diff mbox series

[v4,03/18] dt-bindings: phy: qcom,sc7180-qmp-usb3-dp-phy: Add orientation-switch as optional

Message ID 20230318121828.739424-4-bryan.odonoghue@linaro.org
State New
Headers show
Series [v4,01/18] dt-bindings: regulator: qcom,usb-vbus-regulator: Mark reg as required | expand

Commit Message

Bryan O'Donoghue March 18, 2023, 12:18 p.m. UTC
orientation-switch it the standard declaration to inform the Type-C mux
layer that a remote-endpoint is capable of processing orientation change
messages.

Add as an optional since not all versions of the dp-phy currently support
the orientation-switch.

Signed-off-by: Bryan O'Donoghue <bryan.odonoghue@linaro.org>
---
 .../devicetree/bindings/phy/qcom,sc7180-qmp-usb3-dp-phy.yaml  | 4 ++++
 1 file changed, 4 insertions(+)
diff mbox series

Patch

diff --git a/Documentation/devicetree/bindings/phy/qcom,sc7180-qmp-usb3-dp-phy.yaml b/Documentation/devicetree/bindings/phy/qcom,sc7180-qmp-usb3-dp-phy.yaml
index 0ef2c9b9d4669..52886cdb0e506 100644
--- a/Documentation/devicetree/bindings/phy/qcom,sc7180-qmp-usb3-dp-phy.yaml
+++ b/Documentation/devicetree/bindings/phy/qcom,sc7180-qmp-usb3-dp-phy.yaml
@@ -61,6 +61,10 @@  properties:
   power-domains:
     maxItems: 1
 
+  orientation-switch:
+    description: Flag the port as possible handler of orientation switching
+    type: boolean
+
   resets:
     items:
       - description: reset of phy block.