diff mbox series

[RESEND,1/2] regulator: dt-bindings: qcom,rpmh: Correct PM8550 family supplies

Message ID 20230327080626.24200-1-krzysztof.kozlowski@linaro.org
State Superseded
Headers show
Series [RESEND,1/2] regulator: dt-bindings: qcom,rpmh: Correct PM8550 family supplies | expand

Commit Message

Krzysztof Kozlowski March 27, 2023, 8:06 a.m. UTC
PM8550 is different than PM8550VE/VS, because the latter has much
smaller amount of supplies (l1-3 and s1-6) and regulators.  The PM8550
has on the other hand one pin for vdd-l1-l4-l10 supplies.  Correct the
if:then: clause with their supplies.

Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Reviewed-by: Abel Vesa <abel.vesa@linaro.org>
Acked-by: Rob Herring <robh@kernel.org>
---
 .../bindings/regulator/qcom,rpmh-regulator.yaml  | 16 +++++++++++++---
 1 file changed, 13 insertions(+), 3 deletions(-)

Comments

Mark Brown April 18, 2023, 12:18 p.m. UTC | #1
On Mon, 27 Mar 2023 10:06:25 +0200, Krzysztof Kozlowski wrote:
> PM8550 is different than PM8550VE/VS, because the latter has much
> smaller amount of supplies (l1-3 and s1-6) and regulators.  The PM8550
> has on the other hand one pin for vdd-l1-l4-l10 supplies.  Correct the
> if:then: clause with their supplies.
> 
> 

Applied to

   https://git.kernel.org/pub/scm/linux/kernel/git/broonie/regulator.git for-next

Thanks!

[1/2] regulator: dt-bindings: qcom,rpmh: Correct PM8550 family supplies
      commit: 902f8c9830c35cc61a7b3f63003c7246b2bf06ca
[2/2] regulator: dt-bindings: qcom,rpmh: Combine PM6150L and PM8150L if-then
      (no commit info)

All being well this means that it will be integrated into the linux-next
tree (usually sometime in the next 24 hours) and sent to Linus during
the next merge window (or sooner if it is a bug fix), however if
problems are discovered then the patch may be dropped or reverted.

You may get further e-mails resulting from automated or manual testing
and review of the tree, please engage with people reporting problems and
send followup patches addressing any issues that are reported if needed.

If any updates are required or you are submitting further changes they
should be sent as incremental updates against current git, existing
patches will not be replaced.

Please add any relevant lists and maintainers to the CCs when replying
to this mail.

Thanks,
Mark
diff mbox series

Patch

diff --git a/Documentation/devicetree/bindings/regulator/qcom,rpmh-regulator.yaml b/Documentation/devicetree/bindings/regulator/qcom,rpmh-regulator.yaml
index a765837dc069..74e3acf92d21 100644
--- a/Documentation/devicetree/bindings/regulator/qcom,rpmh-regulator.yaml
+++ b/Documentation/devicetree/bindings/regulator/qcom,rpmh-regulator.yaml
@@ -308,19 +308,29 @@  allOf:
         compatible:
           enum:
             - qcom,pm8550-rpmh-regulators
-            - qcom,pm8550ve-rpmh-regulators
-            - qcom,pm8550vs-rpmh-regulators
     then:
       properties:
+        vdd-l1-l4-l10-supply: true
         vdd-l2-l13-l14-supply: true
         vdd-l5-l16-supply: true
         vdd-l6-l7-supply: true
         vdd-l8-l9-supply: true
       patternProperties:
-        "^vdd-l([1-4]|1[0-7])-supply$": true
+        "^vdd-l(3|1[1-7])-supply$": true
         "^vdd-s[1-6]-supply$": true
         "^vdd-bob[1-2]-supply$": true
 
+  - if:
+      properties:
+        compatible:
+          enum:
+            - qcom,pm8550ve-rpmh-regulators
+            - qcom,pm8550vs-rpmh-regulators
+    then:
+      patternProperties:
+        "^vdd-l[1-3]-supply$": true
+        "^vdd-s[1-6]-supply$": true
+
   - if:
       properties:
         compatible: