diff mbox series

[v3,6/9] arm64: dts: qcom: msm8939: Drop RPM bus clocks

Message ID 20230721-topic-rpm_clk_cleanup-v3-6-a66e698932e3@linaro.org
State Accepted
Commit 09ee216d0b9f63f44fa59651a9e7403c8fd05ea8
Headers show
Series Clean up RPM bus clocks remnants | expand

Commit Message

Konrad Dybcio Jan. 3, 2024, 8:15 p.m. UTC
Some nodes are abusingly referencing some of the internal bus clocks,
that were recently removed in Linux (because the original implementation
did not make much sense), managing them as if they were the only devices
on an NoC bus.

These clocks are now handled from within the icc framework and are
no longer registered from within the CCF. Remove them.

Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Signed-off-by: Konrad Dybcio <konrad.dybcio@linaro.org>
---
 arch/arm64/boot/dts/qcom/msm8939.dtsi | 12 ------------
 1 file changed, 12 deletions(-)
diff mbox series

Patch

diff --git a/arch/arm64/boot/dts/qcom/msm8939.dtsi b/arch/arm64/boot/dts/qcom/msm8939.dtsi
index 29f6bd9df2eb..82d85ff61045 100644
--- a/arch/arm64/boot/dts/qcom/msm8939.dtsi
+++ b/arch/arm64/boot/dts/qcom/msm8939.dtsi
@@ -602,9 +602,6 @@  rpm_msg_ram: sram@60000 {
 		bimc: interconnect@400000 {
 			compatible = "qcom,msm8939-bimc";
 			reg = <0x00400000 0x62000>;
-			clock-names = "bus", "bus_a";
-			clocks = <&rpmcc RPM_SMD_BIMC_CLK>,
-				 <&rpmcc RPM_SMD_BIMC_A_CLK>;
 			#interconnect-cells = <1>;
 		};
 
@@ -648,25 +645,16 @@  restart@4ab000 {
 		pcnoc: interconnect@500000 {
 			compatible = "qcom,msm8939-pcnoc";
 			reg = <0x00500000 0x11000>;
-			clock-names = "bus", "bus_a";
-			clocks = <&rpmcc RPM_SMD_PCNOC_CLK>,
-				 <&rpmcc RPM_SMD_PCNOC_A_CLK>;
 			#interconnect-cells = <1>;
 		};
 
 		snoc: interconnect@580000 {
 			compatible = "qcom,msm8939-snoc";
 			reg = <0x00580000 0x14080>;
-			clock-names = "bus", "bus_a";
-			clocks = <&rpmcc RPM_SMD_SNOC_CLK>,
-				 <&rpmcc RPM_SMD_SNOC_A_CLK>;
 			#interconnect-cells = <1>;
 
 			snoc_mm: interconnect-snoc {
 				compatible = "qcom,msm8939-snoc-mm";
-				clock-names = "bus", "bus_a";
-				clocks = <&rpmcc RPM_SMD_SYSMMNOC_CLK>,
-					 <&rpmcc RPM_SMD_SYSMMNOC_A_CLK>;
 				#interconnect-cells = <1>;
 			};
 		};