@@ -164,21 +164,6 @@ &camss {
vdda-supply = <&vreg_l2a_1p25>;
};
-&dsi0 {
- vdda-supply = <&vreg_l2a_1p25>;
- vcca-supply = <&vreg_l22a_3p0>;
- status = "okay";
-};
-
-&dsi0_out {
- data-lanes = <0 1 2 3>;
-};
-
-&dsi0_phy {
- vcca-supply = <&vreg_l28a_0p925>;
- status = "okay";
-};
-
&hsusb_phy1 {
vdd-supply = <&vreg_l28a_0p925>;
vdda-pll-supply = <&vreg_l12a_1p8>;
@@ -201,6 +186,21 @@ &mdss {
status = "okay";
};
+&mdss_dsi0 {
+ vdda-supply = <&vreg_l2a_1p25>;
+ vcca-supply = <&vreg_l22a_3p0>;
+ status = "okay";
+};
+
+&mdss_dsi0_out {
+ data-lanes = <0 1 2 3>;
+};
+
+&mdss_dsi0_phy {
+ vcca-supply = <&vreg_l28a_0p925>;
+ status = "okay";
+};
+
&mmcc {
vdd-gfx-supply = <&vdd_gfx>;
};
@@ -235,7 +235,15 @@ bluetooth: bluetooth {
};
};
-&dsi0 {
+&gpu {
+ status = "okay";
+};
+
+&mdss {
+ status = "okay";
+};
+
+&mdss_dsi0 {
status = "okay";
vdd-supply = <&vreg_l2a_1p25>;
@@ -246,26 +254,18 @@ &dsi0 {
pinctrl-1 = <&mdss_dsi_sleep &mdss_te_sleep>;
};
-&dsi0_out {
+&mdss_dsi0_out {
status = "okay";
data-lanes = <0 1 2 3>;
};
-&dsi0_phy {
+&mdss_dsi0_phy {
status = "okay";
vcca-supply = <&vreg_l28a_0p925>;
};
-&gpu {
- status = "okay";
-};
-
-&mdss {
- status = "okay";
-};
-
&mmcc {
vdd-gfx-supply = <&vdd_gfx>;
};
@@ -93,7 +93,13 @@ synaptics@20 {
};
-&dsi0 {
+&gpu {
+ zap-shader {
+ firmware-name = "qcom/msm8996/gemini/a530_zap.mbn";
+ };
+};
+
+&mdss_dsi0 {
status = "okay";
vdd-supply = <&vreg_l2a_1p25>;
@@ -112,22 +118,16 @@ panel: panel@0 {
port {
panel_in: endpoint {
- remote-endpoint = <&dsi0_out>;
+ remote-endpoint = <&mdss_dsi0_out>;
};
};
};
};
-&dsi0_out {
+&mdss_dsi0_out {
remote-endpoint = <&panel_in>;
};
-&gpu {
- zap-shader {
- firmware-name = "qcom/msm8996/gemini/a530_zap.mbn";
- };
-};
-
&pmi8994_wled {
status = "okay";
};
@@ -891,10 +891,10 @@ mmcc: clock-controller@8c0000 {
clocks = <&xo_board>,
<&gcc GPLL0>,
<&gcc GCC_MMSS_NOC_CFG_AHB_CLK>,
- <&dsi0_phy 1>,
- <&dsi0_phy 0>,
- <&dsi1_phy 1>,
- <&dsi1_phy 0>,
+ <&mdss_dsi0_phy 1>,
+ <&mdss_dsi0_phy 0>,
+ <&mdss_dsi1_phy 1>,
+ <&mdss_dsi1_phy 0>,
<&hdmi_phy>;
clock-names = "xo",
"gpll0",
@@ -987,20 +987,20 @@ mdp5_intf3_out: endpoint {
port@1 {
reg = <1>;
mdp5_intf1_out: endpoint {
- remote-endpoint = <&dsi0_in>;
+ remote-endpoint = <&mdss_dsi0_in>;
};
};
port@2 {
reg = <2>;
mdp5_intf2_out: endpoint {
- remote-endpoint = <&dsi1_in>;
+ remote-endpoint = <&mdss_dsi1_in>;
};
};
};
};
- dsi0: dsi@994000 {
+ mdss_dsi0: dsi@994000 {
compatible = "qcom,msm8996-dsi-ctrl",
"qcom,mdss-dsi-ctrl";
reg = <0x00994000 0x400>;
@@ -1024,9 +1024,9 @@ dsi0: dsi@994000 {
"pixel",
"core";
assigned-clocks = <&mmcc BYTE0_CLK_SRC>, <&mmcc PCLK0_CLK_SRC>;
- assigned-clock-parents = <&dsi0_phy 0>, <&dsi0_phy 1>;
+ assigned-clock-parents = <&mdss_dsi0_phy 0>, <&mdss_dsi0_phy 1>;
- phys = <&dsi0_phy>;
+ phys = <&mdss_dsi0_phy>;
status = "disabled";
#address-cells = <1>;
@@ -1038,20 +1038,20 @@ ports {
port@0 {
reg = <0>;
- dsi0_in: endpoint {
+ mdss_dsi0_in: endpoint {
remote-endpoint = <&mdp5_intf1_out>;
};
};
port@1 {
reg = <1>;
- dsi0_out: endpoint {
+ mdss_dsi0_out: endpoint {
};
};
};
};
- dsi0_phy: phy@994400 {
+ mdss_dsi0_phy: phy@994400 {
compatible = "qcom,dsi-phy-14nm";
reg = <0x00994400 0x100>,
<0x00994500 0x300>,
@@ -1068,7 +1068,7 @@ dsi0_phy: phy@994400 {
status = "disabled";
};
- dsi1: dsi@996000 {
+ mdss_dsi1: dsi@996000 {
compatible = "qcom,msm8996-dsi-ctrl",
"qcom,mdss-dsi-ctrl";
reg = <0x00996000 0x400>;
@@ -1092,9 +1092,9 @@ dsi1: dsi@996000 {
"pixel",
"core";
assigned-clocks = <&mmcc BYTE1_CLK_SRC>, <&mmcc PCLK1_CLK_SRC>;
- assigned-clock-parents = <&dsi1_phy 0>, <&dsi1_phy 1>;
+ assigned-clock-parents = <&mdss_dsi1_phy 0>, <&mdss_dsi1_phy 1>;
- phys = <&dsi1_phy>;
+ phys = <&mdss_dsi1_phy>;
status = "disabled";
#address-cells = <1>;
@@ -1106,20 +1106,20 @@ ports {
port@0 {
reg = <0>;
- dsi1_in: endpoint {
+ mdss_dsi1_in: endpoint {
remote-endpoint = <&mdp5_intf2_out>;
};
};
port@1 {
reg = <1>;
- dsi1_out: endpoint {
+ mdss_dsi1_out: endpoint {
};
};
};
};
- dsi1_phy: phy@996400 {
+ mdss_dsi1_phy: phy@996400 {
compatible = "qcom,dsi-phy-14nm";
reg = <0x00996400 0x100>,
<0x00996500 0x300>,
@@ -39,7 +39,13 @@ touchscreen@20 {
};
};
-&dsi0 {
+&gpu {
+ zap-shader {
+ firmware-name = "qcom/msm8996/natrium/a530_zap.mbn";
+ };
+};
+
+&mdss_dsi0 {
status = "okay";
vdda-supply = <&vreg_l2a_1p25>;
@@ -57,22 +63,16 @@ panel: panel@0 {
port {
panel_in: endpoint {
- remote-endpoint = <&dsi0_out>;
+ remote-endpoint = <&mdss_dsi0_out>;
};
};
};
};
-&dsi0_out {
+&mdss_dsi0_out {
remote-endpoint = <&panel_in>;
};
-&gpu {
- zap-shader {
- firmware-name = "qcom/msm8996/natrium/a530_zap.mbn";
- };
-};
-
&mss_pil {
firmware-name = "qcom/msm8996/natrium/mba.mbn",
"qcom/msm8996/natrium/modem.mbn";
Currently in board files MDSS and DSI nodes stay apart, because labels for DSI nodes do not have the mdss_ prefix. It was found that grouping all display-related notes is more useful. To keep all display-related nodes close in the board files, change DSI node labels from dsi_* to mdss_dsi_*. Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org> --- .../boot/dts/qcom/msm8996-oneplus-common.dtsi | 30 ++++++++-------- .../boot/dts/qcom/msm8996-xiaomi-common.dtsi | 22 ++++++------ .../boot/dts/qcom/msm8996-xiaomi-gemini.dts | 18 +++++----- arch/arm64/boot/dts/qcom/msm8996.dtsi | 36 +++++++++---------- .../dts/qcom/msm8996pro-xiaomi-natrium.dts | 18 +++++----- 5 files changed, 62 insertions(+), 62 deletions(-)