diff mbox series

[2/4] arm64: dts: qcom: sdm845: move DSI/QUP/QSPI opp tables out of SoC node

Message ID 20221210115704.97614-2-krzysztof.kozlowski@linaro.org
State Superseded
Headers show
Series [1/4] arm64: dts: qcom: sc7180: move QUP and QSPI opp tables out of SoC node | expand

Commit Message

Krzysztof Kozlowski Dec. 10, 2022, 11:57 a.m. UTC
The SoC node is a simple-bus and its schema expect to have nodes only
with unit addresses:

  sdm850-lenovo-yoga-c630.dtb: soc@0: opp-table-qup: {'compatible': ['operating-points-v2'], 'phandle': [[60]], 'opp-50000000':
  ... 'required-opps': [[55]]}} should not be valid under {'type': 'object'}

Move to top-level OPP tables:
 - DSI and QUP which are shared between multiple nodes,
 - QSPI which cannot be placed in its node due to address/size cells.

Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
---
 arch/arm64/boot/dts/qcom/sdm845.dtsi | 154 +++++++++++++--------------
 1 file changed, 77 insertions(+), 77 deletions(-)
diff mbox series

Patch

diff --git a/arch/arm64/boot/dts/qcom/sdm845.dtsi b/arch/arm64/boot/dts/qcom/sdm845.dtsi
index a63dbd12230f..573b2394e63f 100644
--- a/arch/arm64/boot/dts/qcom/sdm845.dtsi
+++ b/arch/arm64/boot/dts/qcom/sdm845.dtsi
@@ -696,6 +696,83 @@  cpu4_opp32: opp-2803200000 {
 		};
 	};
 
+	dsi_opp_table: opp-table-dsi {
+		compatible = "operating-points-v2";
+
+		opp-19200000 {
+			opp-hz = /bits/ 64 <19200000>;
+			required-opps = <&rpmhpd_opp_min_svs>;
+		};
+
+		opp-180000000 {
+			opp-hz = /bits/ 64 <180000000>;
+			required-opps = <&rpmhpd_opp_low_svs>;
+		};
+
+		opp-275000000 {
+			opp-hz = /bits/ 64 <275000000>;
+			required-opps = <&rpmhpd_opp_svs>;
+		};
+
+		opp-328580000 {
+			opp-hz = /bits/ 64 <328580000>;
+			required-opps = <&rpmhpd_opp_svs_l1>;
+		};
+
+		opp-358000000 {
+			opp-hz = /bits/ 64 <358000000>;
+			required-opps = <&rpmhpd_opp_nom>;
+		};
+	};
+
+	qspi_opp_table: opp-table-qspi {
+		compatible = "operating-points-v2";
+
+		opp-19200000 {
+			opp-hz = /bits/ 64 <19200000>;
+			required-opps = <&rpmhpd_opp_min_svs>;
+		};
+
+		opp-100000000 {
+			opp-hz = /bits/ 64 <100000000>;
+			required-opps = <&rpmhpd_opp_low_svs>;
+		};
+
+		opp-150000000 {
+			opp-hz = /bits/ 64 <150000000>;
+			required-opps = <&rpmhpd_opp_svs>;
+		};
+
+		opp-300000000 {
+			opp-hz = /bits/ 64 <300000000>;
+			required-opps = <&rpmhpd_opp_nom>;
+		};
+	};
+
+	qup_opp_table: opp-table-qup {
+		compatible = "operating-points-v2";
+
+		opp-50000000 {
+			opp-hz = /bits/ 64 <50000000>;
+			required-opps = <&rpmhpd_opp_min_svs>;
+		};
+
+		opp-75000000 {
+			opp-hz = /bits/ 64 <75000000>;
+			required-opps = <&rpmhpd_opp_low_svs>;
+		};
+
+		opp-100000000 {
+			opp-hz = /bits/ 64 <100000000>;
+			required-opps = <&rpmhpd_opp_svs>;
+		};
+
+		opp-128000000 {
+			opp-hz = /bits/ 64 <128000000>;
+			required-opps = <&rpmhpd_opp_nom>;
+		};
+	};
+
 	pmu {
 		compatible = "arm,armv8-pmuv3";
 		interrupts = <GIC_PPI 5 IRQ_TYPE_LEVEL_HIGH>;
@@ -1125,30 +1202,6 @@  rng: rng@793000 {
 			clock-names = "core";
 		};
 
-		qup_opp_table: opp-table-qup {
-			compatible = "operating-points-v2";
-
-			opp-50000000 {
-				opp-hz = /bits/ 64 <50000000>;
-				required-opps = <&rpmhpd_opp_min_svs>;
-			};
-
-			opp-75000000 {
-				opp-hz = /bits/ 64 <75000000>;
-				required-opps = <&rpmhpd_opp_low_svs>;
-			};
-
-			opp-100000000 {
-				opp-hz = /bits/ 64 <100000000>;
-				required-opps = <&rpmhpd_opp_svs>;
-			};
-
-			opp-128000000 {
-				opp-hz = /bits/ 64 <128000000>;
-				required-opps = <&rpmhpd_opp_nom>;
-			};
-		};
-
 		gpi_dma0: dma-controller@800000 {
 			#dma-cells = <3>;
 			compatible = "qcom,sdm845-gpi-dma";
@@ -3807,30 +3860,6 @@  opp-201500000 {
 			};
 		};
 
-		qspi_opp_table: opp-table-qspi {
-			compatible = "operating-points-v2";
-
-			opp-19200000 {
-				opp-hz = /bits/ 64 <19200000>;
-				required-opps = <&rpmhpd_opp_min_svs>;
-			};
-
-			opp-100000000 {
-				opp-hz = /bits/ 64 <100000000>;
-				required-opps = <&rpmhpd_opp_low_svs>;
-			};
-
-			opp-150000000 {
-				opp-hz = /bits/ 64 <150000000>;
-				required-opps = <&rpmhpd_opp_svs>;
-			};
-
-			opp-300000000 {
-				opp-hz = /bits/ 64 <300000000>;
-				required-opps = <&rpmhpd_opp_nom>;
-			};
-		};
-
 		qspi: spi@88df000 {
 			compatible = "qcom,sdm845-qspi", "qcom,qspi-v1";
 			reg = <0 0x088df000 0 0x600>;
@@ -4428,35 +4457,6 @@  clock_camcc: clock-controller@ad00000 {
 			clock-names = "bi_tcxo";
 		};
 
-		dsi_opp_table: opp-table-dsi {
-			compatible = "operating-points-v2";
-
-			opp-19200000 {
-				opp-hz = /bits/ 64 <19200000>;
-				required-opps = <&rpmhpd_opp_min_svs>;
-			};
-
-			opp-180000000 {
-				opp-hz = /bits/ 64 <180000000>;
-				required-opps = <&rpmhpd_opp_low_svs>;
-			};
-
-			opp-275000000 {
-				opp-hz = /bits/ 64 <275000000>;
-				required-opps = <&rpmhpd_opp_svs>;
-			};
-
-			opp-328580000 {
-				opp-hz = /bits/ 64 <328580000>;
-				required-opps = <&rpmhpd_opp_svs_l1>;
-			};
-
-			opp-358000000 {
-				opp-hz = /bits/ 64 <358000000>;
-				required-opps = <&rpmhpd_opp_nom>;
-			};
-		};
-
 		mdss: mdss@ae00000 {
 			compatible = "qcom,sdm845-mdss";
 			reg = <0 0x0ae00000 0 0x1000>;