| Message ID | 20221027074652.1044235-3-dmitry.torokhov@gmail.com |
|---|---|
| State | Accepted |
| Commit | 15d9fcbb3e6e8420c7d1ae331405780c5d9c1c25 |
| Headers | show |
| Series | [1/6] arm64: dts: qcom: msm8996: fix sound card reset line polarity | expand |
diff --git a/arch/arm64/boot/dts/qcom/sm8250-mtp.dts b/arch/arm64/boot/dts/qcom/sm8250-mtp.dts index 9db6136321b4..391806c62ccc 100644 --- a/arch/arm64/boot/dts/qcom/sm8250-mtp.dts +++ b/arch/arm64/boot/dts/qcom/sm8250-mtp.dts @@ -635,7 +635,7 @@ &soc { wcd938x: codec { compatible = "qcom,wcd9380-codec"; #sound-dai-cells = <1>; - reset-gpios = <&tlmm 32 GPIO_ACTIVE_HIGH>; + reset-gpios = <&tlmm 32 GPIO_ACTIVE_LOW>; vdd-buck-supply = <&vreg_s4a_1p8>; vdd-rxtx-supply = <&vreg_s4a_1p8>; vdd-io-supply = <&vreg_s4a_1p8>;
The driver for the codec, when resetting the chip, first drives the line low, and then high. This means that the line is active low. Change the annotation in the DTS accordingly. Fixes: 36c9d012f193 ("arm64: dts: qcom: use GPIO flags for tlmm") Fixes: 5a263cf629a8 ("arm64: dts: qcom: sm8250-mtp: Add wcd9380 audio codec node") Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com> --- arch/arm64/boot/dts/qcom/sm8250-mtp.dts | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-)