscreen@10 {
-		compatible = "elan,ekth6915";
-		reg = <0x10>;
-		pinctrl-names = "default";
-		pinctrl-0 = <&ts_int_conn>, <&ts_rst_conn>;
+	touchscreen: touchscreen@5d {
+		compatible = "goodix,gt7375p";
+		reg = <0x5d>;
 
 		interrupt-parent = <&tlmm>;
 		interrupts = <55 IRQ_TYPE_LEVEL_LOW>;
 
 		reset-gpios = <&tlmm 54 GPIO_ACTIVE_LOW>;
 
-		vcc33-supply = <&ts_avdd>;
+		vdd-supply = <&ts_avdd>;
 	};
 };