diff mbox series

[08/16] arm64: dts: qcom: sm8250: Fix the PCI I/O port range

Message ID 20230228164752.55682-9-manivannan.sadhasivam@linaro.org
State Accepted
Commit e115a4495db687898b8d91d4f16c2cf55bbf167c
Headers show
Series Qcom: Fix PCI I/O range defined in devicetree | expand

Commit Message

Manivannan Sadhasivam Feb. 28, 2023, 4:47 p.m. UTC
For 1MiB of the I/O region, the I/O ports of the legacy PCI devices are
located in the range of 0x0 to 0x100000. Hence, fix the bogus PCI addresses
(0x60200000, 0x40200000, 0x64200000) specified in the ranges property for
I/O region.

While at it, let's use the missing 0x prefix for the addresses.

Fixes: e53bdfc00977 ("arm64: dts: qcom: sm8250: Add PCIe support")
Reported-by: Arnd Bergmann <arnd@arndb.de>
Link: https://lore.kernel.org/linux-arm-msm/7c5dfa87-41df-4ba7-b0e4-72c8386402a8@app.fastmail.com/
Signed-off-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org>
---
 arch/arm64/boot/dts/qcom/sm8250.dtsi | 8 ++++----
 1 file changed, 4 insertions(+), 4 deletions(-)
diff mbox series

Patch

diff --git a/arch/arm64/boot/dts/qcom/sm8250.dtsi b/arch/arm64/boot/dts/qcom/sm8250.dtsi
index 2f0e460acccd..e592ddcc0f07 100644
--- a/arch/arm64/boot/dts/qcom/sm8250.dtsi
+++ b/arch/arm64/boot/dts/qcom/sm8250.dtsi
@@ -1834,8 +1834,8 @@  pcie0: pci@1c00000 {
 			#address-cells = <3>;
 			#size-cells = <2>;
 
-			ranges = <0x01000000 0x0 0x60200000 0 0x60200000 0x0 0x100000>,
-				 <0x02000000 0x0 0x60300000 0 0x60300000 0x0 0x3d00000>;
+			ranges = <0x01000000 0x0 0x00000000 0x0 0x60200000 0x0 0x100000>,
+				 <0x02000000 0x0 0x60300000 0x0 0x60300000 0x0 0x3d00000>;
 
 			interrupts = <GIC_SPI 141 IRQ_TYPE_LEVEL_HIGH>,
 				     <GIC_SPI 142 IRQ_TYPE_LEVEL_HIGH>,
@@ -1943,7 +1943,7 @@  pcie1: pci@1c08000 {
 			#address-cells = <3>;
 			#size-cells = <2>;
 
-			ranges = <0x01000000 0x0 0x40200000 0x0 0x40200000 0x0 0x100000>,
+			ranges = <0x01000000 0x0 0x00000000 0x0 0x40200000 0x0 0x100000>,
 				 <0x02000000 0x0 0x40300000 0x0 0x40300000 0x0 0x1fd00000>;
 
 			interrupts = <GIC_SPI 307 IRQ_TYPE_LEVEL_HIGH>;
@@ -2051,7 +2051,7 @@  pcie2: pci@1c10000 {
 			#address-cells = <3>;
 			#size-cells = <2>;
 
-			ranges = <0x01000000 0x0 0x64200000 0x0 0x64200000 0x0 0x100000>,
+			ranges = <0x01000000 0x0 0x00000000 0x0 0x64200000 0x0 0x100000>,
 				 <0x02000000 0x0 0x64300000 0x0 0x64300000 0x0 0x3d00000>;
 
 			interrupts = <GIC_SPI 243 IRQ_TYPE_LEVEL_HIGH>;