diff mbox series

[06/11] arm64: dts: qcom: sc7180-trogdor-wormdingler: use just "port" in panel

Message ID 20230326155753.92007-6-krzysztof.kozlowski@linaro.org
State Accepted
Commit c28d9029f3b68a42794a0527696c91f7b31e81f3
Headers show
Series [01/11] arm64: dts: qcom: sdm845-cheza: use just "port" in Innolux panel | expand

Commit Message

Krzysztof Kozlowski March 26, 2023, 3:57 p.m. UTC 
The panel bindings expect to have only one port, thus they do not allow
to use "ports" node:

  sc7180-trogdor-wormdingler-rev1-boe.dtb: panel@0: 'ports' does not match any of the regexes: 'pinctrl-[0-9]+'

Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
---
 .../boot/dts/qcom/sc7180-trogdor-wormdingler.dtsi     | 11 +++--------
 1 file changed, 3 insertions(+), 8 deletions(-)

Comments

Dmitry Baryshkov March 27, 2023, 10:21 a.m. UTC | #1 
On 26/03/2023 18:57, Krzysztof Kozlowski wrote:
> The panel bindings expect to have only one port, thus they do not allow
> to use "ports" node:
> 
>    sc7180-trogdor-wormdingler-rev1-boe.dtb: panel@0: 'ports' does not match any of the regexes: 'pinctrl-[0-9]+'
> 
> Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
> ---
>   .../boot/dts/qcom/sc7180-trogdor-wormdingler.dtsi     | 11 +++--------
>   1 file changed, 3 insertions(+), 8 deletions(-)

Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
diff mbox series

Patch

diff --git a/arch/arm64/boot/dts/qcom/sc7180-trogdor-wormdingler.dtsi b/arch/arm64/boot/dts/qcom/sc7180-trogdor-wormdingler.dtsi
index 9832e752da35..262d6691abd9 100644
--- a/arch/arm64/boot/dts/qcom/sc7180-trogdor-wormdingler.dtsi
+++ b/arch/arm64/boot/dts/qcom/sc7180-trogdor-wormdingler.dtsi
@@ -124,14 +124,9 @@  panel: panel@0 {
 		backlight = <&backlight>;
 		rotation = <270>;
 
-		ports {
-			#address-cells = <1>;
-			#size-cells = <0>;
-			port@0 {
-				reg = <0>;
-				panel_in: endpoint {
-					remote-endpoint = <&dsi0_out>;
-				};
+		port {
+			panel_in: endpoint {
+				remote-endpoint = <&dsi0_out>;
 			};
 		};
 	};