diff mbox series

[v5,3/3] arm64: dts: qcom: introduce sa8540p-ride dts

Message ID 20221003125444.12975-5-quic_ppareek@quicinc.com
State New
Headers show
Series arm64: dts: qcom: add dts for sa8540p-ride board | expand

Commit Message

Parikshit Pareek Oct. 3, 2022, 12:54 p.m. UTC 
Create new dts file specific for Qdrive-3 board based on sa8540p chipset.
Introduce common dtsi file sa8295p-adp.dtsi, to be included for ADP and
Qdrive-3 board.

This is quite similar to sa8295 ADP development board. Main differences
are related to connectors, and interface cards, like USB external ports,
ethernet-switch, PCIe switch etc.

Signed-off-by: Parikshit Pareek <quic_ppareek@quicinc.com>
---
 arch/arm64/boot/dts/qcom/Makefile             |  1 +
 arch/arm64/boot/dts/qcom/sa8540p-adp-ride.dts | 72 +++++++++++++++++++
 2 files changed, 73 insertions(+)
 create mode 100644 arch/arm64/boot/dts/qcom/sa8540p-adp-ride.dts
diff mbox series

Patch

diff --git a/arch/arm64/boot/dts/qcom/Makefile b/arch/arm64/boot/dts/qcom/Makefile
index d7669a7cee9f..c68a9cac9b2b 100644
--- a/arch/arm64/boot/dts/qcom/Makefile
+++ b/arch/arm64/boot/dts/qcom/Makefile
@@ -54,6 +54,7 @@  dtb-$(CONFIG_ARCH_QCOM)	+= qcs404-evb-4000.dtb
 dtb-$(CONFIG_ARCH_QCOM)	+= qrb5165-rb5.dtb
 dtb-$(CONFIG_ARCH_QCOM)	+= sa8155p-adp.dtb
 dtb-$(CONFIG_ARCH_QCOM)	+= sa8295p-adp.dtb
+dtb-$(CONFIG_ARCH_QCOM)	+= sa8540p-adp-ride.dtb
 dtb-$(CONFIG_ARCH_QCOM)	+= sc7180-idp.dtb
 dtb-$(CONFIG_ARCH_QCOM)	+= sc7180-trogdor-coachz-r1.dtb
 dtb-$(CONFIG_ARCH_QCOM)	+= sc7180-trogdor-coachz-r1-lte.dtb
diff --git a/arch/arm64/boot/dts/qcom/sa8540p-adp-ride.dts b/arch/arm64/boot/dts/qcom/sa8540p-adp-ride.dts
new file mode 100644
index 000000000000..f5957bfea77b
--- /dev/null
+++ b/arch/arm64/boot/dts/qcom/sa8540p-adp-ride.dts
@@ -0,0 +1,72 @@ 
+// SPDX-License-Identifier: BSD-3-Clause
+/*
+ * Copyright (c) 2021, The Linux Foundation. All rights reserved.
+ * Copyright (c) 2022, Linaro Limited
+ * Copyright (c) 2022, Qualcomm Innovation Center, Inc. All rights reserved.
+ */
+
+/dts-v1/;
+
+#include "sa8540p-adp.dtsi"
+
+/ {
+	model = "Qualcomm SA8540 ADP";
+	compatible = "qcom,sa8540p-adp-ride", "qcom,sa8540p";
+};
+
+&ufs_mem_hc {
+	reset-gpios = <&tlmm 228 GPIO_ACTIVE_LOW>;
+
+	vcc-supply = <&vreg_l17c>;
+	vcc-max-microamp = <800000>;
+	vccq-supply = <&vreg_l6c>;
+	vccq-max-microamp = <900000>;
+
+	status = "okay";
+};
+
+&ufs_mem_phy {
+	vdda-phy-supply = <&vreg_l8g>;
+	vdda-pll-supply = <&vreg_l3g>;
+
+	status = "okay";
+};
+
+&usb_0 {
+	status = "okay";
+};
+
+&usb_0_dwc3 {
+	/* TODO: Define USB-C connector properly */
+	dr_mode = "peripheral";
+};
+
+&usb_0_hsphy {
+	vdda-pll-supply = <&vreg_l5a>;
+	vdda18-supply = <&vreg_l7a>;
+	vdda33-supply = <&vreg_l13a>;
+
+	status = "okay";
+};
+
+&usb_0_qmpphy {
+	vdda-phy-supply = <&vreg_l3a>;
+	vdda-pll-supply = <&vreg_l5a>;
+
+	status = "okay";
+};
+
+&usb_2_hsphy0 {
+	vdda-pll-supply = <&vreg_l5a>;
+	vdda18-supply = <&vreg_l7g>;
+	vdda33-supply = <&vreg_l13a>;
+
+	status = "okay";
+};
+
+&usb_2_qmpphy0 {
+	vdda-phy-supply = <&vreg_l3a>;
+	vdda-pll-supply = <&vreg_l5a>;
+
+	status = "okay";
+};