diff mbox series

[2/8] usb: dwc3: core: Access XHCI address space temporarily to read port info

Message ID 20230310163420.7582-3-quic_kriskura@quicinc.com
State New
Headers show
Series Add multiport support for DWC3 controllers | expand

Commit Message

Krishna Kurapati March 10, 2023, 4:34 p.m. UTC
Currently host-only capable DWC3 controllers support Multiport. Temporarily
map XHCI address space for host-only controllers and parse XHCI Extended
Capabilities registers to read number of physical usb ports connected to the
multiport controller (presuming each port is at least HS capable) and extract
info on how many of these ports are Super Speed capable.

Signed-off-by: Krishna Kurapati <quic_kriskura@quicinc.com>
---
 drivers/usb/dwc3/core.c | 75 +++++++++++++++++++++++++++++++++++++++++
 drivers/usb/dwc3/core.h |  9 +++++
 2 files changed, 84 insertions(+)
diff mbox series

Patch

diff --git a/drivers/usb/dwc3/core.c b/drivers/usb/dwc3/core.c
index 476b63618511..076c0f8a4441 100644
--- a/drivers/usb/dwc3/core.c
+++ b/drivers/usb/dwc3/core.c
@@ -37,6 +37,7 @@ 
 #include "core.h"
 #include "gadget.h"
 #include "io.h"
+#include "../host/xhci.h"
 
 #include "debug.h"
 
@@ -1750,6 +1751,65 @@  static struct extcon_dev *dwc3_get_extcon(struct dwc3 *dwc)
 	return edev;
 }
 
+static int dwc3_read_port_info(struct dwc3 *dwc, struct resource *res)
+{
+	void __iomem		*regs;
+	struct resource         dwc_res;
+	u32			offset;
+	u32			temp;
+	u8			major_revision;
+	int			ret = 0;
+
+	/*
+	 * Remap xHCI address space to access XHCI ext cap regs,
+	 * since it is needed to get port info.
+	 */
+	dwc_res = *res;
+	dwc_res.start += 0;
+	dwc_res.end = dwc->xhci_resources[0].start +
+				DWC3_XHCI_REGS_END;
+
+	regs = ioremap(dwc_res.start, resource_size(&dwc_res));
+	if (IS_ERR(regs))
+		return PTR_ERR(regs);
+
+	offset = xhci_find_next_ext_cap(regs, 0,
+					XHCI_EXT_CAPS_PROTOCOL);
+	while (offset) {
+		temp = readl(regs + offset);
+		major_revision = XHCI_EXT_PORT_MAJOR(temp);
+
+		temp = readl(regs + offset + 0x08);
+		if (major_revision == 0x03) {
+			dwc->num_ss_ports += XHCI_EXT_PORT_COUNT(temp);
+		} else if (major_revision <= 0x02) {
+			dwc->num_ports += XHCI_EXT_PORT_COUNT(temp);
+		} else {
+			dev_err(dwc->dev, "port revision seems wrong\n");
+			ret = -EINVAL;
+			goto unmap_reg;
+		}
+
+		offset = xhci_find_next_ext_cap(regs, offset,
+						XHCI_EXT_CAPS_PROTOCOL);
+	}
+
+	temp = readl(regs + DWC3_XHCI_HCSPARAMS1);
+	if (HCS_MAX_PORTS(temp) != (dwc->num_ss_ports + dwc->num_ports)) {
+		dev_err(dwc->dev, "inconsistency in port info\n");
+		ret = -EINVAL;
+		goto unmap_reg;
+	}
+
+	dev_info(dwc->dev,
+		"num-ports: %d ss-capable: %d\n", dwc->num_ports, dwc->num_ss_ports);
+
+unmap_reg:
+	iounmap(regs);
+	return ret;
+}
+
 static int dwc3_probe(struct platform_device *pdev)
 {
 	struct device		*dev = &pdev->dev;
@@ -1757,6 +1817,7 @@  static int dwc3_probe(struct platform_device *pdev)
 	struct dwc3		*dwc;
 
 	int			ret;
+	unsigned int		hw_mode;
 
 	void __iomem		*regs;
 
@@ -1880,6 +1941,20 @@  static int dwc3_probe(struct platform_device *pdev)
 			goto disable_clks;
 	}
 
+	/*
+	 * Currently DWC3 controllers that are host-only capable
+	 * support Multiport.
+	 */
+	hw_mode = DWC3_GHWPARAMS0_MODE(dwc->hwparams.hwparams0);
+	if (hw_mode == DWC3_GHWPARAMS0_MODE_HOST) {
+		ret = dwc3_read_port_info(dwc, res);
+		if (ret)
+			goto disable_clks;
+	} else {
+		dwc->num_ports = 1;
+		dwc->num_ss_ports = 1;
+	}
+
 	spin_lock_init(&dwc->lock);
 	mutex_init(&dwc->mutex);
 
diff --git a/drivers/usb/dwc3/core.h b/drivers/usb/dwc3/core.h
index 582ebd9cf9c2..74386d6a0277 100644
--- a/drivers/usb/dwc3/core.h
+++ b/drivers/usb/dwc3/core.h
@@ -35,6 +35,9 @@ 
 
 #define DWC3_MSG_MAX	500
 
+/* XHCI Reg constants */
+#define DWC3_XHCI_HCSPARAMS1	0x04
+
 /* Global constants */
 #define DWC3_PULL_UP_TIMEOUT	500	/* ms */
 #define DWC3_BOUNCE_SIZE	1024	/* size of a superspeed bulk */
@@ -1023,6 +1026,10 @@  struct dwc3_scratchpad_array {
  * @usb_psy: pointer to power supply interface.
  * @usb2_phy: pointer to USB2 PHY
  * @usb3_phy: pointer to USB3 PHY
+ * @num_ports: Indicates the number of physical USB ports present on HW
+ *		presuming each port is at least HS capable
+ * @num_ss_ports: Indicates the number of USB ports present on HW that are
+ *		SS Capable
  * @usb2_generic_phy: pointer to USB2 PHY
  * @usb3_generic_phy: pointer to USB3 PHY
  * @phys_ready: flag to indicate that PHYs are ready
@@ -1158,6 +1165,8 @@  struct dwc3 {
 	struct usb_phy		*usb2_phy;
 	struct usb_phy		*usb3_phy;
 
+	u32			num_ports;
+	u32			num_ss_ports;
 	struct phy		*usb2_generic_phy;
 	struct phy		*usb3_generic_phy;