diff mbox series

[v3,10/15] dt-bindings: remoteproc: qcom,sc8280xp-pas: split into separate file

Message ID 20221124184333.133911-11-krzysztof.kozlowski@linaro.org
State Accepted
Commit 397c619cad8109f5904466ee76d5a1533d2f1590
Headers show
Series dt-bindings: remoteproc: qcom: split and reorganize PAS/PIL | expand

Commit Message

Krzysztof Kozlowski Nov. 24, 2022, 6:43 p.m. UTC
Split SC8280XP remote processor Peripheral Authentication Service bindings
into their own file to reduce complexity and make maintenance easier.

While moving correctly constrain the number of interrupts per specific
device.

Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>

---

Changes since v2:
1. Drop if:then: for the clock and put it directly under properties.
2. Merge two if:then: clauses for setting interrupts.

Changes since v1:
1. Add qcom,qmp (not part of qcom,pas-common.yaml# anymore).
2. Add firmware-name to example.
3. Correct maxItems: 5 for interrupts.
---
 .../bindings/remoteproc/qcom,adsp.yaml        |  26 ----
 .../remoteproc/qcom,sc8280xp-pas.yaml         | 139 ++++++++++++++++++
 2 files changed, 139 insertions(+), 26 deletions(-)
 create mode 100644 Documentation/devicetree/bindings/remoteproc/qcom,sc8280xp-pas.yaml

Comments

Rob Herring Dec. 5, 2022, 7:50 p.m. UTC | #1
On Thu, 24 Nov 2022 19:43:28 +0100, Krzysztof Kozlowski wrote:
> Split SC8280XP remote processor Peripheral Authentication Service bindings
> into their own file to reduce complexity and make maintenance easier.
> 
> While moving correctly constrain the number of interrupts per specific
> device.
> 
> Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
> 
> ---
> 
> Changes since v2:
> 1. Drop if:then: for the clock and put it directly under properties.
> 2. Merge two if:then: clauses for setting interrupts.
> 
> Changes since v1:
> 1. Add qcom,qmp (not part of qcom,pas-common.yaml# anymore).
> 2. Add firmware-name to example.
> 3. Correct maxItems: 5 for interrupts.
> ---
>  .../bindings/remoteproc/qcom,adsp.yaml        |  26 ----
>  .../remoteproc/qcom,sc8280xp-pas.yaml         | 139 ++++++++++++++++++
>  2 files changed, 139 insertions(+), 26 deletions(-)
>  create mode 100644 Documentation/devicetree/bindings/remoteproc/qcom,sc8280xp-pas.yaml
> 

Acked-by: Rob Herring <robh@kernel.org>
diff mbox series

Patch

diff --git a/Documentation/devicetree/bindings/remoteproc/qcom,adsp.yaml b/Documentation/devicetree/bindings/remoteproc/qcom,adsp.yaml
index b14a83da37c2..67a68a8edc44 100644
--- a/Documentation/devicetree/bindings/remoteproc/qcom,adsp.yaml
+++ b/Documentation/devicetree/bindings/remoteproc/qcom,adsp.yaml
@@ -30,9 +30,6 @@  properties:
       - qcom,sc8180x-adsp-pas
       - qcom,sc8180x-cdsp-pas
       - qcom,sc8180x-mpss-pas
-      - qcom,sc8280xp-adsp-pas
-      - qcom,sc8280xp-nsp0-pas
-      - qcom,sc8280xp-nsp1-pas
       - qcom,sdm660-adsp-pas
       - qcom,sdm845-adsp-pas
       - qcom,sdm845-cdsp-pas
@@ -76,9 +73,6 @@  allOf:
               - qcom,sc8180x-adsp-pas
               - qcom,sc8180x-cdsp-pas
               - qcom,sc8180x-mpss-pas
-              - qcom,sc8280xp-adsp-pas
-              - qcom,sc8280xp-nsp0-pas
-              - qcom,sc8280xp-nsp1-pas
               - qcom,sdm845-adsp-pas
               - qcom,sdm845-cdsp-pas
     then:
@@ -123,9 +117,6 @@  allOf:
               - qcom,qcs404-wcss-pas
               - qcom,sc8180x-adsp-pas
               - qcom,sc8180x-cdsp-pas
-              - qcom,sc8280xp-adsp-pas
-              - qcom,sc8280xp-nsp0-pas
-              - qcom,sc8280xp-nsp1-pas
               - qcom,sdm845-adsp-pas
               - qcom,sdm845-cdsp-pas
     then:
@@ -240,7 +231,6 @@  allOf:
             enum:
               - qcom,sc8180x-adsp-pas
               - qcom,sc8180x-cdsp-pas
-              - qcom,sc8280xp-adsp-pas
     then:
       properties:
         power-domains:
@@ -252,22 +242,6 @@  allOf:
             - const: lcx
             - const: lmx
 
-  - if:
-      properties:
-        compatible:
-          contains:
-            enum:
-              - qcom,sc8280xp-nsp0-pas
-              - qcom,sc8280xp-nsp1-pas
-    then:
-      properties:
-        power-domains:
-          items:
-            - description: NSP power domain
-        power-domain-names:
-          items:
-            - const: nsp
-
   - if:
       properties:
         compatible:
diff --git a/Documentation/devicetree/bindings/remoteproc/qcom,sc8280xp-pas.yaml b/Documentation/devicetree/bindings/remoteproc/qcom,sc8280xp-pas.yaml
new file mode 100644
index 000000000000..c08274aaa6f8
--- /dev/null
+++ b/Documentation/devicetree/bindings/remoteproc/qcom,sc8280xp-pas.yaml
@@ -0,0 +1,139 @@ 
+# SPDX-License-Identifier: GPL-2.0 OR BSD-2-Clause
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/remoteproc/qcom,sc8280xp-pas.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Qualcomm SC8280XP Peripheral Authentication Service
+
+maintainers:
+  - Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org>
+
+description:
+  Qualcomm SC8280XP SoC Peripheral Authentication Service loads and boots
+  firmware on the Qualcomm DSP Hexagon cores.
+
+properties:
+  compatible:
+    enum:
+      - qcom,sc8280xp-adsp-pas
+      - qcom,sc8280xp-nsp0-pas
+      - qcom,sc8280xp-nsp1-pas
+
+  reg:
+    maxItems: 1
+
+  clocks:
+    items:
+      - description: XO clock
+
+  clock-names:
+    items:
+      - const: xo
+
+  qcom,qmp:
+    $ref: /schemas/types.yaml#/definitions/phandle
+    description: Reference to the AOSS side-channel message RAM.
+
+  smd-edge: false
+
+required:
+  - compatible
+  - reg
+
+allOf:
+  - $ref: /schemas/remoteproc/qcom,pas-common.yaml#
+  - if:
+      properties:
+        compatible:
+          enum:
+            - qcom,sc8280xp-nsp0-pas
+            - qcom,sc8280xp-nsp1-pas
+    then:
+      properties:
+        interrupts:
+          maxItems: 5
+        interrupt-names:
+          maxItems: 5
+    else:
+      properties:
+        interrupts:
+          minItems: 6
+        interrupt-names:
+          minItems: 6
+
+  - if:
+      properties:
+        compatible:
+          enum:
+            - qcom,sc8280xp-adsp-pas
+    then:
+      properties:
+        power-domains:
+          items:
+            - description: LCX power domain
+            - description: LMX power domain
+        power-domain-names:
+          items:
+            - const: lcx
+            - const: lmx
+    else:
+      properties:
+        power-domains:
+          items:
+            - description: NSP power domain
+        power-domain-names:
+          items:
+            - const: nsp
+
+unevaluatedProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/clock/qcom,rpmh.h>
+    #include <dt-bindings/interrupt-controller/arm-gic.h>
+    #include <dt-bindings/interrupt-controller/irq.h>
+    #include <dt-bindings/mailbox/qcom-ipcc.h>
+    #include <dt-bindings/power/qcom-rpmpd.h>
+
+    remoteproc@3000000 {
+        compatible = "qcom,sc8280xp-adsp-pas";
+        reg = <0x03000000 0x100>;
+
+        clocks = <&rpmhcc RPMH_CXO_CLK>;
+        clock-names = "xo";
+
+        firmware-name = "qcom/sc8280xp/qcadsp8280.mbn";
+
+        interrupts-extended = <&intc GIC_SPI 162 IRQ_TYPE_LEVEL_HIGH>,
+                              <&smp2p_adsp_in 0 IRQ_TYPE_EDGE_RISING>,
+                              <&smp2p_adsp_in 1 IRQ_TYPE_EDGE_RISING>,
+                              <&smp2p_adsp_in 2 IRQ_TYPE_EDGE_RISING>,
+                              <&smp2p_adsp_in 3 IRQ_TYPE_EDGE_RISING>,
+                              <&smp2p_adsp_in 7 IRQ_TYPE_EDGE_RISING>;
+        interrupt-names = "wdog", "fatal", "ready",
+                          "handover", "stop-ack", "shutdown-ack";
+
+        memory-region = <&pil_adsp_mem>;
+
+        power-domains = <&rpmhpd SC8280XP_LCX>,
+                        <&rpmhpd SC8280XP_LMX>;
+        power-domain-names = "lcx", "lmx";
+
+        qcom,qmp = <&aoss_qmp>;
+        qcom,smem-states = <&smp2p_adsp_out 0>;
+        qcom,smem-state-names = "stop";
+
+        glink-edge {
+            interrupts-extended = <&ipcc IPCC_CLIENT_LPASS
+                                         IPCC_MPROC_SIGNAL_GLINK_QMP
+                                         IRQ_TYPE_EDGE_RISING>;
+            mboxes = <&ipcc IPCC_CLIENT_LPASS
+                            IPCC_MPROC_SIGNAL_GLINK_QMP>;
+
+            label = "lpass";
+            qcom,remote-pid = <2>;
+
+            /* ... */
+        };
+    };