| Message ID | 20230924183103.49487-2-krzysztof.kozlowski@linaro.org |
|---|---|
| State | Accepted |
| Commit | f64f653df2ef713359178c731bc8f89ff54014b1 |
| Headers | show |
| Series | [RESEND,1/3] ARM: dts: qcom: sdx65: correct PCIe EP phy-names | expand |
On Sun, 24 Sept 2023 at 21:31, Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org> wrote: > > The SDX65 GCC clock controller expects two required clocks: > pcie_pipe_clk and usb3_phy_wrapper_gcc_usb30_pipe_clk. The first one is > provided by existing phy node, but second is not yet implemented. > > qcom-sdx65-mtp.dtb: clock-controller@100000: clocks: [[11, 0], [11, 1], [12]] is too short > qcom-sdx65-mtp.dtb: clock-controller@100000: clock-names: ['bi_tcxo', 'bi_tcxo_ao', 'sleep_clk'] is too short > > Reviewed-by: Konrad Dybcio <konrad.dybcio@linaro.org> > Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org> > --- > arch/arm/boot/dts/qcom/qcom-sdx65.dtsi | 12 ++++++++++-- > 1 file changed, 10 insertions(+), 2 deletions(-) > > diff --git a/arch/arm/boot/dts/qcom/qcom-sdx65.dtsi b/arch/arm/boot/dts/qcom/qcom-sdx65.dtsi > index c9790217320b..4a8cc28fa1db 100644 > --- a/arch/arm/boot/dts/qcom/qcom-sdx65.dtsi > +++ b/arch/arm/boot/dts/qcom/qcom-sdx65.dtsi > @@ -204,8 +204,16 @@ soc: soc { > gcc: clock-controller@100000 { > compatible = "qcom,gcc-sdx65"; > reg = <0x00100000 0x001f7400>; > - clocks = <&rpmhcc RPMH_CXO_CLK>, <&rpmhcc RPMH_CXO_CLK_A>, <&sleep_clk>; > - clock-names = "bi_tcxo", "bi_tcxo_ao", "sleep_clk"; > + clocks = <&rpmhcc RPMH_CXO_CLK>, > + <&rpmhcc RPMH_CXO_CLK_A>, > + <&sleep_clk>, > + <&pcie_phy>, > + <0>; Maybe <&usb_ssphy> or <&usb_qmpphy>? > + clock-names = "bi_tcxo", > + "bi_tcxo_ao", > + "sleep_clk", > + "pcie_pipe_clk", > + "usb3_phy_wrapper_gcc_usb30_pipe_clk"; > #power-domain-cells = <1>; > #clock-cells = <1>; > #reset-cells = <1>; > -- > 2.34.1 >
diff --git a/arch/arm/boot/dts/qcom/qcom-sdx65.dtsi b/arch/arm/boot/dts/qcom/qcom-sdx65.dtsi index c9790217320b..4a8cc28fa1db 100644 --- a/arch/arm/boot/dts/qcom/qcom-sdx65.dtsi +++ b/arch/arm/boot/dts/qcom/qcom-sdx65.dtsi @@ -204,8 +204,16 @@ soc: soc { gcc: clock-controller@100000 { compatible = "qcom,gcc-sdx65"; reg = <0x00100000 0x001f7400>; - clocks = <&rpmhcc RPMH_CXO_CLK>, <&rpmhcc RPMH_CXO_CLK_A>, <&sleep_clk>; - clock-names = "bi_tcxo", "bi_tcxo_ao", "sleep_clk"; + clocks = <&rpmhcc RPMH_CXO_CLK>, + <&rpmhcc RPMH_CXO_CLK_A>, + <&sleep_clk>, + <&pcie_phy>, + <0>; + clock-names = "bi_tcxo", + "bi_tcxo_ao", + "sleep_clk", + "pcie_pipe_clk", + "usb3_phy_wrapper_gcc_usb30_pipe_clk"; #power-domain-cells = <1>; #clock-cells = <1>; #reset-cells = <1>;