[v2,23/27] ARM: dts: qcom: apq8064: move RPM regulators to board files

Message ID	20230702134320.98831-24-dmitry.baryshkov@linaro.org
State	New
Headers	show Return-Path: <linux-arm-msm-owner@vger.kernel.org> From: Dmitry Baryshkov <dmitry.baryshkov@linaro.org> To: Andy Gross <agross@kernel.org>, Bjorn Andersson <andersson@kernel.org>, Konrad Dybcio <konrad.dybcio@linaro.org>, Rob Herring <robh+dt@kernel.org>, Krzysztof Kozlowski <krzysztof.kozlowski+dt@linaro.org> Cc: linux-arm-msm@vger.kernel.org, devicetree@vger.kernel.org Subject: [PATCH v2 23/27] ARM: dts: qcom: apq8064: move RPM regulators to board files Date: Sun, 2 Jul 2023 16:43:16 +0300 Message-Id: <20230702134320.98831-24-dmitry.baryshkov@linaro.org> In-Reply-To: <20230702134320.98831-1-dmitry.baryshkov@linaro.org> References: <20230702134320.98831-1-dmitry.baryshkov@linaro.org> MIME-Version: 1.0 Content-Transfer-Encoding: 8bit Precedence: bulk
Series	ARM: dts: qcom: cleanup PMIC usage \| expand [v2,00/27] ARM: dts: qcom: cleanup PMIC usage [v2,01/27] ARM: dts: qcom: apq8064: correct XOADC register address [v2,02/27] ARM: dts: qcom: msm8960: introduce label for PMIC keypad [v2,03/27] ARM: dts: qcom: msm8660-surf: use keypad label directly [v2,04/27] ARM: dts: qcom: apq8064-nexus7: move sdcc1 node to proper place [v2,05/27] ARM: dts: qcom: mdm9615-wp8548-mangoh-green: group include clauses [v2,06/27] ARM: dts: qcom: strip prefix from PMIC files [v2,07/27] ARM: dts: qcom: apq8064: fix PMIC node labels [v2,08/27] ARM: dts: qcom: mdm9615: fix PMIC node labels [v2,09/27] ARM: dts: qcom: msm8660: fix PMIC node labels [v2,10/27] ARM: dts: qcom: msm8960: fix PMIC node labels [v2,11/27] ARM: dts: qcom: msm8960: split PMIC to separate dtsi files [v2,12/27] ARM: dts: qcom: apq8064: split PMICs to separate dtsi files [v2,13/27] ARM: dts: qcom: mdm9615: split PMIC to separate dtsi files [v2,14/27] ARM: dts: qcom: msm8660: split PMIC to separate dtsi files [v2,15/27] ARM: dts: qcom: pm8058: reorder nodes [v2,16/27] ARM: dts: qcom: pm8921: reorder nodes [v2,17/27] ARM: dts: qcom: pm8018: move reg property [v2,18/27] ARM: dts: qcom: pm8921: move reg property [v2,19/27] ARM: dts: qcom: pm8058: use defined IRQ flags [v2,20/27] ARM: dts: qcom: pm8921: switch to interrupts-extended [v2,21/27] ARM: dts: qcom: pm8018: switch to interrupts-extended [v2,22/27] ARM: dts: qcom: pm8058: switch to interrupts-extended [v2,23/27] ARM: dts: qcom: apq8064: move RPM regulators to board files [v2,24/27] ARM: dts: qcom: mdm9615: move RPM regulators to board files [v2,25/27] ARM: dts: qcom: msm8660: move RPM regulators to board files [v2,26/27] ARM: dts: qcom: msm8960: drop useless rpm regulators node [v2,27/27] ARM: dts: qcom: msm8974: move regulators to board files

diff --git a/arch/arm/boot/dts/qcom/qcom-apq8064-asus-nexus7-flo.dts b/arch/arm/boot/dts/qcom/qcom-apq8064-asus-nexus7-flo.dts index d5dee70620c2..1caa73e20bc9 100644 --- a/arch/arm/boot/dts/qcom/qcom-apq8064-asus-nexus7-flo.dts +++ b/arch/arm/boot/dts/qcom/qcom-apq8064-asus-nexus7-flo.dts @@ -192,22 +192,20 @@ &mdp_dsi1_out { &rpm { regulators { vdd_l1_l2_l12_l18-supply = <&pm8921_s4>; - vin_lvs1_3_6-supply = <&pm8921_s4>; - vin_lvs4_5_7-supply = <&pm8921_s4>; - - vdd_l24-supply = <&pm8921_s1>; vdd_l25-supply = <&pm8921_s1>; - vin_lvs2-supply = <&pm8921_s1>; - vdd_l26-supply = <&pm8921_s7>; vdd_l27-supply = <&pm8921_s7>; vdd_l28-supply = <&pm8921_s7>; + vin_lvs1_3_6-supply = <&pm8921_s4>; + vin_lvs2-supply = <&pm8921_s1>; + vin_lvs4_5_7-supply = <&pm8921_s4>; + vdd_ncp-supply = <&pm8921_l6>; /* Buck SMPS */ - s1 { + pm8921_s1: s1 { regulator-always-on; regulator-min-microvolt = <1225000>; regulator-max-microvolt = <1225000>; @@ -216,7 +214,7 @@ s1 { }; /* msm otg HSUSB_VDDCX */ - s3 { + pm8921_s3: s3 { regulator-min-microvolt = <500000>; regulator-max-microvolt = <1150000>; qcom,switch-mode-frequency = <4800000>; @@ -229,55 +227,58 @@ s3 { * tabla2x-slim-CDC_VDD_CP * tabla2x-slim-VDDIO_CDC */ - s4 { + pm8921_s4: s4 { regulator-min-microvolt = <1800000>; regulator-max-microvolt = <1800000>; qcom,switch-mode-frequency = <3200000>; regulator-always-on; }; - s7 { + pm8921_s7: s7 { regulator-min-microvolt = <1300000>; regulator-max-microvolt = <1300000>; qcom,switch-mode-frequency = <3200000>; }; /* mipi_dsi.1-dsi1_pll_vdda */ - l2 { + pm8921_l2: l2 { regulator-min-microvolt = <1200000>; regulator-max-microvolt = <1200000>; regulator-always-on; }; /* msm_otg-HSUSB_3p3 */ - l3 { + pm8921_l3: l3 { regulator-min-microvolt = <3075000>; regulator-max-microvolt = <3075000>; bias-pull-down; }; /* msm_otg-HSUSB_1p8 */ - l4 { + pm8921_l4: l4 { regulator-min-microvolt = <1800000>; regulator-max-microvolt = <1800000>; bias-pull-down; }; /* msm_sdcc.1-sdc_vdd */ - l5 { + pm8921_l5: l5 { regulator-min-microvolt = <2950000>; regulator-max-microvolt = <2950000>; regulator-always-on; bias-pull-down; }; - l6 { + pm8921_l6: l6 { regulator-min-microvolt = <2950000>; regulator-max-microvolt = <2950000>; }; + pm8921_l8: l8 { + }; + /* mipi_dsi.1-dsi1_avdd */ - l11 { + pm8921_l11: l11 { regulator-min-microvolt = <3000000>; regulator-max-microvolt = <3000000>; bias-pull-down; @@ -285,14 +286,14 @@ l11 { }; /* pwm_power for backlight */ - l17 { + pm8921_l17: l17 { regulator-min-microvolt = <3000000>; regulator-max-microvolt = <3000000>; regulator-always-on; }; /* camera, qdsp6 */ - l23 { + pm8921_l23: l23 { regulator-min-microvolt = <1800000>; regulator-max-microvolt = <1800000>; bias-pull-down; @@ -302,32 +303,32 @@ l23 { * tabla2x-slim-CDC_VDDA_A_1P2V * tabla2x-slim-VDDD_CDC_D */ - l25 { + pm8921_l25: l25 { regulator-min-microvolt = <1250000>; regulator-max-microvolt = <1250000>; bias-pull-down; }; - lvs1 { + pm8921_lvs1: lvs1 { bias-pull-down; }; - lvs4 { + pm8921_lvs4: lvs4 { bias-pull-down; }; - lvs5 { + pm8921_lvs5: lvs5 { bias-pull-down; }; - lvs6 { + pm8921_lvs6: lvs6 { bias-pull-down; }; /* * mipi_dsi.1-dsi1_vddio * pil_riva-pll_vdd */ - lvs7 { + pm8921_lvs7: lvs7 { bias-pull-down; }; }; diff --git a/arch/arm/boot/dts/qcom/qcom-apq8064-cm-qs600.dts b/arch/arm/boot/dts/qcom/qcom-apq8064-cm-qs600.dts index ffd654ab0b57..6472277d1c6d 100644 --- a/arch/arm/boot/dts/qcom/qcom-apq8064-cm-qs600.dts +++ b/arch/arm/boot/dts/qcom/qcom-apq8064-cm-qs600.dts @@ -85,10 +85,6 @@ pinconf { &rpm { regulators { - vin_lvs1_3_6-supply = <&pm8921_s4>; - vin_lvs2-supply = <&pm8921_s1>; - vin_lvs4_5_7-supply = <&pm8921_s4>; - vdd_l1_l2_l12_l18-supply = <&pm8921_s4>; vdd_l24-supply = <&pm8921_s1>; vdd_l25-supply = <&pm8921_s1>; @@ -96,9 +92,12 @@ regulators { vdd_l27-supply = <&pm8921_s7>; vdd_l28-supply = <&pm8921_s7>; + vin_lvs1_3_6-supply = <&pm8921_s4>; + vin_lvs2-supply = <&pm8921_s1>; + vin_lvs4_5_7-supply = <&pm8921_s4>; /* Buck SMPS */ - s1 { + pm8921_s1: s1 { regulator-always-on; regulator-min-microvolt = <1225000>; regulator-max-microvolt = <1225000>; @@ -106,52 +105,51 @@ s1 { bias-pull-down; }; - s3 { + pm8921_s3: s3 { regulator-min-microvolt = <1000000>; regulator-max-microvolt = <1400000>; qcom,switch-mode-frequency = <4800000>; }; - s4 { + pm8921_s4: s4 { regulator-min-microvolt = <1800000>; regulator-max-microvolt = <1800000>; qcom,switch-mode-frequency = <3200000>; }; - s7 { + pm8921_s7: s7 { regulator-min-microvolt = <1300000>; regulator-max-microvolt = <1300000>; qcom,switch-mode-frequency = <3200000>; }; - l3 { + pm8921_l3: l3 { regulator-min-microvolt = <3050000>; regulator-max-microvolt = <3300000>; bias-pull-down; }; - l4 { + pm8921_l4: l4 { regulator-min-microvolt = <1000000>; regulator-max-microvolt = <1800000>; bias-pull-down; }; - l5 { + pm8921_l5: l5 { regulator-min-microvolt = <2750000>; regulator-max-microvolt = <3000000>; bias-pull-down; }; - l23 { + pm8921_l23: l23 { regulator-min-microvolt = <1700000>; regulator-max-microvolt = <1900000>; bias-pull-down; }; - lvs6 { + pm8921_lvs6: lvs6 { bias-pull-down; }; - }; }; diff --git a/arch/arm/boot/dts/qcom/qcom-apq8064-ifc6410.dts b/arch/arm/boot/dts/qcom/qcom-apq8064-ifc6410.dts index 12bf8ea3fb93..39c44fae9d14 100644 --- a/arch/arm/boot/dts/qcom/qcom-apq8064-ifc6410.dts +++ b/arch/arm/boot/dts/qcom/qcom-apq8064-ifc6410.dts @@ -196,10 +196,6 @@ pinconf { &rpm { regulators { - vin_lvs1_3_6-supply = <&pm8921_s4>; - vin_lvs2-supply = <&pm8921_s1>; - vin_lvs4_5_7-supply = <&pm8921_s4>; - vdd_l1_l2_l12_l18-supply = <&pm8921_s4>; vdd_l24-supply = <&pm8921_s1>; vdd_l25-supply = <&pm8921_s1>; @@ -207,9 +203,12 @@ regulators { vdd_l27-supply = <&pm8921_s7>; vdd_l28-supply = <&pm8921_s7>; + vin_lvs1_3_6-supply = <&pm8921_s4>; + vin_lvs2-supply = <&pm8921_s1>; + vin_lvs4_5_7-supply = <&pm8921_s4>; /* Buck SMPS */ - s1 { + pm8921_s1: s1 { regulator-always-on; regulator-min-microvolt = <1225000>; regulator-max-microvolt = <1225000>; @@ -217,59 +216,63 @@ s1 { bias-pull-down; }; - s3 { + pm8921_s3: s3 { regulator-min-microvolt = <1000000>; regulator-max-microvolt = <1400000>; qcom,switch-mode-frequency = <4800000>; }; - s4 { + pm8921_s4: s4 { regulator-min-microvolt = <1800000>; regulator-max-microvolt = <1800000>; qcom,switch-mode-frequency = <3200000>; }; - s7 { + pm8921_s7: s7 { regulator-min-microvolt = <1300000>; regulator-max-microvolt = <1300000>; qcom,switch-mode-frequency = <3200000>; }; - l3 { + pm8921_l3: l3 { regulator-min-microvolt = <3050000>; regulator-max-microvolt = <3300000>; bias-pull-down; }; - l4 { + pm8921_l4: l4 { regulator-min-microvolt = <1000000>; regulator-max-microvolt = <1800000>; bias-pull-down; }; - l5 { + pm8921_l5: l5 { regulator-min-microvolt = <2750000>; regulator-max-microvolt = <3000000>; bias-pull-down; }; - l6 { + pm8921_l6: l6 { regulator-min-microvolt = <2950000>; regulator-max-microvolt = <2950000>; bias-pull-down; }; - l23 { + pm8921_l23: l23 { regulator-min-microvolt = <1700000>; regulator-max-microvolt = <1900000>; bias-pull-down; }; - lvs1 { + pm8921_lvs1: lvs1 { + bias-pull-down; + }; + + pm8921_lvs6: lvs6 { bias-pull-down; }; - lvs6 { + pm8921_hdmi_switch: hdmi-switch { bias-pull-down; }; }; diff --git a/arch/arm/boot/dts/qcom/qcom-apq8064-sony-xperia-lagan-yuga.dts b/arch/arm/boot/dts/qcom/qcom-apq8064-sony-xperia-lagan-yuga.dts index 53dd9d79556f..6988bd212924 100644 --- a/arch/arm/boot/dts/qcom/qcom-apq8064-sony-xperia-lagan-yuga.dts +++ b/arch/arm/boot/dts/qcom/qcom-apq8064-sony-xperia-lagan-yuga.dts @@ -85,23 +85,36 @@ gpio_keys_pin_a: gpio-keys-active-state { &riva { pinctrl-names = "default"; pinctrl-0 = <&riva_wlan_pin_a>, <&riva_bt_pin_a>, <&riva_fm_pin_a>; + + vddcx-supply = <&pm8921_s3>; + vddmx-supply = <&pm8921_l24>; + vddpx-supply = <&pm8921_s4>; + status = "okay"; + + iris { + vddxo-supply = <&pm8921_l4>; + vddrfa-supply = <&pm8921_s2>; + vddpa-supply = <&pm8921_l10>; + vdddig-supply = <&pm8921_lvs2>; + }; }; &rpm { regulators { vin_l1_l2_l12_l18-supply = <&pm8921_s4>; - vin_lvs_1_3_6-supply = <&pm8921_s4>; - vin_lvs_4_5_7-supply = <&pm8921_s4>; - vin_ncp-supply = <&pm8921_l6>; - vin_lvs2-supply = <&pm8921_s4>; vin_l24-supply = <&pm8921_s1>; vin_l25-supply = <&pm8921_s1>; vin_l27-supply = <&pm8921_s7>; vin_l28-supply = <&pm8921_s7>; + vin_lvs_1_3_6-supply = <&pm8921_s4>; + vin_lvs2-supply = <&pm8921_s4>; + vin_lvs_4_5_7-supply = <&pm8921_s4>; + vin_ncp-supply = <&pm8921_l6>; + /* Buck SMPS */ - s1 { + pm8921_s1: s1 { regulator-always-on; regulator-min-microvolt = <1225000>; regulator-max-microvolt = <1225000>; @@ -109,21 +122,21 @@ s1 { bias-pull-down; }; - s2 { + pm8921_s2: s2 { regulator-min-microvolt = <1300000>; regulator-max-microvolt = <1300000>; qcom,switch-mode-frequency = <1600000>; bias-pull-down; }; - s3 { + pm8921_s3: s3 { regulator-min-microvolt = <500000>; regulator-max-microvolt = <1150000>; qcom,switch-mode-frequency = <4800000>; bias-pull-down; }; - s4 { + pm8921_s4: s4 { regulator-always-on; regulator-min-microvolt = <1800000>; regulator-max-microvolt = <1800000>; @@ -132,205 +145,207 @@ s4 { qcom,force-mode = <QCOM_RPM_FORCE_MODE_AUTO>; }; - s7 { + pm8921_s7: s7 { regulator-min-microvolt = <1300000>; regulator-max-microvolt = <1300000>; qcom,switch-mode-frequency = <3200000>; }; - s8 { + pm8921_s8: s8 { regulator-min-microvolt = <2200000>; regulator-max-microvolt = <2200000>; qcom,switch-mode-frequency = <1600000>; }; /* PMOS LDO */ - l1 { + pm8921_l1: l1 { regulator-always-on; regulator-min-microvolt = <1100000>; regulator-max-microvolt = <1100000>; bias-pull-down; }; - l2 { + pm8921_l2: l2 { regulator-min-microvolt = <1200000>; regulator-max-microvolt = <1200000>; bias-pull-down; }; - l3 { + pm8921_l3: l3 { regulator-min-microvolt = <3075000>; regulator-max-microvolt = <3075000>; bias-pull-down; }; - l4 { + pm8921_l4: l4 { regulator-always-on; regulator-min-microvolt = <1800000>; regulator-max-microvolt = <1800000>; bias-pull-down; }; - l5 { + pm8921_l5: l5 { regulator-min-microvolt = <2950000>; regulator-max-microvolt = <2950000>; bias-pull-down; }; - l6 { + pm8921_l6: l6 { regulator-min-microvolt = <2950000>; regulator-max-microvolt = <2950000>; bias-pull-down; }; - l7 { + pm8921_l7: l7 { regulator-min-microvolt = <1850000>; regulator-max-microvolt = <2950000>; bias-pull-down; }; - l8 { + pm8921_l8: l8 { regulator-min-microvolt = <2800000>; regulator-max-microvolt = <2800000>; bias-pull-down; }; - l9 { + pm8921_l9: l9 { regulator-min-microvolt = <3000000>; regulator-max-microvolt = <3000000>; bias-pull-down; }; - l10 { + pm8921_l10: l10 { regulator-min-microvolt = <2900000>; regulator-max-microvolt = <2900000>; bias-pull-down; }; - l11 { + pm8921_l11: l11 { regulator-min-microvolt = <3000000>; regulator-max-microvolt = <3000000>; bias-pull-down; }; - l12 { + pm8921_l12: l12 { regulator-min-microvolt = <1200000>; regulator-max-microvolt = <1200000>; bias-pull-down; }; - l14 { + pm8921_l14: l14 { regulator-min-microvolt = <1800000>; regulator-max-microvolt = <1800000>; bias-pull-down; }; - l15 { + pm8921_l15: l15 { regulator-min-microvolt = <1800000>; regulator-max-microvolt = <2950000>; bias-pull-down; }; - l16 { + pm8921_l16: l16 { regulator-min-microvolt = <2800000>; regulator-max-microvolt = <2800000>; bias-pull-down; }; - l17 { + pm8921_l17: l17 { regulator-min-microvolt = <2000000>; regulator-max-microvolt = <2000000>; bias-pull-down; }; - l18 { + pm8921_l18: l18 { regulator-min-microvolt = <1200000>; regulator-max-microvolt = <1200000>; bias-pull-down; }; - l21 { + pm8921_l21: l21 { regulator-min-microvolt = <1050000>; regulator-max-microvolt = <1050000>; bias-pull-down; }; - l22 { + pm8921_l22: l22 { regulator-min-microvolt = <2600000>; regulator-max-microvolt = <2600000>; bias-pull-down; }; - l23 { + pm8921_l23: l23 { regulator-min-microvolt = <1800000>; regulator-max-microvolt = <1800000>; bias-pull-down; }; - l24 { + pm8921_l24: l24 { regulator-min-microvolt = <750000>; regulator-max-microvolt = <1150000>; bias-pull-down; }; - l25 { + pm8921_l25: l25 { regulator-always-on; regulator-min-microvolt = <1250000>; regulator-max-microvolt = <1250000>; bias-pull-down; }; - l27 { + pm8921_l27: l27 { regulator-min-microvolt = <1100000>; regulator-max-microvolt = <1100000>; }; - l28 { + pm8921_l28: l28 { regulator-min-microvolt = <1050000>; regulator-max-microvolt = <1050000>; bias-pull-down; }; - l29 { + pm8921_l29: l29 { regulator-min-microvolt = <2000000>; regulator-max-microvolt = <2000000>; bias-pull-down; }; /* Low Voltage Switch */ - lvs1 { + pm8921_lvs1: lvs1 { bias-pull-down; }; - lvs2 { + pm8921_lvs2: lvs2 { bias-pull-down; }; - lvs3 { + pm8921_lvs3: lvs3 { bias-pull-down; }; - lvs4 { + pm8921_lvs4: lvs4 { bias-pull-down; }; - lvs5 { + pm8921_lvs5: lvs5 { bias-pull-down; }; - lvs6 { + pm8921_lvs6: lvs6 { bias-pull-down; }; - lvs7 { + pm8921_lvs7: lvs7 { bias-pull-down; }; - usb-switch {}; + pm8921_usb_switch: usb-switch {}; - hdmi-switch {}; + pm8921_hdmi_switch: hdmi-switch { + bias-pull-down; + }; - ncp { + pm8921_ncp: ncp { regulator-min-microvolt = <1800000>; regulator-max-microvolt = <1800000>; qcom,switch-mode-frequency = <1600000>; diff --git a/arch/arm/boot/dts/qcom/qcom-apq8064.dtsi b/arch/arm/boot/dts/qcom/qcom-apq8064.dtsi index 2a5a3b2fb8e9..36c68ee5be65 100644 --- a/arch/arm/boot/dts/qcom/qcom-apq8064.dtsi +++ b/arch/arm/boot/dts/qcom/qcom-apq8064.dtsi @@ -795,60 +795,6 @@ rpmcc: clock-controller { clocks = <&pxo_board>, <&cxo_board>; clock-names = "pxo", "cxo"; }; - - regulators { - compatible = "qcom,rpm-pm8921-regulators"; - - pm8921_s1: s1 {}; - pm8921_s2: s2 {}; - pm8921_s3: s3 {}; - pm8921_s4: s4 {}; - pm8921_s7: s7 {}; - pm8921_s8: s8 {}; - - pm8921_l1: l1 {}; - pm8921_l2: l2 {}; - pm8921_l3: l3 {}; - pm8921_l4: l4 {}; - pm8921_l5: l5 {}; - pm8921_l6: l6 {}; - pm8921_l7: l7 {}; - pm8921_l8: l8 {}; - pm8921_l9: l9 {}; - pm8921_l10: l10 {}; - pm8921_l11: l11 {}; - pm8921_l12: l12 {}; - pm8921_l14: l14 {}; - pm8921_l15: l15 {}; - pm8921_l16: l16 {}; - pm8921_l17: l17 {}; - pm8921_l18: l18 {}; - pm8921_l21: l21 {}; - pm8921_l22: l22 {}; - pm8921_l23: l23 {}; - pm8921_l24: l24 {}; - pm8921_l25: l25 {}; - pm8921_l26: l26 {}; - pm8921_l27: l27 {}; - pm8921_l28: l28 {}; - pm8921_l29: l29 {}; - - pm8921_lvs1: lvs1 {}; - pm8921_lvs2: lvs2 {}; - pm8921_lvs3: lvs3 {}; - pm8921_lvs4: lvs4 {}; - pm8921_lvs5: lvs5 {}; - pm8921_lvs6: lvs6 {}; - pm8921_lvs7: lvs7 {}; - - pm8921_usb_switch: usb-switch {}; - - pm8921_hdmi_switch: hdmi-switch { - bias-pull-down; - }; - - pm8921_ncp: ncp {}; - }; }; usb1: usb@12500000 { @@ -1528,10 +1474,6 @@ riva: riva-pil@3200800 { memory-region = <&wcnss_mem>; - vddcx-supply = <&pm8921_s3>; - vddmx-supply = <&pm8921_l24>; - vddpx-supply = <&pm8921_s4>; - status = "disabled"; iris { @@ -1539,11 +1481,6 @@ iris { clocks = <&cxo_board>; clock-names = "xo"; - - vddxo-supply = <&pm8921_l4>; - vddrfa-supply = <&pm8921_s2>; - vddpa-supply = <&pm8921_l10>; - vdddig-supply = <&pm8921_lvs2>; }; smd-edge {

[v2,23/27] ARM: dts: qcom: apq8064: move RPM regulators to board files

Commit Message

Patch