From patchwork Wed Oct 12 08:12:41 2022 Content-Type: text/plain; charset="utf-8" MIME-Version: 1.0 Content-Transfer-Encoding: 7bit X-Patchwork-Submitter: Johan Hovold X-Patchwork-Id: 614846 Return-Path: X-Spam-Checker-Version: SpamAssassin 3.4.0 (2014-02-07) on aws-us-west-2-korg-lkml-1.web.codeaurora.org Received: from vger.kernel.org (vger.kernel.org [23.128.96.18]) by smtp.lore.kernel.org (Postfix) with ESMTP id C47BFC07E9D for ; Wed, 12 Oct 2022 08:16:11 +0000 (UTC) Received: (majordomo@vger.kernel.org) by vger.kernel.org via listexpand id S229936AbiJLIQK (ORCPT ); Wed, 12 Oct 2022 04:16:10 -0400 Received: from lindbergh.monkeyblade.net ([23.128.96.19]:50000 "EHLO lindbergh.monkeyblade.net" rhost-flags-OK-OK-OK-OK) by vger.kernel.org with ESMTP id S229902AbiJLIQA (ORCPT ); Wed, 12 Oct 2022 04:16:00 -0400 Received: from dfw.source.kernel.org (dfw.source.kernel.org [IPv6:2604:1380:4641:c500::1]) by lindbergh.monkeyblade.net (Postfix) with ESMTPS id 8001A9F745; Wed, 12 Oct 2022 01:15:58 -0700 (PDT) Received: from smtp.kernel.org (relay.kernel.org [52.25.139.140]) (using TLSv1.2 with cipher ECDHE-RSA-AES256-GCM-SHA384 (256/256 bits)) (No client certificate requested) by dfw.source.kernel.org (Postfix) with ESMTPS id 6F1BD6147B; Wed, 12 Oct 2022 08:15:56 +0000 (UTC) Received: by smtp.kernel.org (Postfix) with ESMTPSA id B5A69C4FF0B; Wed, 12 Oct 2022 08:15:55 +0000 (UTC) DKIM-Signature: v=1; a=rsa-sha256; c=relaxed/simple; d=kernel.org; s=k20201202; t=1665562555; bh=nTh2lwlRgXzKhugVBnE4PFdAg98XwlPj4nCwR3AOzzE=; h=From:To:Cc:Subject:Date:In-Reply-To:References:From; b=V26VyxmGvzJtCCfXWYvJQZ202ubdjNhF3A6hQUIgfrcSuYzCZXvUSWJrxWm7aTaqW jabUc3iCA1i31uOrLoAxVoOknyaKLEs3FiMzhqNPVpUASSNT9o+UUH46bwR4B/qqxL xbl8hasI32R4ncgkYzx8TZK20vSsmbS3Mt3yG330M9rv3TjVEuTY4V64fz3ygfjQtK NhAZGus73/H49RS3AD+foR+btnqcSbdoONdSxFaqFVFaVW4eZLwODWlhZ5yKJd8DmP Ten5QREBwpblP2wovvm14eK777eJiUn3I+J0ip0BPXez/0Q8KA1/HshxsshvBrMU5Z SR87MmT6vmktg== Received: from johan by xi.lan with local (Exim 4.94.2) (envelope-from ) id 1oiWu3-0004ox-Cb; Wed, 12 Oct 2022 10:15:47 +0200 From: Johan Hovold To: Vinod Koul Cc: Andy Gross , Bjorn Andersson , Konrad Dybcio , Kishon Vijay Abraham I , Dmitry Baryshkov , linux-arm-msm@vger.kernel.org, linux-phy@lists.infradead.org, linux-kernel@vger.kernel.org, Johan Hovold Subject: [PATCH v2 14/14] phy: qcom-qmp-usb: drop power-down delay config Date: Wed, 12 Oct 2022 10:12:41 +0200 Message-Id: <20221012081241.18273-15-johan+linaro@kernel.org> X-Mailer: git-send-email 2.35.1 In-Reply-To: <20221012081241.18273-1-johan+linaro@kernel.org> References: <20221012081241.18273-1-johan+linaro@kernel.org> MIME-Version: 1.0 Precedence: bulk List-ID: X-Mailing-List: linux-arm-msm@vger.kernel.org The power-down delay was included in the first version of the QMP driver as an optional delay after powering on the PHY (using POWER_DOWN_CONTROL) and just before starting it. Later changes modified this sequence by powering on before initialising the PHY, but the optional delay stayed where it was (i.e. before starting the PHY). The vendor driver does not use a delay before starting the PHY and this is likely not needed on any platform unless there is a corresponding delay in the vendor kernel init sequence tables (i.e. in devicetree). Let's keep the delay for now, but drop the redundant delay period configuration while increasing the unnecessarily low timer slack somewhat. Reviewed-by: Dmitry Baryshkov Signed-off-by: Johan Hovold --- drivers/phy/qualcomm/phy-qcom-qmp-usb.c | 35 +------------------------ 1 file changed, 1 insertion(+), 34 deletions(-) diff --git a/drivers/phy/qualcomm/phy-qcom-qmp-usb.c b/drivers/phy/qualcomm/phy-qcom-qmp-usb.c index 57dda1ecefe6..751f628710eb 100644 --- a/drivers/phy/qualcomm/phy-qcom-qmp-usb.c +++ b/drivers/phy/qualcomm/phy-qcom-qmp-usb.c @@ -63,8 +63,6 @@ #define CLAMP_EN BIT(0) /* enables i/o clamp_n */ #define PHY_INIT_COMPLETE_TIMEOUT 10000 -#define POWER_DOWN_DELAY_US_MIN 10 -#define POWER_DOWN_DELAY_US_MAX 11 struct qmp_phy_init_tbl { unsigned int offset; @@ -1452,9 +1450,6 @@ struct qmp_phy_cfg { /* true, if PHY needs delay after POWER_DOWN */ bool has_pwrdn_delay; - /* power_down delay in usec */ - int pwrdn_delay_min; - int pwrdn_delay_max; /* true, if PHY has a separate DP_COM control block */ bool has_phy_dp_com_ctrl; @@ -1660,9 +1655,6 @@ static const struct qmp_phy_cfg qmp_v3_usb3phy_cfg = { .phy_status = PHYSTATUS, .has_pwrdn_delay = true, - .pwrdn_delay_min = POWER_DOWN_DELAY_US_MIN, - .pwrdn_delay_max = POWER_DOWN_DELAY_US_MAX, - .has_phy_dp_com_ctrl = true, }; @@ -1690,9 +1682,6 @@ static const struct qmp_phy_cfg sc7180_usb3phy_cfg = { .phy_status = PHYSTATUS, .has_pwrdn_delay = true, - .pwrdn_delay_min = POWER_DOWN_DELAY_US_MIN, - .pwrdn_delay_max = POWER_DOWN_DELAY_US_MAX, - .has_phy_dp_com_ctrl = true, }; @@ -1744,8 +1733,6 @@ static const struct qmp_phy_cfg qmp_v3_usb3_uniphy_cfg = { .phy_status = PHYSTATUS, .has_pwrdn_delay = true, - .pwrdn_delay_min = POWER_DOWN_DELAY_US_MIN, - .pwrdn_delay_max = POWER_DOWN_DELAY_US_MAX, }; static const struct qmp_phy_cfg msm8998_usb3phy_cfg = { @@ -1798,11 +1785,7 @@ static const struct qmp_phy_cfg sm8150_usb3phy_cfg = { .pwrdn_ctrl = SW_PWRDN, .phy_status = PHYSTATUS, - .has_pwrdn_delay = true, - .pwrdn_delay_min = POWER_DOWN_DELAY_US_MIN, - .pwrdn_delay_max = POWER_DOWN_DELAY_US_MAX, - .has_phy_dp_com_ctrl = true, }; @@ -1833,8 +1816,6 @@ static const struct qmp_phy_cfg sm8150_usb3_uniphy_cfg = { .phy_status = PHYSTATUS, .has_pwrdn_delay = true, - .pwrdn_delay_min = POWER_DOWN_DELAY_US_MIN, - .pwrdn_delay_max = POWER_DOWN_DELAY_US_MAX, }; static const struct qmp_phy_cfg sm8250_usb3phy_cfg = { @@ -1864,9 +1845,6 @@ static const struct qmp_phy_cfg sm8250_usb3phy_cfg = { .phy_status = PHYSTATUS, .has_pwrdn_delay = true, - .pwrdn_delay_min = POWER_DOWN_DELAY_US_MIN, - .pwrdn_delay_max = POWER_DOWN_DELAY_US_MAX, - .has_phy_dp_com_ctrl = true, }; @@ -1897,8 +1875,6 @@ static const struct qmp_phy_cfg sm8250_usb3_uniphy_cfg = { .phy_status = PHYSTATUS, .has_pwrdn_delay = true, - .pwrdn_delay_min = POWER_DOWN_DELAY_US_MIN, - .pwrdn_delay_max = POWER_DOWN_DELAY_US_MAX, }; static const struct qmp_phy_cfg sdx55_usb3_uniphy_cfg = { @@ -1928,8 +1904,6 @@ static const struct qmp_phy_cfg sdx55_usb3_uniphy_cfg = { .phy_status = PHYSTATUS, .has_pwrdn_delay = true, - .pwrdn_delay_min = POWER_DOWN_DELAY_US_MIN, - .pwrdn_delay_max = POWER_DOWN_DELAY_US_MAX, }; static const struct qmp_phy_cfg sdx65_usb3_uniphy_cfg = { @@ -1959,8 +1933,6 @@ static const struct qmp_phy_cfg sdx65_usb3_uniphy_cfg = { .phy_status = PHYSTATUS, .has_pwrdn_delay = true, - .pwrdn_delay_min = POWER_DOWN_DELAY_US_MIN, - .pwrdn_delay_max = POWER_DOWN_DELAY_US_MAX, }; static const struct qmp_phy_cfg sm8350_usb3phy_cfg = { @@ -1990,9 +1962,6 @@ static const struct qmp_phy_cfg sm8350_usb3phy_cfg = { .phy_status = PHYSTATUS, .has_pwrdn_delay = true, - .pwrdn_delay_min = POWER_DOWN_DELAY_US_MIN, - .pwrdn_delay_max = POWER_DOWN_DELAY_US_MAX, - .has_phy_dp_com_ctrl = true, }; @@ -2023,8 +1992,6 @@ static const struct qmp_phy_cfg sm8350_usb3_uniphy_cfg = { .phy_status = PHYSTATUS, .has_pwrdn_delay = true, - .pwrdn_delay_min = POWER_DOWN_DELAY_US_MIN, - .pwrdn_delay_max = POWER_DOWN_DELAY_US_MAX, }; static const struct qmp_phy_cfg qcm2290_usb3phy_cfg = { @@ -2205,7 +2172,7 @@ static int qmp_usb_power_on(struct phy *phy) qmp_usb_configure(pcs, cfg->pcs_tbl, cfg->pcs_tbl_num); if (cfg->has_pwrdn_delay) - usleep_range(cfg->pwrdn_delay_min, cfg->pwrdn_delay_max); + usleep_range(10, 20); /* Pull PHY out of reset state */ qphy_clrbits(pcs, cfg->regs[QPHY_SW_RESET], SW_RESET);