diff mbox series

[5/7] arm64: dts: qcom: pm6150: Add resin and rtc nodes

Message ID 20230704163848.169853-7-davidwronek@gmail.com
State Superseded
Headers show
Series Add initial support for SM7125 and Xiaomi SM7125 platform | expand

Commit Message

David Wronek July 4, 2023, 4:31 p.m. UTC 
Add support for the RTC which is the same as on other PMICs and add the
resin child node to the PM6150 PON device and disable it by default.

Signed-off-by: David Wronek <davidwronek@gmail.com>
---
 arch/arm64/boot/dts/qcom/pm6150.dtsi | 15 +++++++++++++++
 1 file changed, 15 insertions(+)
diff mbox series

Patch

diff --git a/arch/arm64/boot/dts/qcom/pm6150.dtsi b/arch/arm64/boot/dts/qcom/pm6150.dtsi
index 2e6afa296141..9a7c532f7a12 100644
--- a/arch/arm64/boot/dts/qcom/pm6150.dtsi
+++ b/arch/arm64/boot/dts/qcom/pm6150.dtsi
@@ -53,6 +53,14 @@  pm6150_pwrkey: pwrkey {
 				bias-pull-up;
 				linux,code = <KEY_POWER>;
 			};
+
+			pm6150_resin: resin {
+				compatible = "qcom,pm8941-resin";
+				interrupts = <GIC_SPI 0x8 1 IRQ_TYPE_EDGE_BOTH>;
+				debounce = <15625>;
+				bias-pull-up;
+				status = "disabled";
+			};
 		};
 
 		pm6150_temp: temp-alarm@2400 {
@@ -88,6 +96,13 @@  pm6150_adc_tm: adc-tm@3500 {
 			status = "disabled";
 		};
 
+		rtc@6000 {
+			compatible = "qcom,pm8941-rtc";
+			reg = <0x6000>, <0x6100>;
+			reg-names = "rtc", "alarm";
+			interrupts = <0x0 0x61 0x1 IRQ_TYPE_NONE>;
+		};
+
 		pm6150_gpios: gpio@c000 {
 			compatible = "qcom,pm6150-gpio", "qcom,spmi-gpio";
 			reg = <0xc000>;