From patchwork Wed Jun 14 08:50:39 2023 Content-Type: text/plain; charset="utf-8" MIME-Version: 1.0 Content-Transfer-Encoding: 7bit X-Patchwork-Submitter: Anusha Canchi X-Patchwork-Id: 692690 Return-Path: X-Spam-Checker-Version: SpamAssassin 3.4.0 (2014-02-07) on aws-us-west-2-korg-lkml-1.web.codeaurora.org Received: from vger.kernel.org (vger.kernel.org [23.128.96.18]) by smtp.lore.kernel.org (Postfix) with ESMTP id 0D9ABEB64DB for ; Wed, 14 Jun 2023 08:51:49 +0000 (UTC) Received: (majordomo@vger.kernel.org) by vger.kernel.org via listexpand id S243858AbjFNIvr (ORCPT ); Wed, 14 Jun 2023 04:51:47 -0400 Received: from lindbergh.monkeyblade.net ([23.128.96.19]:42542 "EHLO lindbergh.monkeyblade.net" rhost-flags-OK-OK-OK-OK) by vger.kernel.org with ESMTP id S243790AbjFNIv2 (ORCPT ); Wed, 14 Jun 2023 04:51:28 -0400 Received: from mx0b-0031df01.pphosted.com (mx0b-0031df01.pphosted.com [205.220.180.131]) by lindbergh.monkeyblade.net (Postfix) with ESMTPS id 51A871FD0; Wed, 14 Jun 2023 01:51:21 -0700 (PDT) Received: from pps.filterd (m0279871.ppops.net [127.0.0.1]) by mx0a-0031df01.pphosted.com (8.17.1.19/8.17.1.19) with ESMTP id 35E4mqPr008448; Wed, 14 Jun 2023 08:51:11 GMT DKIM-Signature: v=1; a=rsa-sha256; c=relaxed/relaxed; d=quicinc.com; h=from : to : cc : subject : date : message-id : in-reply-to : references : mime-version : content-type; s=qcppdkim1; bh=10lR0iDjQOvoiKBVYPwgoiPdV3NYL/so1Q4ESNGAQl4=; b=pgY64F7mMh2Vlzk7H4tTfqhi1kmJAKeLLGOyPkDdg+PT6DBNSZOyHjPZnJnPojifZ4RU l2vtUFKSotqLWR1VnyLNmgq7+gWoxvWT/9kDmUNeU8N2TN21w/xkr2x9ROvbwTcgy+n3 MzZwZ8y8jlZ9TO5F6eXEFXeutjgx0ja8t0QhsgqlBC8gyDlDnOhkjQltVlCDsUwwW+3t nubCRe5X5SJsxMIldPe0IywwoN2baFZX2uynmts0erQUgBqqhiUz0BcoiFAMI0frhN0l lW3h3JlbOMn2mbNTW8y+pTGEhZCB2yTnrlpsHUgcdAVDQ5R3Jr2EiKFHhe7KeYo675n0 tg== Received: from nalasppmta04.qualcomm.com (Global_NAT1.qualcomm.com [129.46.96.20]) by mx0a-0031df01.pphosted.com (PPS) with ESMTPS id 3r6f7a3cg4-1 (version=TLSv1.2 cipher=ECDHE-RSA-AES256-GCM-SHA384 bits=256 verify=NOT); Wed, 14 Jun 2023 08:51:10 +0000 Received: from nalasex01a.na.qualcomm.com (nalasex01a.na.qualcomm.com [10.47.209.196]) by NALASPPMTA04.qualcomm.com (8.17.1.5/8.17.1.5) with ESMTPS id 35E8p9Ka001256 (version=TLSv1.2 cipher=ECDHE-RSA-AES256-GCM-SHA384 bits=256 verify=NOT); Wed, 14 Jun 2023 08:51:09 GMT Received: from anusha-linux.qualcomm.com (10.80.80.8) by nalasex01a.na.qualcomm.com (10.47.209.196) with Microsoft SMTP Server (version=TLS1_2, cipher=TLS_ECDHE_RSA_WITH_AES_256_GCM_SHA384) id 15.2.986.42; Wed, 14 Jun 2023 01:51:04 -0700 From: Anusha Rao To: , , , , , , , , CC: , , , , , Subject: [PATCH 1/2] arm64: dts: qcom: ipq9574: Add common RDP dtsi file Date: Wed, 14 Jun 2023 14:20:39 +0530 Message-ID: <20230614085040.22071-2-quic_anusha@quicinc.com> X-Mailer: git-send-email 2.17.1 In-Reply-To: <20230614085040.22071-1-quic_anusha@quicinc.com> References: <20230614085040.22071-1-quic_anusha@quicinc.com> MIME-Version: 1.0 X-Originating-IP: [10.80.80.8] X-ClientProxiedBy: nasanex01a.na.qualcomm.com (10.52.223.231) To nalasex01a.na.qualcomm.com (10.47.209.196) X-QCInternal: smtphost X-Proofpoint-Virus-Version: vendor=nai engine=6200 definitions=5800 signatures=585085 X-Proofpoint-GUID: gZuSkaSsUmlX8uqsjl6QW2AVBJYWBRi3 X-Proofpoint-ORIG-GUID: gZuSkaSsUmlX8uqsjl6QW2AVBJYWBRi3 X-Proofpoint-Virus-Version: vendor=baseguard engine=ICAP:2.0.254,Aquarius:18.0.957,Hydra:6.0.573,FMLib:17.11.176.26 definitions=2023-06-14_05,2023-06-12_02,2023-05-22_02 X-Proofpoint-Spam-Details: rule=outbound_notspam policy=outbound score=0 lowpriorityscore=0 mlxlogscore=999 clxscore=1015 priorityscore=1501 phishscore=0 adultscore=0 impostorscore=0 bulkscore=0 malwarescore=0 mlxscore=0 spamscore=0 suspectscore=0 classifier=spam adjust=0 reason=mlx scancount=1 engine=8.12.0-2305260000 definitions=main-2306140074 Precedence: bulk List-ID: X-Mailing-List: linux-arm-msm@vger.kernel.org Add a dtsi file to include interfaces that are common across RDPs. Signed-off-by: Anusha Rao --- .../boot/dts/qcom/ipq9574-rdp-common.dtsi | 121 ++++++++++++++++++ arch/arm64/boot/dts/qcom/ipq9574-rdp418.dts | 107 +--------------- arch/arm64/boot/dts/qcom/ipq9574-rdp433.dts | 88 +------------ arch/arm64/boot/dts/qcom/ipq9574-rdp449.dts | 65 +--------- arch/arm64/boot/dts/qcom/ipq9574-rdp453.dts | 65 +--------- 5 files changed, 125 insertions(+), 321 deletions(-) create mode 100644 arch/arm64/boot/dts/qcom/ipq9574-rdp-common.dtsi diff --git a/arch/arm64/boot/dts/qcom/ipq9574-rdp-common.dtsi b/arch/arm64/boot/dts/qcom/ipq9574-rdp-common.dtsi new file mode 100644 index 000000000000..999902bc70bd --- /dev/null +++ b/arch/arm64/boot/dts/qcom/ipq9574-rdp-common.dtsi @@ -0,0 +1,121 @@ +// SPDX-License-Identifier: (GPL-2.0+ OR BSD-3-Clause) +/* + * IPQ9574 RDP board common device tree source + * + * Copyright (c) 2020-2021 The Linux Foundation. All rights reserved. + * Copyright (c) 2023, Qualcomm Innovation Center, Inc. All rights reserved. + */ + +/dts-v1/; + +#include "ipq9574.dtsi" + +/ { + aliases { + serial0 = &blsp1_uart2; + }; + + chosen { + stdout-path = "serial0:115200n8"; + }; +}; + +&blsp1_spi0 { + pinctrl-0 = <&spi_0_pins>; + pinctrl-names = "default"; + status = "okay"; + + flash@0 { + compatible = "micron,n25q128a11", "jedec,spi-nor"; + reg = <0>; + #address-cells = <1>; + #size-cells = <1>; + spi-max-frequency = <50000000>; + }; +}; + +&blsp1_uart2 { + pinctrl-0 = <&uart2_pins>; + pinctrl-names = "default"; + status = "okay"; +}; + +&rpm_requests { + regulators { + compatible = "qcom,rpm-mp5496-regulators"; + + ipq9574_s1: s1 { + /* + * During kernel bootup, the SoC runs at 800MHz with 875mV set by the bootloaders. + * During regulator registration, kernel not knowing the initial voltage, + * considers it as zero and brings up the regulators with minimum supported voltage. + * Update the regulator-min-microvolt with SVS voltage of 725mV so that + * the regulators are brought up with 725mV which is sufficient for all the + * corner parts to operate at 800MHz + */ + regulator-min-microvolt = <725000>; + regulator-max-microvolt = <1075000>; + }; + }; +}; + +&sdhc_1 { + pinctrl-0 = <&sdc_default_state>; + pinctrl-names = "default"; + mmc-ddr-1_8v; + mmc-hs200-1_8v; + mmc-hs400-1_8v; + mmc-hs400-enhanced-strobe; + max-frequency = <384000000>; + bus-width = <8>; + status = "okay"; +}; + +&sleep_clk { + clock-frequency = <32000>; +}; + +&tlmm { + sdc_default_state: sdc-default-state { + clk-pins { + pins = "gpio5"; + function = "sdc_clk"; + drive-strength = <8>; + bias-disable; + }; + + cmd-pins { + pins = "gpio4"; + function = "sdc_cmd"; + drive-strength = <8>; + bias-pull-up; + }; + + data-pins { + pins = "gpio0", "gpio1", "gpio2", + "gpio3", "gpio6", "gpio7", + "gpio8", "gpio9"; + function = "sdc_data"; + drive-strength = <8>; + bias-pull-up; + }; + + rclk-pins { + pins = "gpio10"; + function = "sdc_rclk"; + drive-strength = <8>; + bias-pull-down; + }; + }; + + spi_0_pins: spi-0-state { + pins = "gpio11", "gpio12", "gpio13", "gpio14"; + function = "blsp0_spi"; + drive-strength = <8>; + bias-disable; + }; +}; + +&xo_board_clk { + clock-frequency = <24000000>; +}; diff --git a/arch/arm64/boot/dts/qcom/ipq9574-rdp418.dts b/arch/arm64/boot/dts/qcom/ipq9574-rdp418.dts index 2b093e02637b..924e4c50101a 100644 --- a/arch/arm64/boot/dts/qcom/ipq9574-rdp418.dts +++ b/arch/arm64/boot/dts/qcom/ipq9574-rdp418.dts @@ -8,117 +8,12 @@ /dts-v1/; -#include "ipq9574.dtsi" +#include "ipq9574-rdp-common.dtsi" / { model = "Qualcomm Technologies, Inc. IPQ9574/AP-AL02-C2"; compatible = "qcom,ipq9574-ap-al02-c2", "qcom,ipq9574"; - aliases { - serial0 = &blsp1_uart2; - }; - - chosen { - stdout-path = "serial0:115200n8"; - }; -}; - -&blsp1_spi0 { - pinctrl-0 = <&spi_0_pins>; - pinctrl-names = "default"; - status = "okay"; - - flash@0 { - compatible = "micron,n25q128a11", "jedec,spi-nor"; - reg = <0>; - #address-cells = <1>; - #size-cells = <1>; - spi-max-frequency = <50000000>; - }; -}; - -&blsp1_uart2 { - pinctrl-0 = <&uart2_pins>; - pinctrl-names = "default"; - status = "okay"; }; -&rpm_requests { - regulators { - compatible = "qcom,rpm-mp5496-regulators"; - - ipq9574_s1: s1 { - /* - * During kernel bootup, the SoC runs at 800MHz with 875mV set by the bootloaders. - * During regulator registration, kernel not knowing the initial voltage, - * considers it as zero and brings up the regulators with minimum supported voltage. - * Update the regulator-min-microvolt with SVS voltage of 725mV so that - * the regulators are brought up with 725mV which is sufficient for all the - * corner parts to operate at 800MHz - */ - regulator-min-microvolt = <725000>; - regulator-max-microvolt = <1075000>; - }; - }; -}; - -&sdhc_1 { - pinctrl-0 = <&sdc_default_state>; - pinctrl-names = "default"; - mmc-ddr-1_8v; - mmc-hs200-1_8v; - mmc-hs400-1_8v; - mmc-hs400-enhanced-strobe; - max-frequency = <384000000>; - bus-width = <8>; - status = "okay"; -}; -&sleep_clk { - clock-frequency = <32000>; -}; - -&tlmm { - sdc_default_state: sdc-default-state { - clk-pins { - pins = "gpio5"; - function = "sdc_clk"; - drive-strength = <8>; - bias-disable; - }; - - cmd-pins { - pins = "gpio4"; - function = "sdc_cmd"; - drive-strength = <8>; - bias-pull-up; - }; - - data-pins { - pins = "gpio0", "gpio1", "gpio2", - "gpio3", "gpio6", "gpio7", - "gpio8", "gpio9"; - function = "sdc_data"; - drive-strength = <8>; - bias-pull-up; - }; - - rclk-pins { - pins = "gpio10"; - function = "sdc_rclk"; - drive-strength = <8>; - bias-pull-down; - }; - }; - - spi_0_pins: spi-0-state { - pins = "gpio11", "gpio12", "gpio13", "gpio14"; - function = "blsp0_spi"; - drive-strength = <8>; - bias-disable; - }; -}; - -&xo_board_clk { - clock-frequency = <24000000>; -}; diff --git a/arch/arm64/boot/dts/qcom/ipq9574-rdp433.dts b/arch/arm64/boot/dts/qcom/ipq9574-rdp433.dts index 2b3ed8d351f7..ae2578ba6980 100644 --- a/arch/arm64/boot/dts/qcom/ipq9574-rdp433.dts +++ b/arch/arm64/boot/dts/qcom/ipq9574-rdp433.dts @@ -8,96 +8,10 @@ /dts-v1/; -#include "ipq9574.dtsi" +#include "ipq9574-rdp-common.dtsi" / { model = "Qualcomm Technologies, Inc. IPQ9574/AP-AL02-C7"; compatible = "qcom,ipq9574-ap-al02-c7", "qcom,ipq9574"; - aliases { - serial0 = &blsp1_uart2; - }; - - chosen { - stdout-path = "serial0:115200n8"; - }; -}; - -&blsp1_uart2 { - pinctrl-0 = <&uart2_pins>; - pinctrl-names = "default"; - status = "okay"; -}; - -&rpm_requests { - regulators { - compatible = "qcom,rpm-mp5496-regulators"; - - ipq9574_s1: s1 { - /* - * During kernel bootup, the SoC runs at 800MHz with 875mV set by the bootloaders. - * During regulator registration, kernel not knowing the initial voltage, - * considers it as zero and brings up the regulators with minimum supported voltage. - * Update the regulator-min-microvolt with SVS voltage of 725mV so that - * the regulators are brought up with 725mV which is sufficient for all the - * corner parts to operate at 800MHz - */ - regulator-min-microvolt = <725000>; - regulator-max-microvolt = <1075000>; - }; - }; -}; - -&sdhc_1 { - pinctrl-0 = <&sdc_default_state>; - pinctrl-names = "default"; - mmc-ddr-1_8v; - mmc-hs200-1_8v; - mmc-hs400-1_8v; - mmc-hs400-enhanced-strobe; - max-frequency = <384000000>; - bus-width = <8>; - status = "okay"; -}; - -&sleep_clk { - clock-frequency = <32000>; -}; - -&tlmm { - sdc_default_state: sdc-default-state { - clk-pins { - pins = "gpio5"; - function = "sdc_clk"; - drive-strength = <8>; - bias-disable; - }; - - cmd-pins { - pins = "gpio4"; - function = "sdc_cmd"; - drive-strength = <8>; - bias-pull-up; - }; - - data-pins { - pins = "gpio0", "gpio1", "gpio2", - "gpio3", "gpio6", "gpio7", - "gpio8", "gpio9"; - function = "sdc_data"; - drive-strength = <8>; - bias-pull-up; - }; - - rclk-pins { - pins = "gpio10"; - function = "sdc_rclk"; - drive-strength = <8>; - bias-pull-down; - }; - }; -}; - -&xo_board_clk { - clock-frequency = <24000000>; }; diff --git a/arch/arm64/boot/dts/qcom/ipq9574-rdp449.dts b/arch/arm64/boot/dts/qcom/ipq9574-rdp449.dts index c8fa54e1a62c..d36d1078763e 100644 --- a/arch/arm64/boot/dts/qcom/ipq9574-rdp449.dts +++ b/arch/arm64/boot/dts/qcom/ipq9574-rdp449.dts @@ -8,73 +8,10 @@ /dts-v1/; -#include "ipq9574.dtsi" +#include "ipq9574-rdp-common.dtsi" / { model = "Qualcomm Technologies, Inc. IPQ9574/AP-AL02-C6"; compatible = "qcom,ipq9574-ap-al02-c6", "qcom,ipq9574"; - aliases { - serial0 = &blsp1_uart2; - }; - - chosen { - stdout-path = "serial0:115200n8"; - }; -}; - -&blsp1_spi0 { - pinctrl-0 = <&spi_0_pins>; - pinctrl-names = "default"; - status = "okay"; - - flash@0 { - compatible = "micron,n25q128a11", "jedec,spi-nor"; - reg = <0>; - #address-cells = <1>; - #size-cells = <1>; - spi-max-frequency = <50000000>; - }; -}; - -&blsp1_uart2 { - pinctrl-0 = <&uart2_pins>; - pinctrl-names = "default"; - status = "okay"; -}; - -&rpm_requests { - regulators { - compatible = "qcom,rpm-mp5496-regulators"; - - ipq9574_s1: s1 { - /* - * During kernel bootup, the SoC runs at 800MHz with 875mV set by the bootloaders. - * During regulator registration, kernel not knowing the initial voltage, - * considers it as zero and brings up the regulators with minimum supported voltage. - * Update the regulator-min-microvolt with SVS voltage of 725mV so that - * the regulators are brought up with 725mV which is sufficient for all the - * corner parts to operate at 800MHz - */ - regulator-min-microvolt = <725000>; - regulator-max-microvolt = <1075000>; - }; - }; -}; - -&sleep_clk { - clock-frequency = <32000>; -}; - -&tlmm { - spi_0_pins: spi-0-state { - pins = "gpio11", "gpio12", "gpio13", "gpio14"; - function = "blsp0_spi"; - drive-strength = <8>; - bias-disable; - }; -}; - -&xo_board_clk { - clock-frequency = <24000000>; }; diff --git a/arch/arm64/boot/dts/qcom/ipq9574-rdp453.dts b/arch/arm64/boot/dts/qcom/ipq9574-rdp453.dts index f01de6628c3b..c30c9fbedf26 100644 --- a/arch/arm64/boot/dts/qcom/ipq9574-rdp453.dts +++ b/arch/arm64/boot/dts/qcom/ipq9574-rdp453.dts @@ -8,73 +8,10 @@ /dts-v1/; -#include "ipq9574.dtsi" +#include "ipq9574-rdp-common.dtsi" / { model = "Qualcomm Technologies, Inc. IPQ9574/AP-AL02-C8"; compatible = "qcom,ipq9574-ap-al02-c8", "qcom,ipq9574"; - aliases { - serial0 = &blsp1_uart2; - }; - - chosen { - stdout-path = "serial0:115200n8"; - }; -}; - -&blsp1_spi0 { - pinctrl-0 = <&spi_0_pins>; - pinctrl-names = "default"; - status = "okay"; - - flash@0 { - compatible = "micron,n25q128a11", "jedec,spi-nor"; - reg = <0>; - #address-cells = <1>; - #size-cells = <1>; - spi-max-frequency = <50000000>; - }; -}; - -&blsp1_uart2 { - pinctrl-0 = <&uart2_pins>; - pinctrl-names = "default"; - status = "okay"; -}; - -&rpm_requests { - regulators { - compatible = "qcom,rpm-mp5496-regulators"; - - ipq9574_s1: s1 { - /* - * During kernel bootup, the SoC runs at 800MHz with 875mV set by the bootloaders. - * During regulator registration, kernel not knowing the initial voltage, - * considers it as zero and brings up the regulators with minimum supported voltage. - * Update the regulator-min-microvolt with SVS voltage of 725mV so that - * the regulators are brought up with 725mV which is sufficient for all the - * corner parts to operate at 800MHz - */ - regulator-min-microvolt = <725000>; - regulator-max-microvolt = <1075000>; - }; - }; -}; - -&sleep_clk { - clock-frequency = <32000>; -}; - -&tlmm { - spi_0_pins: spi-0-state { - pins = "gpio11", "gpio12", "gpio13", "gpio14"; - function = "blsp0_spi"; - drive-strength = <8>; - bias-disable; - }; -}; - -&xo_board_clk { - clock-frequency = <24000000>; };