| Message ID | 20231111164229.63803-2-krzysztof.kozlowski@linaro.org |
|---|---|
| State | Accepted |
| Commit | 9a1bd36aeb31649bc499f87671b76c7d117197e6 |
| Headers | show |
| Series | [1/6] arm64: dts: qcom: sc8180x-flex-5g: use 'gpios' suffix for PCI GPIOs | expand |
diff --git a/arch/arm64/boot/dts/qcom/sc8180x-primus.dts b/arch/arm64/boot/dts/qcom/sc8180x-primus.dts index fd2fab4895b3..8eec33661ef6 100644 --- a/arch/arm64/boot/dts/qcom/sc8180x-primus.dts +++ b/arch/arm64/boot/dts/qcom/sc8180x-primus.dts @@ -531,8 +531,8 @@ mdss_edp_out: endpoint { }; &pcie1 { - perst-gpio = <&tlmm 175 GPIO_ACTIVE_LOW>; - wake-gpio = <&tlmm 177 GPIO_ACTIVE_HIGH>; + perst-gpios = <&tlmm 175 GPIO_ACTIVE_LOW>; + wake-gpios = <&tlmm 177 GPIO_ACTIVE_HIGH>; pinctrl-names = "default"; pinctrl-0 = <&pcie2_default_state>;
Linux handles both versions, but bindings expect GPIO properties to have 'gpios' suffix instead of 'gpio': sc8180x-primus.dtb: pci@1c10000: Unevaluated properties are not allowed ('perst-gpio', 'wake-gpio' were unexpected) Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org> --- arch/arm64/boot/dts/qcom/sc8180x-primus.dts | 4 ++-- 1 file changed, 2 insertions(+), 2 deletions(-)