diff mbox series

[v4,08/12] arm64: dts: qcom: sm8550: add port subnodes in dwc3 node

Message ID 20230130-topic-sm8450-upstream-pmic-glink-v4-8-38bf0f5d07bd@linaro.org
State Superseded
Headers show
Series soc: qcom: add UCSI function to PMIC GLINK | expand

Commit Message

Neil Armstrong March 17, 2023, 3:04 p.m. UTC 
Add ports subnodes in dwc3 node to avoid repeating the
same description in each board DT.

Reviewed-by: Konrad Dybcio <konrad.dybcio@linaro.org>
Signed-off-by: Neil Armstrong <neil.armstrong@linaro.org>
---
 arch/arm64/boot/dts/qcom/sm8550.dtsi | 19 +++++++++++++++++++
 1 file changed, 19 insertions(+)
diff mbox series

Patch

diff --git a/arch/arm64/boot/dts/qcom/sm8550.dtsi b/arch/arm64/boot/dts/qcom/sm8550.dtsi
index 6af4079c9a35..da32f6bc34ab 100644
--- a/arch/arm64/boot/dts/qcom/sm8550.dtsi
+++ b/arch/arm64/boot/dts/qcom/sm8550.dtsi
@@ -2460,6 +2460,25 @@  usb_1_dwc3: usb@a600000 {
 				phys = <&usb_1_hsphy>,
 				       <&usb_dp_qmpphy QMP_USB43DP_USB3_PHY>;
 				phy-names = "usb2-phy", "usb3-phy";
+
+				ports {
+					#address-cells = <1>;
+					#size-cells = <0>;
+
+					port@0 {
+						reg = <0>;
+
+						usb_1_dwc3_hs: endpoint {
+						};
+					};
+
+					port@1 {
+						reg = <1>;
+
+						usb_1_dwc3_ss: endpoint {
+						};
+					};
+				};
 			};
 		};