diff mbox series

[2/6] arm64: dts: qcom: sc8280xp: disable sound nodes

Message ID 20230102105038.8074-3-johan+linaro@kernel.org
State New
Headers show
Series arm64: dts: qcom: disable x13s sound + cleanups | expand

Commit Message

Johan Hovold Jan. 2, 2023, 10:50 a.m. UTC
The sound nodes in the SoC dtsi should be disabled by default.

Signed-off-by: Johan Hovold <johan+linaro@kernel.org>
---
 arch/arm64/boot/dts/qcom/sc8280xp.dtsi | 16 ++++++++++++++++
 1 file changed, 16 insertions(+)
diff mbox series

Patch

diff --git a/arch/arm64/boot/dts/qcom/sc8280xp.dtsi b/arch/arm64/boot/dts/qcom/sc8280xp.dtsi
index ed1e2bee86ee..c1ce2d7b3675 100644
--- a/arch/arm64/boot/dts/qcom/sc8280xp.dtsi
+++ b/arch/arm64/boot/dts/qcom/sc8280xp.dtsi
@@ -1733,6 +1733,8 @@  rxmacro: rxmacro@3200000 {
 
 			pinctrl-names = "default";
 			pinctrl-0 = <&rx_swr_default>;
+
+			status = "disabled";
 		};
 
 		/* RX */
@@ -1760,6 +1762,8 @@  swr1: soundwire-controller@3210000 {
 			#sound-dai-cells = <1>;
 			#address-cells = <2>;
 			#size-cells = <0>;
+
+			status = "disabled";
 		};
 
 		txmacro: txmacro@3220000 {
@@ -1783,6 +1787,8 @@  txmacro: txmacro@3220000 {
 			#address-cells = <2>;
 			#size-cells = <2>;
 			#sound-dai-cells = <1>;
+
+			status = "disabled";
 		};
 
 		wsamacro: codec@3240000 {
@@ -1804,6 +1810,8 @@  wsamacro: codec@3240000 {
 
 			pinctrl-names = "default";
 			pinctrl-0 = <&wsa_swr_default>;
+
+			status = "disabled";
 		};
 
 		/* WSA */
@@ -1830,6 +1838,8 @@  swr0: soundwire-controller@3250000 {
 			#sound-dai-cells = <1>;
 			#address-cells = <2>;
 			#size-cells = <0>;
+
+			status = "disabled";
 		};
 
 		/* TX */
@@ -1858,6 +1868,8 @@  swr2: soundwire-controller@3330000 {
 			qcom,ports-word-length =	/bits/ 8 <0xff 0x00 0xff 0xff>;
 			qcom,ports-block-group-count =	/bits/ 8 <0xff 0xff 0xff 0xff>;
 			qcom,ports-lane-control =	/bits/ 8 <0x00 0x01 0x00 0x00>;
+
+			status = "disabled";
 		};
 
 		vamacro: codec@3370000 {
@@ -1874,6 +1886,8 @@  vamacro: codec@3370000 {
 			#clock-cells = <0>;
 			clock-output-names = "fsgen";
 			#sound-dai-cells = <1>;
+
+			status = "disabled";
 		};
 
 		lpass_tlmm: pinctrl@33c0000 {
@@ -1888,6 +1902,8 @@  lpass_tlmm: pinctrl@33c0000 {
 				 <&q6prmcc LPASS_HW_DCODEC_VOTE LPASS_CLK_ATTRIBUTE_COUPLE_NO>;
 			clock-names = "core", "audio";
 
+			status = "disabled";
+
 			tx_swr_default: tx-swr-default-state {
 				clk-pins {
 					pins = "gpio0";