| Message ID | 20230410181005.25853-3-krzysztof.kozlowski@linaro.org |
|---|---|
| State | Accepted |
| Commit | 033553c04b02b450261f60d5f1b0e5948cd197bb |
| Headers | show |
| Series | [1/3] ARM: dts: qcom: apq8026: remove superfluous "input-enable" | expand |
diff --git a/arch/arm/boot/dts/qcom-msm8974-lge-nexus5-hammerhead.dts b/arch/arm/boot/dts/qcom-msm8974-lge-nexus5-hammerhead.dts index ab35f2d644c0..861695cecf84 100644 --- a/arch/arm/boot/dts/qcom-msm8974-lge-nexus5-hammerhead.dts +++ b/arch/arm/boot/dts/qcom-msm8974-lge-nexus5-hammerhead.dts @@ -592,7 +592,6 @@ mpu6515_pin: mpu6515-state { pins = "gpio73"; function = "gpio"; bias-disable; - input-enable; }; touch_pin: touch-state { @@ -602,7 +601,6 @@ int-pins { drive-strength = <2>; bias-disable; - input-enable; }; reset-pins { diff --git a/arch/arm/boot/dts/qcom-msm8974-sony-xperia-rhine.dtsi b/arch/arm/boot/dts/qcom-msm8974-sony-xperia-rhine.dtsi index d3bec03b126c..68a2f9094e53 100644 --- a/arch/arm/boot/dts/qcom-msm8974-sony-xperia-rhine.dtsi +++ b/arch/arm/boot/dts/qcom-msm8974-sony-xperia-rhine.dtsi @@ -433,7 +433,6 @@ ts_int_pin: touch-int-state { function = "gpio"; drive-strength = <2>; bias-disable; - input-enable; }; sdc1_on: sdc1-on-state { diff --git a/arch/arm/boot/dts/qcom-msm8974pro-oneplus-bacon.dts b/arch/arm/boot/dts/qcom-msm8974pro-oneplus-bacon.dts index 8d2a054d8fee..8230d0e1d95d 100644 --- a/arch/arm/boot/dts/qcom-msm8974pro-oneplus-bacon.dts +++ b/arch/arm/boot/dts/qcom-msm8974pro-oneplus-bacon.dts @@ -461,7 +461,6 @@ int-pins { function = "gpio"; drive-strength = <2>; bias-disable; - input-enable; }; reset-pins { diff --git a/arch/arm/boot/dts/qcom-msm8974pro-samsung-klte.dts b/arch/arm/boot/dts/qcom-msm8974pro-samsung-klte.dts index b9698ffb66ca..eb505d6d7f31 100644 --- a/arch/arm/boot/dts/qcom-msm8974pro-samsung-klte.dts +++ b/arch/arm/boot/dts/qcom-msm8974pro-samsung-klte.dts @@ -704,7 +704,6 @@ hostwake-pins { pins = "gpio75"; function = "gpio"; drive-strength = <16>; - input-enable; }; devwake-pins { @@ -760,14 +759,12 @@ cmd-data-pins { i2c_touchkey_pins: i2c-touchkey-state { pins = "gpio95", "gpio96"; function = "gpio"; - input-enable; bias-pull-up; }; i2c_led_gpioex_pins: i2c-led-gpioex-state { pins = "gpio120", "gpio121"; function = "gpio"; - input-enable; bias-pull-down; }; @@ -781,7 +778,6 @@ gpioex_pin: gpioex-state { wifi_pin: wifi-state { pins = "gpio92"; function = "gpio"; - input-enable; bias-pull-down; }; diff --git a/arch/arm/boot/dts/qcom-msm8974pro-sony-xperia-shinano-castor.dts b/arch/arm/boot/dts/qcom-msm8974pro-sony-xperia-shinano-castor.dts index 04bc58d87abf..0f650ed31005 100644 --- a/arch/arm/boot/dts/qcom-msm8974pro-sony-xperia-shinano-castor.dts +++ b/arch/arm/boot/dts/qcom-msm8974pro-sony-xperia-shinano-castor.dts @@ -631,7 +631,6 @@ ts_int_pin: ts-int-pin-state { function = "gpio"; drive-strength = <2>; bias-disable; - input-enable; }; bt_host_wake_pin: bt-host-wake-state {
Pin configuration property "input-enable" was used with the intention to disable the output, but this is done by default by Linux drivers. Since patch ("dt-bindings: pinctrl: qcom: tlmm should use output-disable, not input-enable") the property is not accepted anymore. Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org> --- arch/arm/boot/dts/qcom-msm8974-lge-nexus5-hammerhead.dts | 2 -- arch/arm/boot/dts/qcom-msm8974-sony-xperia-rhine.dtsi | 1 - arch/arm/boot/dts/qcom-msm8974pro-oneplus-bacon.dts | 1 - arch/arm/boot/dts/qcom-msm8974pro-samsung-klte.dts | 4 ---- .../boot/dts/qcom-msm8974pro-sony-xperia-shinano-castor.dts | 1 - 5 files changed, 9 deletions(-)