diff mbox series

[v2,01/15] arm64: dts: qcom: sa8775p: pad reg properties to 8 digits

Message ID 20230320154841.327908-2-brgl@bgdev.pl
State Superseded
Headers show
Series arm64: dts: qcom: sa8775p: add basic PMIC support | expand

Commit Message

Bartosz Golaszewski March 20, 2023, 3:48 p.m. UTC
From: Bartosz Golaszewski <bartosz.golaszewski@linaro.org>

The file has inconsistent padding of the address part of soc node
children's reg properties. Fix it.

Signed-off-by: Bartosz Golaszewski <bartosz.golaszewski@linaro.org>
---
 arch/arm64/boot/dts/qcom/sa8775p.dtsi | 12 ++++++------
 1 file changed, 6 insertions(+), 6 deletions(-)
diff mbox series

Patch

diff --git a/arch/arm64/boot/dts/qcom/sa8775p.dtsi b/arch/arm64/boot/dts/qcom/sa8775p.dtsi
index c5b73c591e0f..5aa28a3b12ae 100644
--- a/arch/arm64/boot/dts/qcom/sa8775p.dtsi
+++ b/arch/arm64/boot/dts/qcom/sa8775p.dtsi
@@ -440,7 +440,7 @@  soc: soc@0 {
 
 		gcc: clock-controller@100000 {
 			compatible = "qcom,sa8775p-gcc";
-			reg = <0x0 0x100000 0x0 0xc7018>;
+			reg = <0x0 0x00100000 0x0 0xc7018>;
 			#clock-cells = <1>;
 			#reset-cells = <1>;
 			#power-domain-cells = <1>;
@@ -464,7 +464,7 @@  gcc: clock-controller@100000 {
 
 		ipcc: mailbox@408000 {
 			compatible = "qcom,sa8775p-ipcc", "qcom,ipcc";
-			reg = <0x0 0x408000 0x0 0x1000>;
+			reg = <0x0 0x00408000 0x0 0x1000>;
 			interrupts = <GIC_SPI 229 IRQ_TYPE_LEVEL_HIGH>;
 			interrupt-controller;
 			#interrupt-cells = <3>;
@@ -473,7 +473,7 @@  ipcc: mailbox@408000 {
 
 		qupv3_id_1: geniqup@ac0000 {
 			compatible = "qcom,geni-se-qup";
-			reg = <0x0 0xac0000 0x0 0x6000>;
+			reg = <0x0 0x00ac0000 0x0 0x6000>;
 			#address-cells = <2>;
 			#size-cells = <2>;
 			ranges;
@@ -485,7 +485,7 @@  qupv3_id_1: geniqup@ac0000 {
 
 			uart10: serial@a8c000 {
 				compatible = "qcom,geni-uart";
-				reg = <0x0 0xa8c000 0x0 0x4000>;
+				reg = <0x0 0x00a8c000 0x0 0x4000>;
 				interrupts = <GIC_SPI 356 IRQ_TYPE_LEVEL_HIGH>;
 				clock-names = "se";
 				clocks = <&gcc GCC_QUPV3_WRAP1_S3_CLK>;
@@ -735,7 +735,7 @@  rpmhpd_opp_turbo_l1: opp-9 {
 
 		tcsr_mutex: hwlock@1f40000 {
 			compatible = "qcom,tcsr-mutex";
-			reg = <0x0 0x1f40000 0x0 0x20000>;
+			reg = <0x0 0x01f40000 0x0 0x20000>;
 			#hwlock-cells = <1>;
 		};
 
@@ -754,7 +754,7 @@  cpufreq_hw: cpufreq@18591000 {
 
 		tlmm: pinctrl@f000000 {
 			compatible = "qcom,sa8775p-tlmm";
-			reg = <0x0 0xf000000 0x0 0x1000000>;
+			reg = <0x0 0x0f000000 0x0 0x1000000>;
 			interrupts = <GIC_SPI 208 IRQ_TYPE_LEVEL_HIGH>;
 			gpio-controller;
 			#gpio-cells = <2>;