@@ -4520,24 +4520,24 @@ static const struct qcom_reset_map gcc_ipq6018_resets[] = {
[GCC_PCIE0_AHB_ARES] = { 0x75040, 5 },
[GCC_PCIE0_AXI_MASTER_STICKY_ARES] = { 0x75040, 6 },
[GCC_PCIE0_AXI_SLAVE_STICKY_ARES] = { 0x75040, 7 },
- [GCC_PPE_FULL_RESET] = { 0x68014, 0 },
- [GCC_UNIPHY0_SOFT_RESET] = { 0x56004, 0 },
+ [GCC_PPE_FULL_RESET] = { .reg = 0x68014, .bitmask = 0xf0000 },
+ [GCC_UNIPHY0_SOFT_RESET] = { .reg = 0x56004, .bitmask = 0x3ff2 },
[GCC_UNIPHY0_XPCS_RESET] = { 0x56004, 2 },
- [GCC_UNIPHY1_SOFT_RESET] = { 0x56104, 0 },
+ [GCC_UNIPHY1_SOFT_RESET] = { .reg = 0x56104, .bitmask = 0x32 },
[GCC_UNIPHY1_XPCS_RESET] = { 0x56104, 2 },
- [GCC_EDMA_HW_RESET] = { 0x68014, 0 },
- [GCC_NSSPORT1_RESET] = { 0x68014, 0 },
- [GCC_NSSPORT2_RESET] = { 0x68014, 0 },
- [GCC_NSSPORT3_RESET] = { 0x68014, 0 },
- [GCC_NSSPORT4_RESET] = { 0x68014, 0 },
- [GCC_NSSPORT5_RESET] = { 0x68014, 0 },
- [GCC_UNIPHY0_PORT1_ARES] = { 0x56004, 0 },
- [GCC_UNIPHY0_PORT2_ARES] = { 0x56004, 0 },
- [GCC_UNIPHY0_PORT3_ARES] = { 0x56004, 0 },
- [GCC_UNIPHY0_PORT4_ARES] = { 0x56004, 0 },
- [GCC_UNIPHY0_PORT5_ARES] = { 0x56004, 0 },
- [GCC_UNIPHY0_PORT_4_5_RESET] = { 0x56004, 0 },
- [GCC_UNIPHY0_PORT_4_RESET] = { 0x56004, 0 },
+ [GCC_EDMA_HW_RESET] = { .reg = 0x68014, .bitmask = 0x300000 },
+ [GCC_NSSPORT1_RESET] = { .reg = 0x68014, .bitmask = 0x1000003 },
+ [GCC_NSSPORT2_RESET] = { .reg = 0x68014, .bitmask = 0x200000c },
+ [GCC_NSSPORT3_RESET] = { .reg = 0x68014, .bitmask = 0x4000030 },
+ [GCC_NSSPORT4_RESET] = { .reg = 0x68014, .bitmask = 0x8000300 },
+ [GCC_NSSPORT5_RESET] = { .reg = 0x68014, .bitmask = 0x10000c00 },
+ [GCC_UNIPHY0_PORT1_ARES] = { .reg = 0x56004, .bitmask = 0x30 },
+ [GCC_UNIPHY0_PORT2_ARES] = { .reg = 0x56004, .bitmask = 0xc0 },
+ [GCC_UNIPHY0_PORT3_ARES] = { .reg = 0x56004, .bitmask = 0x300 },
+ [GCC_UNIPHY0_PORT4_ARES] = { .reg = 0x56004, .bitmask = 0xc00 },
+ [GCC_UNIPHY0_PORT5_ARES] = { .reg = 0x56004, .bitmask = 0x3000 },
+ [GCC_UNIPHY0_PORT_4_5_RESET] = { .reg = 0x56004, .bitmask = 0x3c02 },
+ [GCC_UNIPHY0_PORT_4_RESET] = { .reg = 0x56004, .bitmask = 0xc02 },
[GCC_LPASS_BCR] = {0x1F000, 0},
[GCC_UBI32_TBU_BCR] = {0x65000, 0},
[GCC_LPASS_TBU_BCR] = {0x6C000, 0},
Networking resets in IPQ6018 all use bitmask as they require multiple bits to be set and cleared instead of a single bit. So, current networking resets have the same register and bit 0 set which is clearly incorrect. Fixes: d9db07f088af ("clk: qcom: Add ipq6018 Global Clock Controller support") Signed-off-by: Robert Marko <robimarko@gmail.com> --- drivers/clk/qcom/gcc-ipq6018.c | 32 ++++++++++++++++---------------- 1 file changed, 16 insertions(+), 16 deletions(-)