From patchwork Wed Dec 7 18:30:45 2022 Content-Type: text/plain; charset="utf-8" MIME-Version: 1.0 Content-Transfer-Encoding: 7bit X-Patchwork-Submitter: Luca Weiss X-Patchwork-Id: 632353 Return-Path: X-Spam-Checker-Version: SpamAssassin 3.4.0 (2014-02-07) on aws-us-west-2-korg-lkml-1.web.codeaurora.org Received: from vger.kernel.org (vger.kernel.org [23.128.96.18]) by smtp.lore.kernel.org (Postfix) with ESMTP id 1E732C47089 for ; Wed, 7 Dec 2022 18:31:52 +0000 (UTC) Received: (majordomo@vger.kernel.org) by vger.kernel.org via listexpand id S229797AbiLGSbq (ORCPT ); Wed, 7 Dec 2022 13:31:46 -0500 Received: from lindbergh.monkeyblade.net ([23.128.96.19]:42940 "EHLO lindbergh.monkeyblade.net" rhost-flags-OK-OK-OK-OK) by vger.kernel.org with ESMTP id S229722AbiLGSbf (ORCPT ); Wed, 7 Dec 2022 13:31:35 -0500 Received: from mail.z3ntu.xyz (mail.z3ntu.xyz [128.199.32.197]) by lindbergh.monkeyblade.net (Postfix) with ESMTPS id D01C66E574; Wed, 7 Dec 2022 10:31:33 -0800 (PST) Received: from [192.168.178.23] (unknown [62.108.10.64]) by mail.z3ntu.xyz (Postfix) with ESMTPSA id E6398CA473; Wed, 7 Dec 2022 18:31:01 +0000 (UTC) DKIM-Signature: v=1; a=rsa-sha256; c=simple/simple; d=z3ntu.xyz; s=z3ntu; t=1670437862; bh=NPfgoa3jrigKRkS6OV0XIN3b8dwyV8EmRW4epf631/s=; h=From:Date:Subject:References:In-Reply-To:To:Cc; b=fUwJikyRUDfEdi8VtZYPmOr3NplY3QiVjkotuX2+/AIrjpTnbQqHqnAHsr5fitMRL wU76tQkWQASGUokQHrXooxGYUBIuZKqvMBcxY5blRKh/kjjRPN3Wygj5C2Rfjq+PhM SCC3wXqxo8I4OXGXjK3VQeP2O1LFTjAwA1/BSwLE= From: Luca Weiss Date: Wed, 07 Dec 2022 19:30:45 +0100 Subject: [PATCH v3 8/9] arm64: dts: qcom: msm8953: Add device tree for Xiaomi Redmi 5 Plus MIME-Version: 1.0 Message-Id: <20221207-msm8953-6-1-next-dtbs-v3-v3-8-a64b3b0af0eb@z3ntu.xyz> References: <20221207-msm8953-6-1-next-dtbs-v3-v3-0-a64b3b0af0eb@z3ntu.xyz> In-Reply-To: <20221207-msm8953-6-1-next-dtbs-v3-v3-0-a64b3b0af0eb@z3ntu.xyz> To: Krzysztof Kozlowski , Rob Herring , Konrad Dybcio , Kees Cook , "Guilherme G. Piccoli" , Andy Gross , Bjorn Andersson , Tony Luck Cc: Gabriela David , Eugene Lepshy , linux-hardening@vger.kernel.org, Anton Bambura , Krzysztof Kozlowski , Luca Weiss , Adam Skladowski , ~postmarketos/upstreaming@lists.sr.ht, linux-arm-msm@vger.kernel.org, phone-devel@vger.kernel.org, Danila Tikhonov , Gianluca Boiano , Sireesh Kodali , Vladimir Lypak , Julian Braha , linux-kernel@vger.kernel.org, devicetree@vger.kernel.org, Alejandro Tafalla X-Mailer: b4 0.10.1 X-Developer-Signature: v=1; a=openpgp-sha256; l=9507; i=luca@z3ntu.xyz; h=from:subject:message-id; bh=5SrLeS7Gsr5HU9IP+bjgqR2wSSVXySYc9ccC/dzGMNI=; b=owEBbQKS/ZANAwAIAXLYQ7idTddWAcsmYgBjkNvgAf+yiE+poJLVaCvycACz5VqQbYOvH/spjfLA 0N019rGJAjMEAAEIAB0WIQQ5utIvCCzakboVj/py2EO4nU3XVgUCY5Db4AAKCRBy2EO4nU3XVovxD/ oCbJRhNOdnX9sy3yylfNKw78SJQQww2SdALfYetWdRQDVDqTk/RW5wp2QAmzBebwbrWc1JZtJ0Qc3r QgOFTGn48B1irCtwUhUPOTcEXKBDHDuCQy2+zUpK7ZVpw8R3vghcySXUbKHDnGK2vKhin+TLVw1krn FJkZFUKm1t0KsiQ/THHwZaCpYc6Ssrkba+k9qfSmKrf6FwyWDGpDHQfWIR8CkmasrByObcniZoU9db WvoSK6Qe7WVdjFWsrtFsb2lpkNQiLbul4aFtQsmQUnQ8NjrGEo/Av0UPQ09KvoYSFGlu9qx/j/a5F3 eM5ybeyBHlYFp8HpAkRGo+oI1/lgJdap/XUJLQGZ2f3wTgG/1VIhfqySd/K+RywkbQfVVzcc6qgCfY j4U0KlnZnnM9bUT4dEVzkd3okunmjYErc4kuok6cR8UGkytQ9RXSAhJndwrqTeeom4QPzgYj9Ptg4w riZTE73JPGmG8F47bHDhrTS1ddbWudGm5mwC/lprk/f3Zs4AbRgLjGKdWHLVoehKzMVPRBHkT9Txxd 6gM1gHYRFhaDH3ddkfVSn+OoagKNDi51u5mDnQ6e2ZR6QiN2kv1g6N534M27G/ZCizz2ai8HRRGvj1 Lk51vjc5Rm86csACqQUpsCtT55pEZckJplXyFgY6KxFeRRnkut2AM2tEA0OA== X-Developer-Key: i=luca@z3ntu.xyz; a=openpgp; fpr=BD04DA24C971B8D587B2B8D7FAF69CF6CD2D02CD Precedence: bulk List-ID: X-Mailing-List: linux-arm-msm@vger.kernel.org From: Eugene Lepshy Add device tree for the Xiaomi Redmi 5 Plus (vince) smartphone. This device is based on Snapdragon 625 (msm8953) SoC. Signed-off-by: Eugene Lepshy Co-developed-by: Gianluca Boiano Signed-off-by: Gianluca Boiano Signed-off-by: Luca Weiss Reviewed-by: Konrad Dybcio --- arch/arm64/boot/dts/qcom/Makefile | 1 + arch/arm64/boot/dts/qcom/msm8953-xiaomi-vince.dts | 361 ++++++++++++++++++++++ 2 files changed, 362 insertions(+) diff --git a/arch/arm64/boot/dts/qcom/Makefile b/arch/arm64/boot/dts/qcom/Makefile index 054dfbe820d9..995973d3960a 100644 --- a/arch/arm64/boot/dts/qcom/Makefile +++ b/arch/arm64/boot/dts/qcom/Makefile @@ -25,6 +25,7 @@ dtb-$(CONFIG_ARCH_QCOM) += msm8953-motorola-potter.dtb dtb-$(CONFIG_ARCH_QCOM) += msm8953-xiaomi-daisy.dtb dtb-$(CONFIG_ARCH_QCOM) += msm8953-xiaomi-mido.dtb dtb-$(CONFIG_ARCH_QCOM) += msm8953-xiaomi-tissot.dtb +dtb-$(CONFIG_ARCH_QCOM) += msm8953-xiaomi-vince.dtb dtb-$(CONFIG_ARCH_QCOM) += msm8956-sony-xperia-loire-kugo.dtb dtb-$(CONFIG_ARCH_QCOM) += msm8956-sony-xperia-loire-suzu.dtb dtb-$(CONFIG_ARCH_QCOM) += msm8992-lg-bullhead-rev-10.dtb diff --git a/arch/arm64/boot/dts/qcom/msm8953-xiaomi-vince.dts b/arch/arm64/boot/dts/qcom/msm8953-xiaomi-vince.dts new file mode 100644 index 000000000000..b5be55034fd3 --- /dev/null +++ b/arch/arm64/boot/dts/qcom/msm8953-xiaomi-vince.dts @@ -0,0 +1,361 @@ +// SPDX-License-Identifier: BSD-3-Clause +/* + * Copyright (c) 2022, Eugene Lepshy + * Copyright (c) 2022, Gianluca Boiano + */ +/dts-v1/; + +#include "msm8953.dtsi" +#include "pm8953.dtsi" +#include "pmi8950.dtsi" +#include + +/delete-node/ &adsp_fw_mem; +/delete-node/ &cont_splash_mem; +/delete-node/ &qseecom_mem; +/delete-node/ &wcnss_fw_mem; + +/ { + model = "Xiaomi Redmi 5 Plus"; + compatible = "xiaomi,vince", "qcom,msm8953"; + chassis-type = "handset"; + qcom,msm-id = <293 0>; + qcom,board-id= <0x1000b 0x08>; + + gpio-keys { + compatible = "gpio-keys"; + + pinctrl-names = "default"; + pinctrl-0 = <&gpio_key_default>; + + key-volume-up { + label = "volume_up"; + linux,code = ; + gpios = <&tlmm 85 GPIO_ACTIVE_LOW>; + }; + }; + + reserved-memory { + qseecom_mem: qseecom@84a00000 { + reg = <0x0 0x84a00000 0x0 0x1900000>; + no-map; + }; + + cont_splash_mem: cont-splash@90001000 { + reg = <0x0 0x90001000 0x0 (1080 * 2160 * 3)>; + no-map; + }; + + adsp_fw_mem: adsp@8d600000 { + reg = <0x0 0x8d600000 0x0 0x1200000>; + no-map; + }; + + wcnss_fw_mem: wcnss@8e800000 { + reg = <0x0 0x8e800000 0x0 0x700000>; + no-map; + }; + + ramoops@9ff00000 { + compatible = "ramoops"; + reg = <0x0 0x9ff00000 0x0 0x100000>; + record-size = <0x1000>; + console-size = <0x80000>; + ftrace-size = <0x1000>; + pmsg-size = <0x8000>; + }; + }; + + /* + * We bitbang on &i2c_4 because BLSP is protected by TZ as sensors are + * normally proxied via ADSP firmware. GPIOs aren't protected. + */ + i2c-sensors { + compatible = "i2c-gpio"; + sda-gpios = <&tlmm 14 (GPIO_ACTIVE_HIGH|GPIO_OPEN_DRAIN)>; + scl-gpios = <&tlmm 15 (GPIO_ACTIVE_HIGH|GPIO_OPEN_DRAIN)>; + i2c-gpio,delay-us = <2>; /* ~100 kHz */ + #address-cells = <1>; + #size-cells = <0>; + + imu@6a { + compatible = "st,lsm6dsl"; + reg = <0x6a>; + vdd-supply = <&pm8953_l10>; + vddio-supply = <&pm8953_l6>; + mount-matrix = "1", "0", "0", + "0", "-1", "0", + "0", "0", "1"; + }; + }; + + vph_pwr: vph-pwr-regulator { + compatible = "regulator-fixed"; + regulator-name = "vph_pwr"; + regulator-always-on; + regulator-boot-on; + }; +}; + +&hsusb_phy { + vdd-supply = <&pm8953_l3>; + vdda-pll-supply = <&pm8953_l7>; + vdda-phy-dpdm-supply = <&pm8953_l13>; + + status = "okay"; +}; + +&i2c_2 { + status = "okay"; + + led-controller@45 { + compatible = "awinic,aw2013"; + reg = <0x45>; + + vcc-supply = <&pm8953_l10>; + + #address-cells = <1>; + #size-cells = <0>; + + led@0 { + reg = <0>; + led-max-microamp = <5000>; + function = LED_FUNCTION_INDICATOR; + color = ; + }; + }; +}; + +&i2c_3 { + status = "okay"; + + touchscreen@20 { + reg = <0x20>; + compatible = "syna,rmi4-i2c"; + interrupts-parent = <&tlmm>; + interrupts-extended = <&tlmm 65 IRQ_TYPE_EDGE_FALLING>; + + #address-cells = <1>; + #size-cells = <0>; + + vdd-supply = <&pm8953_l10>; + vio-supply = <&pm8953_l6>; + + pinctrl-names = "init", "suspend"; + pinctrl-0 = <&ts_reset_active &ts_int_active>; + pinctrl-1 = <&ts_reset_suspend &ts_int_suspend>; + syna,reset-delay-ms = <200>; + syna,startup-delay-ms = <500>; + + rmi4-f01@1 { + reg = <0x01>; + syna,nosleep-mode = <1>; + }; + + rmi4-f12@12 { + reg = <0x12>; + syna,rezero-wait-ms = <20>; + syna,sensor-type = <1>; + touchscreen-x-mm = <68>; + touchscreen-y-mm = <122>; + }; + }; +}; + +&pm8953_resin { + linux,code = ; + status = "okay"; +}; + +&pmi8950_wled { + qcom,current-limit-microamp = <20000>; + qcom,ovp-millivolt = <29600>; + qcom,num-strings = <2>; + qcom,external-pfet; + qcom,cabc; + + status = "okay"; +}; + +&rpm_requests { + regulators { + compatible = "qcom,rpm-pm8953-regulators"; + vdd_s1-supply = <&vph_pwr>; + vdd_s2-supply = <&vph_pwr>; + vdd_s3-supply = <&vph_pwr>; + vdd_s4-supply = <&vph_pwr>; + vdd_s5-supply = <&vph_pwr>; + vdd_s6-supply = <&vph_pwr>; + vdd_s7-supply = <&vph_pwr>; + vdd_l1-supply = <&pm8953_s3>; + vdd_l2_l3-supply = <&pm8953_s3>; + vdd_l4_l5_l6_l7_l16_l19-supply = <&pm8953_s4>; + vdd_l8_l11_l12_l13_l14_l15-supply = <&vph_pwr>; + vdd_l9_l10_l17_l18_l22-supply = <&vph_pwr>; + + pm8953_s1: s1 { + regulator-min-microvolt = <870000>; + regulator-max-microvolt = <1156000>; + }; + + pm8953_s3: s3 { + regulator-min-microvolt = <984000>; + regulator-max-microvolt = <1224000>; + }; + + pm8953_s4: s4 { + regulator-min-microvolt = <1900000>; + regulator-max-microvolt = <2050000>; + }; + + pm8953_l1: l1 { + regulator-min-microvolt = <1000000>; + regulator-max-microvolt = <1100000>; + }; + + pm8953_l2: l2 { + regulator-min-microvolt = <1200000>; + regulator-max-microvolt = <1225000>; + }; + + pm8953_l3: l3 { + regulator-min-microvolt = <925000>; + regulator-max-microvolt = <925000>; + }; + + pm8953_l5: l5 { + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + }; + + pm8953_l6: l6 { + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + }; + + pm8953_l7: l7 { + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1900000>; + }; + + pm8953_l8: l8 { + regulator-min-microvolt = <2900000>; + regulator-max-microvolt = <2900000>; + }; + + pm8953_l9: l9 { + regulator-min-microvolt = <3000000>; + regulator-max-microvolt = <3300000>; + }; + + pm8953_l10: l10 { + regulator-min-microvolt = <2850000>; + regulator-max-microvolt = <2850000>; + }; + + pm8953_l11: l11 { + regulator-min-microvolt = <2950000>; + regulator-max-microvolt = <2950000>; + }; + + pm8953_l12: l12 { + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <2950000>; + }; + + pm8953_l13: l13 { + regulator-min-microvolt = <3125000>; + regulator-max-microvolt = <3125000>; + }; + + pm8953_l16: l16 { + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + }; + + pm8953_l17: l17 { + regulator-min-microvolt = <2750000>; + regulator-max-microvolt = <2850000>; + }; + + pm8953_l19: l19 { + regulator-min-microvolt = <1200000>; + regulator-max-microvolt = <1380000>; + }; + + pm8953_l22: l22 { + regulator-min-microvolt = <2800000>; + regulator-max-microvolt = <2800000>; + }; + + pm8953_l23: l23 { + regulator-min-microvolt = <1200000>; + regulator-max-microvolt = <1225000>; + }; + }; +}; + +&sdhc_1 { + vmmc-supply = <&pm8953_l8>; + vqmmc-supply = <&pm8953_l5>; + + status = "okay"; +}; + +&sdhc_2 { + vmmc-supply = <&pm8953_l11>; + vqmmc-supply = <&pm8953_l12>; + + pinctrl-names = "default", "sleep"; + pinctrl-0 = <&sdc2_clk_on &sdc2_cmd_on &sdc2_data_on &sdc2_cd_on>; + pinctrl-1 = <&sdc2_clk_off &sdc2_cmd_off &sdc2_data_off &sdc2_cd_off>; + + status = "okay"; +}; + +&tlmm { + gpio-reserved-ranges = <0 4>, <16 4>, <135 4>; + + ts_reset_active: ts-reset-active-state { + pins = "gpio64"; + function = "gpio"; + drive-strength = <8>; + bias-pull-up; + }; + + ts_reset_suspend: ts-reset-suspend-state { + pins = "gpio64"; + function = "gpio"; + drive-strength = <2>; + bias-pull-up; + }; + + ts_int_active: ts-int-active-state { + pins = "gpio65"; + function = "gpio"; + drive-strength = <8>; + bias-pull-up; + }; + + ts_int_suspend: ts-int-suspend-state { + pins = "gpio65"; + function = "gpio"; + drive-strength = <2>; + bias-pull-down; + }; +}; + +&uart_0 { + pinctrl-names = "default"; + pinctrl-0 = <&uart_console_active>; + + status = "okay"; +}; + +&usb3 { + status = "okay"; +}; + +&usb3_dwc3 { + dr_mode = "peripheral"; +};